How to Reset the Maintenance Light on a Geely Boyue?
3 Answers
To reset the maintenance light on a Geely Boyue, there are two methods depending on the instrument cluster configuration: Method 1: 1. Start the vehicle; 2. Press the "SET" button to enter the instrument settings interface; 3. Locate the "Maintenance Reset" option in the settings; 4. Click to confirm the reset. Method 2: 1. Start the vehicle, and after the dashboard lights up, press the TRIP button on the left side of the control lever to activate the instrument buttons; 2. Use the volume keys on the right side of the steering wheel to switch to the settings system; 3. Press the "MODE" button to enter the settings system; 4. Use the "Left/Right Cycle" buttons on the steering wheel to find the maintenance mileage option; 5. Press the "MODE" button to enter the maintenance mileage system; 6. At this point, there will be two options on the interface: "Return" and "Reset". Use the "Left/Right Cycle" keys to select the "Mileage Reset" option and press the "MODE" button to confirm; 7. The system will then reset the maintenance mileage.
Last time I reset the maintenance light on my Boyue by myself, and it turned out to be quite simple. First, you need to turn off the engine completely, then press and hold the small trip reset button on the dashboard—the one labeled 'TRIP.' Next, turn the key to the ignition-on position without starting the engine, and keep holding the button for about ten seconds. At this point, the dashboard will display a countdown from 10 to 0. Once the countdown ends, release the button, and the maintenance light will go off! Just a reminder: after resetting, the system will start calculating the maintenance cycle anew, so don’t forget the actual service date. If the button doesn’t respond, it might be an older model requiring multiple attempts, or there could be an issue with the button’s contact. Also, it’s a good idea to check the brake pads and tire pressure during seasonal changes for peace of mind while driving.
My Boyue just passed its third maintenance, and here's how I reset the maintenance light: First, turn off the engine, then press and hold the TRIP button near the steering wheel without releasing it. Next, turn the key to the ON position to power on the vehicle. At this point, a countdown prompt will appear in the center of the dashboard. Continue holding the button until the countdown reaches zero before letting go, and the maintenance reminder will be successfully reset. Although the operation is simple, remember that the maintenance light is just a reminder tool—resetting it doesn’t mean the actual maintenance is complete. The reset button location may vary for different model years, and newer models might integrate the function into the touchscreen. After each reset, I make a habit of noting down the current mileage to keep track of the next maintenance interval. Of course, regular oil and filter changes are the key—don’t let the engine suffer.
