How to reset the maintenance light on a Haval H6?

[DiAddyson]

Haval H6 maintenance light reset method is: 1. Turn off the ignition switch; 2. Press and hold the trip meter reset button on the combination instrument panel; 3. Turn on the ignition switch; 4. The odometer display will begin counting down, when the display shows 0000.0, release the button. The Haval H6 has body dimensions of: length 4653mm, width 1886mm, height 1730mm, with a wheelbase of 2738mm. The Haval H6 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 155kW and a maximum torque of 325Nm, paired with a 7-speed dual-clutch transmission.

[LaCalvin]

I just bought a Haval H6 less than half a year ago and noticed that annoying maintenance light came on. I figured out how to reset it myself. Simply put, turn the key to the ON position without starting the engine, then press and hold the TRIP reset button next to the steering wheel for about 5 seconds until the indicator light goes off. If you're handy, doing it yourself is quite convenient—I learned it by checking the manual and videos online. The key is to ensure the battery has enough charge, otherwise it might not work. Resetting the maintenance light actually reminds you to change the oil or get a check-up. I suggest not just resetting it but going to the shop for timely maintenance to extend your car's lifespan. As an average car owner, regular maintenance really saves hassle—otherwise, small issues can turn into major repairs, which is troublesome.

[MacBrielle]

The Haval H6 is quite nice to drive, but when the maintenance light stays on, you just need to reset it. The method is very simple: turn off the engine, switch the key to the ACC position, don't press the accelerator, and hold the RESET button on the dashboard for about 8 seconds, then the light will go off. I've seen many car owners do this at repair shops—the key is to be patient and not release the button too soon. If you try a few times without success, it might be due to poor button contact or a minor system glitch; just visit a 4S shop for free assistance. After resetting, remember to follow the manufacturer's recommendation for maintenance every 5,000 kilometers, checking fluids and filters. Learning this trick can save you a bit of money each year.

[DiPaislee]

Resetting the maintenance light on a Haval H6 by yourself is not difficult. Turn the ignition key to the ON position, hold down the TRIP button without releasing it, and after a few seconds, the indicator light will turn off. If the button doesn't respond, check whether the fuse or battery is functioning properly. The maintenance light serves as a reminder for you to get your car checked, so don't overlook routine maintenance.

[SanVivienne]

Resetting the maintenance light on the Haval H6 is quite easy. Turn the ignition key to the ON position without starting the engine, then press and hold the TRIP reset button for 5-10 seconds. Don't worry about messing it up, just try a few times if needed. If the light comes back on after being reset, there might be an actual issue with the vehicle that requires inspection. It's best to do this along with your maintenance schedule to ensure engine health. Remember to reset it promptly to avoid the reminder sound disturbing your drive.