How to Reset the Maintenance Light on a Great Wall Haval H2?

1 Answers
StRuth
07/30/25 9:31am
The method to reset the maintenance light on a Great Wall Haval H2 is as follows: 1. Turn off the ignition switch; 2. Press and hold the trip meter reset button on the combination meter; 3. Turn on the ignition switch; 4. The odometer display will begin a countdown, and when it shows 0000.0, release the button. Taking the Haval H2 2018 model as an example, its body dimensions are: length 4365mm, width 1814mm, height 1710mm, with a wheelbase of 2560mm. The Haval H2 2018 model is equipped with a 1.5T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 210Nm, paired with a 6-speed manual transmission.
Was this review help?
2
3
Share
More Forum Discussions

What methods can be used to recover from fatigue during long-distance driving?

Long-distance driving fatigue can be alleviated by stopping the vehicle, getting out of the driver's seat to stretch limbs, and breathing fresh air. Below is an introduction to fatigue driving knowledge: 1. Concept: Fatigue driving, which is highly likely to cause traffic accidents, refers to the phenomenon where drivers experience physiological and psychological dysfunction after prolonged continuous driving, resulting in objectively observable declines in driving skills. Poor or insufficient sleep quality for drivers, coupled with extended periods of vehicle operation, can easily lead to endogenous oxygen deficiency and fatigue. 2. Impact: Driving fatigue affects various aspects of a driver's attention, sensation, perception, thinking, judgment, willpower, decision-making, and movement. Continuing to drive while fatigued may result in drowsiness, limb weakness, lack of concentration, reduced judgment ability, and even mental confusion or momentary memory loss. This can lead to delayed or premature actions, operational pauses, or inappropriate correction times – all of which constitute unsafe factors that significantly increase the risk of road traffic accidents.
13
3
Share

Why Can't the Car Start When the Anti-Theft Lock is Engaged?

There are several reasons why a car might not start when the anti-theft lock is engaged: 1. The car has an engine immobilizer system: The vehicle can only be started if the chip inside the key matches the code in the anti-theft system. 2. The spare key does not contain a chip: The spare key, which lacks a chip, cannot start the car and is only meant for unlocking the doors when the primary key is lost. 3. The car's ignition keys have been reprogrammed: When adding or reprogramming keys, all keys must be reprogrammed. If any key is not reprogrammed, it will automatically become invalid.
1
2
Share

What brand of car is DSG?

DSG is not a car, but Volkswagen's dual-clutch transmission. Here is an introduction to DSG: 1. Concept: The literal Chinese meaning of DSG is Direct Shift Gearbox. DSG is different from ordinary semi-automatic transmission systems, as it is based on a manual transmission rather than an automatic transmission, making it a member of mechanical automatic transmissions. 2. Nature: DSG can shift gears manually or automatically. It is easier to control than traditional automatic transmissions and can transmit more power, yet it responds faster than manual transmissions. DSG evolved from the Sequential Manual Transmission (SMT), which is essentially a fully automatic, electronically controlled clutch manual transmission.
8
4
Share

What are the yellow and red dots on tires?

The hollow yellow dot is the light point mark of the tire, indicating the lightest position on the tire; the solid red dot represents the point of maximum longitudinal rigidity of the tire. Below is an introduction to the yellow and red dots on tires: 1. Introduction to the yellow dot: The hollow yellow dot is the light point mark of the tire, indicating that this position is the lightest on the tire. A car wheel consists of three parts: the tire, the rim, and the valve. The valve is installed on the rim and can correspond to the heaviest point on the rim. When assembling the tire, aligning the position marked with a yellow dot on the tire with the heaviest point on the rim can achieve better dynamic balance. 2. Introduction to the red dot: The solid red dot represents the point of maximum longitudinal rigidity of the tire, simply put, the position marked with a red dot is the point with the most vibration on the tire. When the vehicle rotates once on the surface, every position inside the tire will experience different degrees of compression force, which indirectly affects driving comfort.
3
2
Share

What is the fuel consumption of Jaguar XJ?

Jaguar XJ's fuel consumption is 13.1 liters per 100 kilometers, which means 0.131 liters per kilometer. The relevant information about Jaguar XJ is as follows: 1. Exterior: Panoramic, the heat-reflective sunroof spans horizontally across the entire roof, extending to the rear seating area. It filters UV rays while allowing natural light to pour in, with dark-tinted glass ensuring privacy and creating a ventilated, spacious interior. The elongated, low-slung, and breathtakingly stunning appearance, along with the naturally flowing roofline formed by the seamlessly integrated rear window. 2. Interior: Spacious seats, the designers adopted a more neutral styling. The beige interior paired with light-colored walnut wood panels reflects the elegance and luxury of British cars, while there is also a more sporty black interior option. The two main instrument clusters include a small display screen showing crucial driving information, with additional details displayed on the larger screen on the center console. The steering wheel is adjustable for both height and reach, and even the pedal set position can be adjusted.
13
2
Share

How to Clean Spark Plug Carbon Deposits?

Soak the removed spark plug in carburetor cleaner, then use a copper brush to clean the residual carbon deposits on the surface. Below are specific details on how to judge the condition of a spark plug: 1. Tan or gray: If the insulator is tan, brown, or grayish-white, and the spark plug electrodes show minimal wear, such a spark plug can still be used for a longer period. 2. Black: If covered with black carbon deposits, which may even cause engine stalling in severe cases, these black carbon deposits indicate spark plug carbon buildup. If the carbon buildup is severe, it is recommended that the owner consider replacing the spark plug with a new one. 3. Black, moist, and shiny oil stains: If black, moist, and shiny oil stains appear, it indicates oil contamination on the spark plug surface. The owner can handle this issue themselves. Excessive oil contamination can make the car difficult to start, and the cause of the oil contamination should also be carefully investigated. 4. Scorched white: If the insulator skirt appears scorched white and the electrodes are burnt or damaged, the owner is advised to replace the spark plug immediately and not continue using it, as a damaged spark plug can easily lead to other issues.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.