How to reset the maintenance light on a Skoda Superb?
2 Answers
Skoda Superb maintenance light reset method is as follows: 1. Turn off the ignition switch (engine off); 2. Press and hold the 0.0/SET (reset/setting) button on the instrument panel; 3. Turn on the ignition switch while keeping the 0.0/SET (reset/setting) button pressed with your left hand; 4. When one of the following messages appears on the instrument panel display, release the 0.0/SET (reset/setting) button. Additional relevant information: 1. The Skoda Superb is an automobile brand launched by Shanghai Volkswagen Automotive Co., Ltd. 2. In terms of body dimensions, the Skoda Superb measures 4.838 meters in length, 1.817 meters in width, and 1.462 meters in height.
Last year, the maintenance light on my Superb came on, and going to the 4S shop was too troublesome, so I did it myself. The key steps are to first turn the ignition key to the OFF position, locate the TRIP button or the 0.0 mark on the dashboard, hold it down without releasing, turn the key to ON without starting the engine, and hold for a few seconds until the light goes off. The button position may vary depending on the model year—for the 2010 model, it was usually on the left pillar but later moved to the center, so it’s best to check the manual for confirmation. After resetting, make sure to stick to the maintenance schedule—this light is just a reminder system and shouldn’t mislead you about the actual condition of your car. Regular oil changes and tire checks are the core of maintenance to avoid costly major repairs. If the light comes back on after resetting, it could be due to wiring contact issues or sensor failure, so it’s best to have it checked by a professional shop—don’t take risks, safety first.
