How to reset the maintenance light on a Kia K5?

How to Deal with Diesel Engine Overheating?

Common causes of frequent overheating in diesel engines include insufficient coolant, loose or faulty fan belts, and poor radiator performance. Below are detailed explanations and solutions: 1. Insufficient coolant. Solution: Regularly check the coolant level in the radiator and expansion tank, and replenish it promptly when low. A lack of coolant in the diesel engine's cooling system can impair heat dissipation, leading to overheating. 2. Loose or faulty fan belt. Solution: Tighten the fan belt or replace it directly. If the cooling fan is faulty, the motor and circuit need to be inspected and repaired. 3. Poor radiator performance. Solution: Debris on the radiator surface can reduce its cooling efficiency. Have it cleaned at a 4S shop.

13

5

Share

How many points are deducted for not using turn signals during parallel parking?

Not using turn signals or using them incorrectly results in a deduction of 10 points per occurrence. The specific regulations are as follows: Failure to use or incorrect use of turn signals before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. Activating the turn signal for less than 3 seconds before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. There are 6 instances in Subject 2 where turn signals must be used: 1. Turn on the left turn signal when starting the vehicle. 2. Turn on the left turn signal when starting on a slope. 3. Activate the right turn signal when approaching the parallel parking spot and stopping within 30 cm of the curb before reversing. 4. Turn on the left turn signal before shifting into reverse gear for parallel parking, as the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left. 5. Shift into drive gear and turn on the left turn signal before exiting the parallel parking spot, and turn it off promptly after exiting. 6. Turn on the left turn signal when entering the right-angle turn area and turn it off promptly after completing the turn. Subject 2 has a total score of 100 points, with evaluation criteria for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed under the following conditions: ① For applicants of large buses, tractors, city buses, medium buses, or large trucks, a score of 90 or above is required. ② For other vehicle types, a score of 80 or above is required. The C1 and C2 license tests include five mandatory items: reversing into a garage, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves). Some regions also include a sixth item: highway toll collection. The A1, A2, A3, B1, and B2 license tests include: pole test, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate passing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

5

3

Share

How to Install a Push-Start System in a Car?

Installing a push-start system involves the following steps: 1. Install the induction device on the door handle; 2. Remove the dashboard and door panel, take out the wiring harness inside, and solder the push-start device wires to the connectors; 3. Set the original car's ignition switch to the ACC position, plug in the prepared wiring harness, and match the keys. Cars equipped with a push-start system offer the following advantages: 1. Automatic Door Unlock: When the owner approaches the vehicle within approximately 3 meters, the door locks will automatically open, disabling the anti-theft system. 2. Automatic Locking: When the owner leaves the vehicle, the door locks will automatically engage, activating the anti-theft system. 3. Keyless Operation: Once inside the vehicle, the owner only needs to press the start button, eliminating the need for a key. However, its drawbacks should not be overlooked. If the position sensor fails or the ignition matching fails, the ignition switch keyhole will be required. Generally, low-grade or poorly executed modifications do not retain the keyhole, necessitating a return to the repair shop for resolution.

12

2

Share

What is the reason why the windows on both sides cannot wipe off rainwater when raised or lowered?

The situation where the windows on both sides cannot wipe off rainwater when raised or lowered is likely due to aging window rubber seals or improper glass installation. Here are several reasons why wipers may not clean effectively: 1. Excessive force from the wiper arm: The solution is to check the wiper arm spring. 2. Insufficient curvature of the wiper: The solution is to replace the wiper with poor curvature and purchase a wiper with better curvature. 3. Bird droppings or other particles on the car's glass causing stains to spread when wiped: The solution is to clean the glass with a cloth before driving and also wipe the wiper rubber strips clean. 4. Cracks in the wiper rubber strips.

17

0

Share

Why Does the Automatic Transmission Make Noise When Releasing the Foot Brake?

Automatic transmission vehicles may produce abnormal noises when releasing the foot brake during startup for the following reasons: 1. Slow Brake Release: This noise primarily occurs when the brake is released too slowly during startup, a common issue among many automatic transmission owners. When the brake pedal is gradually released, the engine already has sufficient power to propel the vehicle forward, but the brake hasn't been fully disengaged. As a result, the moving wheels are held back by the braking system, naturally causing abnormal noises. The solution is to release the brake more quickly next time. 2. Brake Disc and Pad Corrosion Sticking: This usually happens after driving in rainy weather and then leaving the car unused for several days. The brake disc and pad may corrode and stick together, leading to noise upon restarting. Applying butter or specialized lubricant at the connection between the brake pad and caliper at a repair shop can resolve this issue. 3. Metallic Sounds: Many modern brake pads are made of semi-metallic materials containing a large amount of metal fibers, which can sometimes form metal particles. These particles may produce a screeching sound when the brake is applied or released. This condition typically disappears after driving for a while. If the noise persists, it may indicate poor manufacturing quality, and it's advisable to replace the brake pads promptly to avoid damaging the brake disc.

13

3

Share

Where to Find the VIN on the Vehicle License?

The VIN (Vehicle Identification Number) is an abbreviation for Vehicle-Identification-Number. It is a unique code assigned to each vehicle and can be found in a specific column on the vehicle license. Below are detailed explanations about the VIN: 1. Regulations: According to the SAE standard, the VIN consists of 17 characters, hence it is commonly referred to as the 17-digit code. It includes information such as the manufacturer, year, model, body type and code, engine code, and assembly location. Correctly interpreting the VIN is crucial for accurately identifying the vehicle model and ensuring proper diagnosis and maintenance. 2. Detailed Breakdown of the VIN: (1) Positions 1-3 (WMI): Manufacturer, brand, and type. (2) Positions 4-8 (VDS): Vehicle characteristics. (3) Position 9: Check digit. (4) Position 10: Model year. (5) Position 11: Assembly plant. (6) Positions 12-17: Serial number.

15

0

Share

How to reset the maintenance light on a Kia K5?

How to Deal with Diesel Engine Overheating?

How many points are deducted for not using turn signals during parallel parking?

How to Install a Push-Start System in a Car?

What is the reason why the windows on both sides cannot wipe off rainwater when raised or lowered?

Why Does the Automatic Transmission Make Noise When Releasing the Foot Brake?

Where to Find the VIN on the Vehicle License?

What is the difference between 91W and 91V?

What is the Difference Between Coating and Paint Protection Film?

How to Overcome Nervousness in Subject One Test and Eliminate Anxiety?

Is it normal to have bubbles right after car window tinting?