How to Reset the Maintenance Light on a Highlander?

What are the penalty standards for C1 reverse parking?

C1 reverse parking penalty standards are: exceeding 210 seconds for project completion time, not following the prescribed route or sequence, failing to drive the front wheels over the control line before reversing, and not fully entering the parking space all result in a 100-point deduction. Stopping for more than 2 seconds during the process incurs a 5-point deduction per occurrence. Different items in Subject 2 have different deduction points. The specific analysis is as follows: 1. Common deductions: Not wearing a seatbelt, not closing the car door properly, and not having the gear in neutral when starting the engine all result in a 100-point deduction. Not using turn signals, using turn signals for less than three seconds, forgetting to turn off turn signals, or incorrect use of turn signals, and stalling the engine all incur a 10-point deduction each. 2. Parallel parking: After the vehicle stops in the parking space, if the body crosses the line or the project completion time exceeds 90 seconds, a 100-point deduction is applied. Not using or incorrectly using turn signals when exiting the parking space also results in a 100-point deduction. During the process, if the body touches the parking space line or the wheels touch the lane boundary line, a 10-point deduction is applied per occurrence. Stopping for more than 2 seconds during the process incurs a 5-point deduction per occurrence. 3. Curve driving: If the wheels press the edge line or the vehicle stops for more than 2 seconds during the process, a 100-point deduction is applied.

3

5

Share

What Happens When a Car's Evaporator Core Gets Clogged?

When the air conditioner's evaporator or condenser is externally clogged with debris (such as catkins or dust), the cooling efficiency will significantly decrease. If a layer of dirt accumulates on the condenser, its heat dissipation performance deteriorates, severely affecting the refrigeration process. Similarly, if the evaporator surface becomes fouled, the cooling capacity cannot be effectively utilized, causing the refrigeration system to malfunction. This issue can be immediately resolved by cleaning the accumulated dirt. Common troubleshooting methods for car air conditioning issues are as follows: 1. The AC system does not operate, and there is no pressure in the system: This is a common scenario caused by refrigerant leakage. In most cases, professional repair is required to locate the leak, replace or repair the affected components, and then recharge the refrigerant. 2. The compressor's low pressure remains unchanged, and the high pressure remains unchanged: The AC fails to cool, with the discharge pipe surface temperature being high and no temperature difference at the expansion valve's inlet and outlet pipes. This is typically caused by a damaged expansion valve temperature sensor and refrigerant leakage. The solution is to replace the expansion valve and recharge the refrigerant. 3. The system operates normally, but the cooling effect is poor, and the air outlet airflow is insufficient: If the air conditioning ducts have not been cleaned for a long time, this is likely due to excessive dirt buildup. The solution involves removing the evaporator core and filter for thorough cleaning.

5

Share

How long after the expiration date can a B2 driver's license not be renewed?

If the driver's license has been expired for less than one year, it can be renewed normally; if it has been expired for more than one year but less than three years, the license will be canceled, but it can be renewed by passing the subject one exam; if it has been expired for more than three years, the license will be invalid and cannot be renewed. Renewal materials: Bring two copies of ID card, two 1-inch recent color photos without hats, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free medical examination is also available at the vehicle management office). Renewal process: The motor vehicle driver shall apply for renewal to the vehicle management office where the driver's license was issued with the required materials. The vehicle management office will process the renewal within one working day after passing the review. Regulations on the expiration and invalidation of the driver's license: If the driver's license has been expired for less than one year, it can be renewed normally; if it has been expired for more than one year but less than three years, the license will be canceled, but it can be renewed by passing the subject one exam; if it has been expired for more than three years, the license will be invalid and cannot be renewed.

16

0

Share

Will I get points deducted for driving at 66 in a 60 km/h speed limit zone?

Driving at 66 km/h in a 60 km/h speed limit zone constitutes a 10% overspeed violation. This type of offense does not incur fines or points deduction, but it is still considered a traffic violation and will be processed as an overspeed case. Exceeding the speed limit by 33% will result in 6 points deducted and a fine of 200 yuan. 1. Overspeed calculation formula: Overspeed percentage = [(Actual speed - Speed limit) ÷ Speed limit] × 100%. 2. Overspeed penalties: (1) For exceeding the speed limit by less than 10%, only a warning will be issued without fines or points deduction; (2) For exceeding the speed limit by 10% to less than 20%, a fine of 200 yuan and 3 points will be imposed; (3) For exceeding the speed limit by 20% to less than 30%, a fine of 200 yuan and 6 points will be imposed; (4) For exceeding the speed limit by 30% to less than 50%, a fine of 200 yuan and 6 points will be imposed; (5) For exceeding the speed limit by 50% to less than 70%, a fine of 1000 yuan and 12 points will be imposed, and the driver's license may be revoked.

19

1

Share

How to Match C1 Gear with Speed?

c1 gear should match the speed as follows: 1. 1st gear: Used for normal starting or climbing very steep slopes, with a speed generally around 10 km/h; 2. 2nd gear: A transitional gear for acceleration after starting or for low-speed driving, with a speed generally around 20 km/h; 3. 3rd gear: Used at speeds between 20-40 km/h, commonly used for urban driving; 4. 4th gear: Used at speeds between 40-60 km/h; 5. 5th gear: Can be used at speeds of 60 km/h or above. Gear introduction: 1. 1st gear: The starting gear, used to start the car. Its gear ratio is similar to that of the reverse gear, so it is not suitable for prolonged high-speed operation. Generally, you can shift to 2nd gear once the car gains momentum. 2. 2nd gear: The passing gear, mainly used for navigating complex road conditions and handling difficult situations, such as sharp-angle (right-angle) turns without special obstacles, crowded urban areas, steep slopes, and bumpy roads. 3. 3rd gear: The transitional gear, mainly used for low-speed driving in urban areas. Depending on the situation, you can easily shift up to 4th gear for acceleration or down to 2nd gear for deceleration.

14

0

Share

What is the Difference Between High and Low Gasoline Octane Ratings?

Gasoline octane ratings are determined by the octane number of the gasoline. The higher the octane number, the stronger the anti-knock capability of the gasoline, and the higher the octane rating. The anti-knock performance indicator of gasoline is called the octane number, which is the gasoline octane rating. Generally, engines with high compression ratios require gasoline with higher octane ratings, while engines with low compression ratios use gasoline with lower octane ratings to ensure normal vehicle operation. Below is a related introduction: 1. Principle: Generally, engine operation consists of a repetitive cycle of "intake-compression-combustion-exhaust-intake" in the cylinders. The compression ratio is the ratio of the cylinder volume when the piston is at the farthest and nearest points in its stroke. The best way to reduce fuel consumption costs is to increase the engine's compression ratio. Increasing the compression ratio can alter the piston stroke, compressing the air-fuel mixture more intensely, which results in a stronger combustion reaction and more complete combustion. However, the compression ratio of a car is not easily changed and is matched with an indicator, namely the gasoline's anti-knock performance indicator, known as the octane number, which is the gasoline octane rating. 2. Composition of gasoline: Standard gasoline consists of isooctane and n-heptane. Isooctane has excellent anti-knock properties with an octane number of 100, while n-heptane has poor anti-knock properties and is prone to knocking in gasoline engines, with an octane number of 0. Generally, if a gasoline's octane rating is 0, it means the gasoline contains 90% isooctane and 10% n-heptane.

13

5

Share

How to Reset the Maintenance Light on a Highlander?

What are the penalty standards for C1 reverse parking?

What Happens When a Car's Evaporator Core Gets Clogged?

How long after the expiration date can a B2 driver's license not be renewed?

Will I get points deducted for driving at 66 in a 60 km/h speed limit zone?

How to Match C1 Gear with Speed?

What is the Difference Between High and Low Gasoline Octane Ratings?

What is the working principle and basic composition of a truck-mounted drilling rig?

Has the Baojun 510 Been Discontinued?

Why is the air conditioning in a new car not cooling?

Where is the rearview mirror heating button on the Wildlander?