How to Reset the Maintenance Light on a Haojue Motorcycle?

Why is there a sound when stepping on the brake?

Excessive wear or foreign objects entering the brake pads can cause such abnormal braking noises, which are common in new cars or after replacing brake pads. Below is more detailed information about these three points: 1. Severe wear of brake pads: This usually occurs when the brake pads reach the warning line or are completely worn out. The noise is mostly a sharp metal friction sound, accompanied by reduced braking effectiveness. 2. New cars with harder brake pad materials are more prone to such noises, while softer brake pad materials are less likely to produce such abnormal sounds. Softer materials wear out faster, resulting in a shorter replacement cycle compared to harder materials. 3. While driving, tiny sand particles can get between the brake pads and discs, causing abnormal noises due to friction.

15

2

Share

What to Do When the Car Shakes After Starting in Water?

The causes and solutions for car shaking after starting in water are as follows: 1. Air filter not cleaned: The air filter is designed to protect the engine and reduce wear. It is usually replaced around 10,000 kilometers. If not replaced in time, insufficient air intake can cause low idle speed, leading to engine shaking. Simply replacing the filter can solve the problem. 2. High-voltage line open circuit: A high-voltage line open circuit refers to the breakage of the wire core in the high-voltage line, which can affect ignition and cause engine shaking. Use a multimeter to measure the resistance and replace the one with significantly higher resistance. Spark plugs with over 30,000 to 40,000 kilometers of use show significantly reduced ignition efficiency and can affect ignition. The most common solution is to replace all spark plugs. 3. Clogged fuel injectors: Impurities in gasoline can clog the injector nozzles, causing inconsistent fuel injection among injectors and uneven cylinder operation, leading to engine shaking. The solution is to remove and clean them. 4. Carbon deposits and oil sludge blockage: Over time, carbon deposits and oil sludge can clog the throttle valve, idle valve, and intake ports, causing poor air intake and unstable idle speed, resulting in shaking. Inspect and clean these parts with a cleaning agent without disassembly.

7

0

Share

What are the symptoms of valve leakage?

Automotive valve leakage manifests as weak vehicle performance, difficulty in starting/accelerating, decreased engine power leading to increased fuel consumption, and over time, noticeable carbon buildup in the engine system. The following are the manifestations of valve leakage: 1. Reduced sealing between the valve and valve seat due to valve erosion. 2. Poor grinding of the valve sealing ring during maintenance. 3. Valve clearance adjusted too small, resulting in incomplete valve closure. 4. Foreign objects causing poor sealing when the valve is installed into the valve seat. 5. Carbon buildup on the conical surface of the valve and valve seat. 6. Pitting, scratches, stains, burns, or dents on the valve working surface. 7. Excessive runout of the valve and valve stem. 8. Excessive coaxiality deviation between the valve guide hole and seat hole.

10

4

Share

What to Do When the Key is Locked Inside the Chevrolet Cavalier?

Here are the solutions for when the key is locked inside the Chevrolet Cruze: 1. You can go home and get the spare key to unlock the car door. 2. Enter through the trunk to retrieve the key or use a stick to fish it out. 3. You can call a locksmith to open the car door. Below is more information about opening the car door without a key: 1. Generally, cars nowadays come with two keys—one for regular use and the other as a spare. If the regular key is lost, the spare key can come in handy. You can either go back home to get it or ask a family member to bring it to you. Always remember not to leave the spare key inside the car. 2. Retrieve the key through the trunk. Since modern car keys are not the old-fashioned type, as long as the key is within the detectable range, the trunk can be opened. After opening the trunk, there is usually a "small door" connecting the trunk and the interior of the car. You can crawl through to get the key or use a stick to pull it towards you.

19

0

Share

How to Add Coolant to a BMW?

Here is the method for adding coolant to a BMW: 1. Open the engine hood and locate the coolant reservoir on the left side of the engine compartment; 2. Open the reservoir filler port to add coolant. Below is more information about BMW cars: 1. BMW models include: BMW 5 Series, BMW 3 Series, BMW X1, BMW X5, BMW X3, etc. 2. Taking the BMW 5 Series as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5106mm, width 1868mm, height 1500mm, and a wheelbase of 3105mm. 3. The BMW 5 Series is equipped with a 2.0T turbocharged engine, with a maximum power of 135kW and a maximum power speed of 5000 to 6500 rpm, paired with an 8-speed automatic transmission.

16

4

Share

Differences Between Full-Size and Non-Full-Size Tires

The differences between full-size and non-full-size tires are as follows: Size difference: A full-size spare tire refers to a spare tire with the same specifications as the four original tires on the car, usually equipped with the same rim as the original wheel; a non-full-size spare tire is narrower in tread width or has a smaller rim size, typically using a steel rim. Speed difference: Non-full-size spare tires have speed restrictions (maximum speed not exceeding 80 km/h) and can only temporarily replace the original tire. Full-size spare tires have no such restrictions. Weight difference: Full-size spare tires, being identical in specifications to the original tires, are much heavier than non-full-size spare tires. In daily use, the following points should be noted for tires: Regularly check the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallower. If the tread is worn flat, it loses its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks can be potential hazards for tire blowouts at high speeds. Additionally, promptly remove pebbles stuck in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool down, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent and hard braking to prevent accelerated tread wear from dragging on the ground.

9

1

Share

How to Reset the Maintenance Light on a Haojue Motorcycle?

Why is there a sound when stepping on the brake?

What to Do When the Car Shakes After Starting in Water?

What are the symptoms of valve leakage?

What to Do When the Key is Locked Inside the Chevrolet Cavalier?

How to Add Coolant to a BMW?

Differences Between Full-Size and Non-Full-Size Tires

How to Activate ETC After Removal?

How to Unlock a Steering Wheel Lock?

What are the symptoms of insufficient clutch fluid?

What is the DS car?