How to reset the maintenance light on a Kia K4?

2 Answers
Deanna
09/07/25 4:53am
First, turn the Kia K4's power to ON mode. Then press the toggle button on the steering wheel to switch to user settings, where you can see the maintenance settings. Finally, press the OK button to enter the maintenance settings, and long-press the OK button to reset the maintenance mileage and time. Below is more information about the maintenance light: 1. The main function of the maintenance light is to record the mileage of some important components. When it lights up, it reminds the owner that it's time for maintenance, and they should go to the nearest authorized service center as soon as possible. The service personnel will use a diagnostic tool to reset the maintenance light, which is the second method for resetting it. 2. In addition to mileage-based maintenance, daily maintenance is also very important. Especially during the rainy season, after the car is exposed to rain, because rainwater is acidic, leaving it unattended for a long time can easily corrode the car's paint surface, making it less shiny than before. In severe cases, it may even fade, so it's important to pay attention to cleaning the car body during the rainy season.
Was this review help?
7
2
Share
DominicMarie
09/19/25 4:14am
I've been driving a Kia K4 for several years and often reset the maintenance light myself. Simply put, it's done through the dashboard buttons. First, turn the key to the ON position (without starting the engine), so the center console and dashboard have power. Then, use the control buttons on the right side of the steering wheel or next to the dashboard, press a few times to navigate to the vehicle settings menu, find an option like maintenance reset, and hold the confirm button for 5-10 seconds until the light goes off. Don't forget to do this after the actual maintenance, otherwise the light will still remind you, wasting the alert function. I suggest checking the user manual first to see which page describes the specific steps, as the button positions might differ between the 2014 and 2018 models—getting it wrong might leave the light on. Regular maintenance can extend the engine's lifespan, so after resetting the light, schedule the next one on time without delay. It's best to keep a small notebook in the car to record maintenance dates for easy tracking.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

How long does it take to repair a faulty car starter?

It depends on the vehicle. For a four-cylinder engine, it usually takes about four to five days to repair. If the starter malfunctions, the following symptoms may occur: 1. No response when starting the vehicle: This indicates the starter is not working, possibly due to power supply issues, internal open circuit, or short circuit in the starter. 2. Dull sound and low RPM during startup: This is caused by an internal short circuit in the starter, where some coils are shorted and cannot generate sufficient rotational magnetic force to provide the required torque for starting. 3. Motor sound is audible but RPM remains zero: This suggests a fault in the starter's solenoid (the smaller cylindrical part on the starter), which is responsible for pushing the starter gear into engagement with the flywheel. In this case, the starter keeps rotating but fails to drive the flywheel to start the vehicle. 4. Loud noise during startup: This is due to damage in the starter's bearings, carbon brushes, or the surface of the starter gear, causing operational issues. 5. Burning smell: A burning odor from the vehicle's chassis during startup indicates an internal short circuit in the starter, causing overheating of the starter wiring harness or coils.
1
4
Share

Where is the air conditioning located in a van and how to start it?

The following are the location and activation method of the air conditioning in a van: 1. Location: The compressor is driven by a belt on the engine, the condenser is in front of the radiator, the evaporator is inside the control panel, and the air outlets are usually located on both the control panel and the top of the cabin. Some evaporators are positioned in the middle section of the cabin roof. 2. Activation method: Press the A/C cooling switch, adjust the temperature switch to the thickest blue position, and set the air outlet switch to the direct opposite position. Below is an introduction to air conditioning maintenance: 1. Comprehensive inspection of the air conditioning: When using the air conditioning for the first time in summer, inspect the air conditioning system first, such as checking the refrigerant and whether the air filter is too dirty through the liquid storage tank, and whether there are any foreign objects in the radiator. 2. Pay attention to the cleaning of the air conditioning: The air filter should be replaced regularly, otherwise the air conditioning will produce a musty smell. In addition, the condenser should also be cleaned periodically, and the radiator should be removed for thorough cleaning.
6
3
Share

What is the fuel consumption of SAIC Maxus V80 per 100 kilometers?

SAIC Maxus V80 consumes 8L per 100 kilometers. As the only wide-body light passenger vehicle in China equipped with a 6AMT automatic transmission, the SAIC Maxus New V80 Elite Edition offers easy driving control, making driving simpler and safer even under the strictest traffic regulations. Introduction to SAIC Maxus V80: 1. The 6AMT automatic transmission used in Maxus V80: Makes gear shifting convenient, allowing new drivers to get started easily and drive more relaxed, significantly improving driving safety. Paired with the Italian VM 2.5T turbocharged engine, it can deliver a maximum power of 136 horsepower and a maximum torque of 330 Nm, with a combined fuel consumption as low as 5.4L per 100 kilometers, effectively balancing strong power and ultra-low fuel consumption. 2. The SAIC Maxus New V80 Elite Edition also achieves comprehensive protection from inside to outside: In terms of active safety, the New V80 Elite is equipped with ESP body stability control system, ABS anti-lock braking system, EBD brake force distribution system, BAS brake assist system, HHC hill start assist system, and other active protection systems, achieving active safety configuration standards comparable to mainstream passenger vehicles.
9
5
Share

Is Volvo's 8-Year Extended Warranty Worth It?

Volvo's 8-year extended warranty is very worthwhile. Here's the relevant information: 1. Meaning of Extended Warranty: As the name suggests, an extended warranty means extending the warranty period. It refers to paying a certain fee to extend the original factory warranty after the new vehicle warranty expires. For example, the general vehicle warranty is 3 years or 100,000 kilometers. By choosing the extended warranty service, the warranty period can be extended to 8 years or 200,000 kilometers. During the extended warranty period, you enjoy the same services as the new vehicle warranty. 2. Coverage: An extended vehicle warranty is not vehicle insurance or vehicle maintenance. The fundamental difference between the three is that vehicle insurance covers repair costs for accidents; an extended vehicle warranty covers repair costs for vehicle malfunctions; and vehicle maintenance refers to the regular inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as preventive work to eliminate hidden dangers and extend the service life. Simply put, if a car accident occurs during driving and causes repair costs, it is covered by the insurance company. However, any mechanical or electrical component failures that occur during normal vehicle use without a traffic accident fall under the extended warranty coverage.
7
5
Share

What is the reason for the Skoda Octavia transmission warning?

Skoda Octavia transmission warning reasons: 1. Occasional or persistent failure of automatic transmission electronic components, which can be resolved by replacing the electronic components; 2. Mechanical failure in automatic transmission models, such as engine idling, transmission slipping, clutch burnout, etc. The owner needs to go to a repair shop for inspection and treatment; 3. Excessive transmission oil temperature, such as excessive transmission oil filling, internal or external blockage of the transmission radiator, etc., which can be resolved by replacing the transmission oil. The Skoda Octavia adopts new engine technologies such as FSI gasoline direct injection, turbocharging, EGas electronic throttle, and adjustable intake vortex. It is equipped with designs such as dual balance shafts, dual-mass flywheels, rocker-type tappets, and camshaft-driven silent chains, which greatly reduce vibration and noise. The Tiptronic 6-speed automatic manual transmission combines the advantages of automatic and manual transmissions.
4
5
Share

What are the key points for the S-curve in Category 2 of the Large Passenger Vehicle A1 license test?

For the S-curve in Category 2 of the Large Passenger Vehicle A1 license test, there are key points to observe before entering and after entering the curve. Before entering: Before entering the S-curve, position the vehicle slightly towards the outer side of the road. When entering, look straight ahead and align the vehicle with the center of the road (in practice, it's better for the vehicle body to enter slightly angled along the midline of the S-curve). Once the vehicle enters the S-curve, look down from the left front corner of the vehicle. When the left front corner of the vehicle aligns with the right edge line of the S-curve, turn the steering wheel one full turn to the left, then slowly continue turning left while watching the left front corner of the vehicle. After entering the curve: Enter the S-curve in 1st or 2nd gear, keeping the vehicle about 0.5m away from the right side of the road. Maintain the left wheels of the vehicle about 0.5m from the edge line of the road, making moderate directional adjustments. When driving into the curve, reduce speed in advance and keep to the right.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.