How to Reset the Maintenance Light on a Ford Focus?

1 Answers
VanEthan
07/25/25 1:26am
Without pressing the brake pedal, press the start button to power on the vehicle. Use the control buttons on the steering wheel to navigate to the "Oil Life" page for reset. Select the corresponding option using the steering wheel's selection buttons. The dashboard will display the "Reset" prompt. Finally, press the "OK" (confirm) button.
Was this review help?
12
3
Share
More Forum Discussions

How to use the L and R buttons next to the driver's seat?

The usage of the L and R buttons next to the driver's seat is as follows: Press the button to L or R to adjust the position of the left or right side mirror. Below is an introduction to the side mirror: 1. Function: When there is an emergency ahead that requires sudden braking, observing the central rearview mirror can tell whether there is a car following closely behind, so you can appropriately ease the braking based on the distance from the front to avoid a rear-end collision. 2. Principle: The side mirror outside the car window is a convex mirror, which utilizes the principle of light divergence to expand the field of view, thereby better noticing the situation of vehicles behind. The image is the intersection point of the reverse extension lines of reflected light, which does not actually exist, so the image formed is a virtual image.
14
3
Share

Will the sunroof generally leak after a few years?

Generally, the sunroof may leak after a few years due to the aging of the sunroof sealing strip. Here is some relevant information about sunroofs: Functions of a sunroof: It can quickly lower the temperature, eliminate fog, and rapidly exchange fresh air. Opening the sunroof while driving can quickly increase the air circulation speed inside the car, thereby improving ventilation in the cabin. Precautions for using a sunroof: Open the sunroof in traffic jams to prevent exhaust fumes from entering the car. During traffic jams, all vehicles are stationary, and exhaust fumes inevitably disperse in the air. Open the sunroof after exposure to sunlight to balance the interior temperature. In hot summers, after the car has been exposed to the sun, the interior temperature becomes very high. At this time, the owner should promptly open the sunroof.
20
4
Share

Do You Need to Press the Brake to Start a Car?

Starting a car requires pressing the brake for automatic transmission vehicles. However, pressing the brake is not necessary when starting the engine, depending on the gear position: unless the car is in Neutral (N) gear and the handbrake is not engaged. For safety reasons, automatic transmission cars are generally designed to start the engine only in Park (P) or Neutral (N) gear, making brake pedal pressure optional. If the vehicle is in Reverse (R) or Drive (D) gear, it cannot be started because engaging these gears transfers engine power to the wheels, causing the car to move upon ignition. Control System: Therefore, as a precaution, automatic transmission vehicles are equipped with a control system that prevents starting in Reverse (R) or Drive (D) gears. The engine can only be started when the gear is in Park (P) or Neutral (N).
16
4
Share

What are the causes of abnormal noises when a new car turns?

The reasons for abnormal noises when a new car turns are: 1. The brake pads have not yet been properly worn in, and the noise will disappear after the break-in period; 2. During driving, small sand particles may enter between the brake disc and brake pads, causing abnormal noises due to friction. Generally, these particles will fall out after some driving. The first 1,000 kilometers of a new car's usage is the break-in period, during which the focus is on the break-in of the braking system. If not properly worn in, abnormal noises are likely to occur. Some owners may slam on the brakes frequently to speed up the break-in process. While this can quickly wear in the brake pads, it also shortens their lifespan, so it's best to avoid this practice.
4
2
Share

Where is the air conditioning filter of the Voslo?

The air conditioning filter of the Voslo is located inside the glove compartment. Generally, the air conditioning filter should be replaced every 10,000 kilometers. If the filter is dirty, you can clean it from the reverse side using compressed air. Hold the air gun about 5cm away from the filter and blow at a pressure of 500kPa for approximately 2 minutes. Never wash it with water, as this can easily damage it. The Voslo is a compact business vehicle with a body length, width, and height of 4420mm, 1695mm, and 1825mm respectively, and a wheelbase of 2695mm. Its straight waistline design adds more stability. Inside the car, the second-row seats are equipped with air conditioning vents and an ashtray, and there is a separate air conditioning adjustment knob for passengers to adjust the airflow themselves.
15
4
Share

What is the fuel consumption of smart?

Each model of smart has different fuel consumption. Taking the Smart Fortwo 2019 0.9T 66 kW Hardtop Pioneer Edition (China VI) as an example, its fuel consumption is 4.4 liters per 100 kilometers. The vehicle dimensions are 2695 mm in length, 1663 mm in width, and 1555 mm in height, making it a 3-door, 2-seater microcar. It is equipped with a 0.9T turbocharged engine and a 6-speed dual-clutch transmission. The car has a maximum power of 66 kW, a maximum torque of 135 Nm, and a maximum horsepower of 90 PS. The front suspension type is MacPherson independent suspension, and the rear suspension type is torsion beam non-independent suspension with a monocoque body structure.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.