How to Reset the Maintenance Light on a Ford Raptor?

1 Answers
OSkylar
07/29/25 2:36am
Ford Raptor maintenance light reset method is as follows: 1. Press and release the SELECT/RESET button to display "OIL-LIFE-XXX%-HOLD". 2. Hold the SELECT/RESET button for 2 seconds, then cancel to reset the oil life to 100%. 3. Only when "OIL-LIFE-SET-TO-XXX%" is displayed, release the SELECT button, then hold the SELETC/RESET button to change the oil life and start estimation. Each press and release will reduce the life by approximately 10%.
Was this review help?
11
4
Share
More Forum Discussions

What Components Make Up a Car Suspension System?

An automobile suspension system consists of elastic elements, guiding mechanisms, and shock absorbers, with some suspensions additionally including buffer blocks and anti-roll bars. The elastic elements encompass various forms such as leaf springs, air springs, coil springs, and torsion bar springs. Modern passenger cars predominantly utilize coil springs and torsion bar springs, while premium luxury coaches employ air springs. Typically referring to independent suspensions, car suspensions serve as crucial components ensuring ride comfort. Simultaneously, functioning as force-transmitting connectors between the frame/body and axles/wheels, they represent one of the vital safety-critical systems enabling proper vehicle operation.
8
0
Share

What are the penalties for motor vehicles not driving in the designated lane?

According to the Road Traffic Safety Law, drivers who fail to drive in the designated lane will be fined and have three points deducted from their driving license. When approaching a traffic signal intersection, drivers should change lanes in advance to avoid the danger caused by not following the designated lane. The directional lane markings are designed to guide vehicles in the correct direction at intersections. Such markings are commonly found at busy intersections to clarify the direction of travel, ensure orderly traffic flow, and reduce congestion. A variable lane, indicated by multiple diagonal lines on the side, is a lane that can change its direction based on real-time traffic flow.
7
0
Share

What is the solution when the car battery is dead due to leaving the headlights on?

The solution when the car battery is dead due to leaving the headlights on is: use jumper cables to connect the battery to the car for charging. The impacts of a dead car battery include: 1. Affecting the battery's lifespan, frequent power loss will shorten its service time; 2. Preventing the car from starting, making the vehicle unusable and causing other electrical devices in the car to malfunction; 3. During startup, it may cause data loss in the vehicle's control modules, leading to operational failure; 4. Overheating the starter motor and reducing its lifespan; 5. Forcing the alternator to operate under heavy load after starting, prolonged power deficiency may damage the alternator.
12
4
Share

What are the effects of a faulty ABS sensor?

ABS sensor failure will cause the ABS system to malfunction. The ABS warning light on the car dashboard will illuminate, and during emergency braking, the wheels may lock up, leading to skidding and loss of control. The vehicle can still be driven with a faulty ABS sensor, but the ABS system won't function, causing the wheels to lock during hard braking. It is essential to drive carefully and avoid sudden braking. ABS (Anti-lock Braking System) is designed to automatically control the braking force during vehicle deceleration, preventing wheel lock-up and maintaining a rolling-sliding state (with a slip ratio around 20%) to ensure maximum traction between the wheels and the road surface.
11
5
Share

What does ECT installed in the car mean?

ECT installed in the car refers to the transmission electronic control mode switch, which can quickly increase the engine speed, but will significantly increase fuel consumption. It is mostly used during highway driving. When activated, the throttle feels more responsive and direct, with gear shifts typically occurring above 4500 RPM. When ECT is turned on, it operates in sport mode, providing increased torque but higher fuel consumption. When turned off, it switches to economy mode, which is more fuel-efficient. The ECT button is commonly found in Japanese cars, particularly in Toyota vehicles. This system is called the Electronic Throttle Control System and has three modes: normal, sport, and snow mode.
8
3
Share

What does MT mean in manual transmission?

MT is the abbreviation for manual transmission. MT is also known as a mechanical transmission, which requires the driver to manually shift the gear lever (commonly known as the "gear stick") to change the gear meshing position inside the transmission, thereby altering the gear ratio to achieve speed variation. The advantages and disadvantages of manual transmission are as follows: Advantages: 1. Faster response during acceleration and overtaking (for skilled drivers); 2. High transmission efficiency; 3. Simple structure, easy to repair. Disadvantages: 1. Relatively complex operation (requires perfect coordination between the clutch and gear lever); 2. Higher driving skill requirements (improper operation can easily lead to gear dragging or stalling).
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.