How to Reset the Maintenance Light on a Qingling Pickup Truck?

Are SUVs Fuel-Consuming?

Fuel consumption in SUVs is primarily due to their heavier weight and higher aerodynamic drag at high speeds, which leads to slightly higher fuel consumption. However, the difference is not significant, so there's no need to overly worry about SUV fuel consumption (assuming we're not discussing city SUVs and hardcore off-road SUVs). Simply put, four-wheel drive consumes more fuel than two-wheel drive, and larger engine displacement tends to use more fuel. Taking city SUVs as an example, the fuel consumption of two-wheel-drive models is similar to that of cars with the same platform and powertrain configuration (mostly true, with some exceptions). For instance, the two-wheel-drive CR-V 2.0 model might only consume about 1L more per 100 kilometers compared to a 1.8L Civic. The fuel consumption of some compact SUVs, such as the Encore, Ecosport, and ix25, is comparable to that of regular compact cars. For the same vehicle, the four-wheel-drive version consumes about 1L more per 100 kilometers than the two-wheel-drive version. Pure off-road SUVs and all-terrain SUVs are a different story—their fuel consumption can vary wildly depending on usage. Of course, consumers who buy those models typically don't prioritize fuel efficiency.

19

3

Share

What is the typical fuel consumption on highways?

Highway fuel consumption is generally around 5.5-6 liters per 100 kilometers. How to save fuel: It depends on the speed. To save fuel on highways, try to keep the speed below 120 km/h. Normally, the most fuel-efficient state is achieved by maintaining a constant speed in the highest gear (preferably with a constant engine speed and unchanged gear) after shifting to the highest gear. Constant-speed fuel consumption: Constant-speed fuel consumption refers to the fuel economy indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90 km/h and 120 km/h as the main evaluation indicators for fuel economy. China also adopts this indicator. The fuel consumption per 100 kilometers indicated in the manuals of domestic cars is generally the constant-speed fuel consumption. However, since cars often experience various working conditions such as acceleration, deceleration, braking, and engine idling during actual driving, the constant-speed fuel consumption is often lower and differs significantly from the actual fuel consumption. This difference is even greater for cars frequently used for short-distance driving in urban areas.

17

2

Share

Introduction to the Mercedes-Benz Windshield Wiper Washer Switch

Mercedes-Benz wiper washer switch is generally located on the left side of the steering wheel, combined with the light control on one lever. The following are the maintenance methods for Mercedes-Benz wipers: 1. Pay attention to whether the swing range of the upper and lower wipers is consistent. If not synchronized, correct it in time. 2. When the wiper makes a heavy sound during operation, adjust it promptly. 3. After the wiper wipes several times, if some water remains on the windshield, it may indicate that the rubber strip is aging. 4. Do not operate the wiper dry, as it not only damages the wiper itself but can also cause significant harm to the glass if there are foreign objects. 5. Lubricate the wiper regularly, frequently adding lubricant at the joint of the wiper arm to reduce mechanical friction. 6. Remove debris promptly. If the car glass has accumulated many dead branches and leaves after being parked for a long time, do not use the wiper to scrape the debris directly. 7. In snowy conditions, if the windshield is covered with thick snow, do not turn on the wiper directly to clear the snow, as the weight of the snow may cause the wiper to break.

10

5

Share

Reasons for the Burning of Mitsubishi Elevator Temperature Fuse?

Fault reason: The drive board is damaged. This fault belongs to the short-circuit type, and the fault persists. The fault phenomenon is that the power supply board temperature fuse burns out immediately after power is applied. After removing all the connectors from the power supply board and reapplying power, the temperature fuse no longer burns out, thus ruling out the power supply board as the issue. Next, after disconnecting the rectifier module wires and measuring the continuity of the rectifier module, no issues were found, thereby eliminating the rectifier module as the problem. Then, after disconnecting the large capacitor wires and measuring the capacitor's continuity, the capacitor showed no problems, so we ruled out the capacitor. Subsequently, after unplugging the JAC connector from the drive board and measuring the continuity of the two remaining pins on the drive board, it showed continuity, indicating an issue with the drive board or its associated circuits. Further, after removing the drive board and measuring the continuity of the JAC connector again, it still showed continuity, confirming that the drive board was faulty. This fault was successfully resolved. Actually, we haven't ruled out the module here, as this fault could be caused by the module leading to drive damage. However, it's difficult to determine the module's condition on-site unless there is a very obvious short-circuit fault in the module.

2

1

Share

Will Water Enter the Chassis When Driving Through Deep Water?

Vehicle driving through water will not cause water to enter the chassis. Impact of driving through water: As long as the water level does not reach half of the wheel, it will not cause water to enter the engine's intake system. If the water level reaches half of the wheel or even higher, the engine, electronic devices, components, and wiring in the car will be affected. Waterlogging insurance: Waterlogging insurance refers to an additional insurance purchased by the car owner for the engine. Waterlogging insurance, also known as commercial vehicle damage insurance or special loss insurance for car engines, is called differently by each auto insurance company but is essentially the same. This is a newly derived insurance type, all referring to the additional insurance purchased by the car buyer for the car engine.

4

5

Share

What happens if the c200l keeps the engine running while parked?

Keeping the c200l's engine running while parked allows the coolant to continue circulating and dissipating heat. Purpose: Keeping the engine running while parked means leaving the engine idling after stopping the car. Generally, this is only necessary if the engine is overheating, as it allows the coolant to continue circulating and dissipating heat. Another scenario is when the battery is low on charge, requiring the engine to idle for a period to recharge it. Idle State: Idling is an operational state of a car where the engine runs in neutral gear. The engine speed during idling is referred to as the idle speed. Idle speed can be adjusted by modifying the throttle opening, among other methods. Idling means the engine is running but not performing work. The idle condition is when the engine operates without load, meaning the clutch is engaged, and the transmission is in neutral (for automatic transmission vehicles, it should be in Park or P position). For vehicles with a carburetor fuel system, the choke should be fully open, and the accelerator pedal should be completely released. The engine's idle performance significantly impacts emissions, fuel consumption, and comfort, making it an important metric for evaluating engine performance. During idling, the engine is disconnected from the drivetrain, and the accelerator pedal is fully released, meaning the engine only overcomes its internal resistance without outputting any work. The engine speed during idling is called the idle speed, which should not be too high or too low. Excessively high idle speed increases fuel consumption, while excessively low idle speed can cause instability. The lowest idle speed that ensures stable engine operation is considered the optimal idle speed.

17

3

Share

How to Reset the Maintenance Light on a Qingling Pickup Truck?

Are SUVs Fuel-Consuming?

What is the typical fuel consumption on highways?

Introduction to the Mercedes-Benz Windshield Wiper Washer Switch

Reasons for the Burning of Mitsubishi Elevator Temperature Fuse?

Will Water Enter the Chassis When Driving Through Deep Water?

What happens if the c200l keeps the engine running while parked?

How to Report Other Vehicles' Traffic Violations for Bonus Points on Traffic Management 12123?

What is the wheelbase of the Mercedes-Benz E-Class AMG Coupe?

What is the speed limit on the Tuhe Expressway?

What are the exterior differences between the GT50 and GT63?