How to Reset the Maintenance Light on a Geely Binyue?

Why is the Weilitong Tire Pressure Monitoring Not Displaying?

Tire sensor issues, replacement needed. Under normal circumstances, it's unlikely for all four tires to have abnormal pressure simultaneously. This may indicate a problem with the tire pressure system or the tire pressure sensors. Tire pressure monitoring is not a real-time function. When a tire abnormality occurs, the dashboard will automatically display information. The display does not show specific values, only indicating which tire has a problem. The working principle of tire pressure monitoring is: Using pressure sensors installed inside the tires to measure tire pressure, wireless transmitters send pressure information from inside the tire to a central receiver module. Methods to eliminate tire pressure warnings: There is a tire monitoring indicator button on the central console. After the system issues a low tire pressure warning, the vehicle must remain stationary for about one minute. Do not move the car or turn off and restart the ignition until pressing the button to recalibrate the tire monitoring indicator. Find the tire pressure reset option in the settings on the central display. If none of the above works, visit a 4S shop to eliminate the tire pressure warning. What to do if tire pressure is insufficient: If no damage is visible, simply inflate to normal pressure and reset the tire pressure system. If inspection reveals a puncture, drive to a tire shop for repair, then reinflate. If the low pressure warning reappears after inflation without any punctures, it may be due to air leakage caused by rim deformation. It's recommended to check the rim and replace it if necessary.

13

2

Share

Can You Apply the Brakes During Parallel Parking?

When entering a parking space, you should not come to a complete stop, but you can apply the brakes. However, the vehicle must not be brought to a halt until it is fully within the parking space, after which you can stop and then exit. Below is additional information about the Subject 2 driving test: Subject 2, also known as the minor road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skill test, which includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. During the Subject 2 test, there are specific instances where applying the brakes is required, such as when stopping at a designated point on a slope during hill starts, during parallel parking, and when stopping while reversing into a garage. However, apart from these specific items, stopping midway is not permitted in other sections of the test, meaning the speed cannot drop to zero.

9

1

Share

Is it considered passing if the reverse parking distance is less than 10 centimeters?

It is considered passing as long as you don't cross any lines during the process and safely park in the designated space. The distance between the car and the sides is not important; the key is not to cross any lines throughout the entire process. Here is some extended information about reverse parking: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013. It assesses the driver's ability to maneuver the vehicle in a confined space. Reverse parking is one of the assessment points in the driver's test, requiring the driver to correctly reverse the vehicle into the garage from both sides while in motion. There is a time limit for the reverse parking test. The test area is 16 meters long and 6.83 meters wide, while the garage is 5.25 meters long and 2.31 meters wide.

7

2

Share

Can You Shift Directly from 4th to 2nd Gear?

No, here are the precautions for shifting gears in a manual transmission car: Gear Skipping Issue: Many drivers pursue excitement and often shift directly from 1st gear to 3rd gear when starting. This practice is not advisable. Although it may feel thrilling, it can cause severe damage to the transmission. Frequent gear skipping leads to excessive wear on commonly used gears, posing risks and harming the transmission. Turning: Do not press the clutch when turning. Turning is a technical challenge for many novice drivers. Pressing the clutch while turning puts the car in a semi-engaged state, overloading the bearings and reducing the lifespan of the clutch plate. Therefore, avoid pressing the clutch when turning, as it is both dangerous and harmful to the clutch plate.

7

1

Share

Do I need to file a record with the DMV for installing fog lights?

No, because the DMV does not handle such services. This is considered illegal modification and is not allowed. Below is relevant information about vehicle modifications: The vehicle modification registration services accepted by the DMV include: changing the body color; replacing the engine; replacing the body or frame; replacing the entire vehicle due to quality issues; changing the use nature of the vehicle (e.g., from commercial to non-commercial or vice versa); and relocating the vehicle owner's residence in or out of the DMV's jurisdiction. Vehicle modifications allowed for owners include: installing front and rear anti-collision devices on small and micro passenger vehicles; adding windshields, water tanks, toolboxes, spare tire racks, etc., to cargo vehicles; and enhancing interior decorations. Any other modifications are considered illegal, and the DMV will not process them.

12

2

Share

Should the clutch be fully released on a slope start?

Clutch needs to be slightly pressed and then slowly released completely. The working process of the clutch has the following two points: Working process: The diaphragm spring is installed between the clutch cover and the pressure plate to generate pre-compression deformation, forming pressure on the pressure plate to tightly press the driving and driven parts of the clutch, that is, the clutch is in the engaged state. Separation process: Step on the clutch pedal, the pedal moves to the left, the push rod moves to the left, and the diaphragm spring separation plate is pushed to the left through the cylinder and working cylinder. Affected by this, the diaphragm spring uses the support pin fixed on the clutch cover as a fulcrum to move the large end to the right, while pulling the pressure plate to the right through the action of the separation plate.

20

5

Share

How to Reset the Maintenance Light on a Geely Binyue?

Why is the Weilitong Tire Pressure Monitoring Not Displaying?

Can You Apply the Brakes During Parallel Parking?

Is it considered passing if the reverse parking distance is less than 10 centimeters?

Can You Shift Directly from 4th to 2nd Gear?

Do I need to file a record with the DMV for installing fog lights?

Should the clutch be fully released on a slope start?

Are Yunnei and Yunnei Devoe the Same?

Will the car stall when starting in second gear?

What are the scoring criteria for parallel parking?

Does the Side Mirror Touching the Line Count as Passing in Parallel Parking?