How to Reset the Maintenance Light on a Golf?

Are Yellow Label Vehicles Allowed in Urban Areas?

Yellow label vehicles are not allowed in urban areas. Yellow label vehicles typically have high levels of pollutant emissions, high concentrations, and poor emission stability. The emissions from one yellow label vehicle are equivalent to those of 5 National I standard vehicles, 7 National II standard vehicles, 14 National III standard vehicles, or more than 20 National IV standard gasoline vehicles. The public security traffic management departments and environmental protection departments strengthen collaboration to enhance road traffic law enforcement, such as cracking down on yellow label vehicles violating restricted or prohibited zones and old vehicles that meet scrapping standards but are still driven on roads. Public security traffic management departments, in accordance with government-announced restricted and prohibited zones for yellow label vehicles, set up and improve traffic signs, utilize technological measures and on-road law enforcement, and adopt methods like concentrated rectification and routine supervision to intensify efforts in penalizing yellow label vehicles that violate restricted or prohibited zones. Vehicles that meet compulsory scrapping standards, including yellow label vehicles and old vehicles, are dealt with according to the law. Environmental protection departments promptly update the relevant information of in-use yellow label vehicles and provide it to public security traffic management departments to facilitate road traffic law enforcement.

4

1

Share

What is the battery model of the BAIC Huansu S3?

The battery model of the BAIC Huansu S3 is 58500, 12V48Ah550CCA. Battery maintenance methods for the Huansu S3: Avoid parking the car in open-air parking lots for extended periods. If long-term parking is necessary, remove the battery to prevent freezing damage. In winter, car engines are harder to start. Each attempt should not exceed 5 seconds, with intervals of at least 15 seconds between attempts. If the car fails to start after multiple attempts, check other aspects such as the circuit, ignition coil, or fuel system. Avoid continuous attempts, as this can lead to battery damage due to excessive discharge. Regularly charge the car battery. A battery left unused will gradually self-discharge and eventually become unusable. Therefore, start the car periodically to recharge the battery. Clean the battery terminals regularly and apply specialized grease to protect the wiring harness. Frequently inspect the battery components and connecting circuits. Do not use car electronics after turning off the engine. Using the battery alone when the engine is not generating power can cause damage.

14

5

Share

How to Open the Hood of a Magotan?

Here are the steps to open the hood of a Magotan: 1. Locate the hood release lever under the left side of the steering wheel inside the car, pull it, and you will hear a click as the hood pops up slightly. 2. Reach under the front center of the hood to find a small latch, pull it, and the hood will open fully. The functions of the hood include: 1. Airflow guidance. For objects moving at high speeds through the air, the air resistance and turbulence generated around the object can directly affect its trajectory and speed. The hood's shape helps adjust the airflow direction relative to the car's movement and reduces the impact of air resistance. By guiding the airflow, air resistance can be converted into beneficial forces that enhance the front wheels' grip on the road, improving driving stability. The streamlined design of the hood is based on this principle. 2. Protection for the engine and surrounding components. Under the hood are critical parts of the car, including the engine, electrical circuits, fuel lines, braking system, and transmission system. These are vital to the vehicle's operation. By enhancing the hood's strength and structure, it effectively guards against adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle functions properly. 3. Aesthetics. The vehicle's exterior design is a direct reflection of its value. As a key component of the overall appearance, the hood plays a crucial role in enhancing visual appeal and embodying the concept of the car as a whole.

14

0

Share

How to Drain the Coolant in a Peugeot 408?

The method to drain the coolant is as follows: There is a drain screw at the bottom of the car's radiator. Simply open it to drain the coolant, which is a very simple operation. Precautions for coolant: 1. Do not add water to the coolant. When the radiator is low on coolant, adding tap water or 'purified water' has two hazards: first, it lowers the freezing point of the coolant, which can freeze and damage the engine in severe cold weather; second, it can easily cause scaling, rust, and blockage in the cooling system. 2. Be cautious about whether the replacement coolant is counterfeit. Coolant usually has color, and the darker the color, the stronger the antifreeze capability. Some unscrupulous shops add pigments to inferior coolant to make it appear more concentrated. However, when added to the radiator, due to insufficient antifreeze capability, it can cause the cooling system's circulation and thermostat to freeze. Such inferior coolant must be completely drained from the radiator before replacing it with high-quality coolant. 3. Do not attempt to mix your own coolant. Trying to save costs by mixing coolant without specialized measuring cups, thermometers, hydrometers, and other tools can lead to problems. If the concentration (specific gravity) is too low, its antifreeze capability will be insufficient, easily freezing and damaging the radiator and engine. If the concentration (specific gravity) is too high, it will reduce the radiator's cooling efficiency, causing the engine to overheat.

1

Share

Does the Teramont belong to SAIC Volkswagen or FAW Volkswagen?

The Teramont is an SUV model produced by SAIC Volkswagen, alongside other SUV models such as the Tiguan and Tiguan L. SAIC Volkswagen and FAW Volkswagen are two independent companies, each producing entirely different vehicle models. Below are their respective production models: SAIC Volkswagen: Hatchbacks include the POLO series, Gran Lavida series, and Santana hatchback series; Sedans include the Santana, Lavida, Lamando, Passat, and Phideon; In the SUV and station wagon categories, there are the Teramont, Tiguan, and Touran L. FAW Volkswagen: Hatchbacks include the Golf and POLO; Sedans include the Bora and Lavida, Sagitar and Lamando, Magotan, CC, and Passat; Station wagons include the Golf Sportsvan; SUVs include the T-Roc. SAIC Volkswagen is a Sino-German joint venture, which places greater emphasis on market demands, makes significant modifications to imported vehicles, and has stronger innovation capabilities, making its products more aligned with the needs of the Chinese market. FAW Volkswagen, being a state-owned enterprise, tends to respect the original vehicle designs more, with fewer modifications and less innovation compared to SAIC Volkswagen, resulting in less favorable market reception than SAIC Volkswagen. Overall, FAW Volkswagen's vehicles are more faithful to the original designs, while SAIC Volkswagen focuses more on innovation. Therefore, both companies have their own characteristics, and there is no question of which is better.

8

4

Share

How to Reset the Maintenance Light on a Golf?

Press and hold the 0.0 reset button under the tachometer, then turn on the ignition. When the SERVICE indicator appears on the dashboard, release the reset button. Next, pull out the minute button and turn it to the right to display the current maintenance information on the screen. Then, turn off the ignition and switch it back to the ON position. The SERVICE indicator will disappear, indicating the reset operation is complete. Below is some relevant information about the maintenance light: 1. Function of the maintenance light: The maintenance light is a reminder function set by the manufacturer to notify the owner to perform maintenance at certain mileage or time intervals. It appears as a dashboard or screen message or indicator light to remind the owner to schedule maintenance. Resetting the maintenance light means clearing the reminder information after maintenance is completed, essentially resetting the message. 2. Purpose of the maintenance light: It reminds the owner to perform maintenance as soon as possible. The owner should promptly visit a 4S shop for maintenance. After maintenance, the 4S shop will use a diagnostic tool to reset the maintenance light. The quickest and most accurate method to clear the maintenance reminder light is by using a diagnostic tool. Since most owners do not have access to such equipment, it is recommended to have the reminder light cleared at a 4S shop after maintenance or visit an external 4S shop for the reset.

8

1

Share

How to Reset the Maintenance Light on a Golf?

Are Yellow Label Vehicles Allowed in Urban Areas?

What is the battery model of the BAIC Huansu S3?

How to Open the Hood of a Magotan?

How to Drain the Coolant in a Peugeot 408?

Does the Teramont belong to SAIC Volkswagen or FAW Volkswagen?

How to Reset the Maintenance Light on a Golf?

How Many Cylinders Does the Old Buick Excelle Have?

How many liters of engine oil should be added to the Volkswagen Touareg V6?

What is a Yellow Label Vehicle?

How to Adjust the Dashboard Time on Volkswagen Lavida?