How to reset the maintenance light on a Haval H6?

[SanJude]

To reset the maintenance light on a Haval H6: 1. Turn off the ignition and press and hold the button at the lower right corner of the instrument panel. 2. Turn the ignition to the ON position until all instrument panel lights illuminate, then release the button once the small wrench icon on the instrument panel stops flashing. 3. Press the button at the lower left corner of the instrument panel until the small wrench icon disappears. 4. Use the vehicle's computer to reset the light. 5. Visit a 4S dealership to have the light reset using a diagnostic tool. The "SERVICE" indicator on the instrument panel is a maintenance cycle reminder. When the ignition is in the ON position, the "SERVICE" indicator will flash, and it will disappear after starting the engine, indicating that the vehicle requires maintenance. After maintenance, the maintenance light should be reset.

[LaJeremiah]

I've been driving for over ten years and usually do my own car maintenance. Resetting the maintenance light on a Haval H6 is actually not difficult and quite straightforward to operate. First, don't start the engine, just turn the key to the ON position. Then, look at the dashboard and locate the reset button next to the small wrench icon—on some models, it might be the MODE or INFO button on the steering wheel. Hold it down for a few seconds until the screen flashes, and you're done. If you don't have the manual, try turning the ignition switch on and off a few times or holding down a combination of buttons, but avoid random pressing to prevent errors. I recommend developing a habit of regularly checking things like engine oil and brake pads. If the maintenance light keeps coming on, it might be time to replace something. In any case, if you can't manage it yourself, take it to a 4S shop for a check—safe driving is very important.

[McQuinn]

When it comes to resetting the maintenance light, I've dealt with quite a few cars. For the Haval H6, the general steps are: with the engine off, turn the key to the second position (ON), but don't start the engine; then press and hold the reset button or a similar function button on the dashboard for a few seconds; the light should go off. The button location varies depending on the model year—I've seen some on the left side of the steering wheel. If you make a mistake, it's not a big deal; the worst that can happen is the light won't turn off, but don't force it to avoid damaging the circuitry. Actually, the maintenance light is a good reminder for owners to perform timely maintenance and extend the vehicle's lifespan. I make it a habit to record the maintenance date after each reset, so I won't forget basics like oil or filter changes next time.

[VanIsabela]

To reset the maintenance light on a Haval H6, follow these steps. First, open the door and sit in the driver's seat without starting the engine, just turn the key to the ON position. Then, locate a button labeled RESET or INFO near the steering wheel or instrument panel. Press and hold it for 3-5 seconds, and the light will turn off automatically. This is essentially an intelligent reminder system that periodically lights up to indicate it's time for a check-up at the 4S shop. I've done it myself once, and it's quite convenient. However, if you can't find the button, referring to the user manual will help. Also, pay attention to fuel consumption changes while driving. Acting before the light comes on can save you a lot on maintenance costs.