How to Reset the Maintenance Light on a Citroen C-Quatre?

2 Answers
McAvery
07/25/25 12:34pm
Method to reset the maintenance light on a Citroen C-Quatre: Turn off the ignition switch of the C-Quatre. Then press and hold the maintenance mileage reset button. After turning on the ignition switch, the odometer will start counting down. When the display shows "=0" and the maintenance light goes off, it indicates that the maintenance indicator has been successfully reset. Additional information: 1. Car maintenance refers to the regular preventive work of inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life. 3. Routine maintenance includes changing the engine oil and oil filter, replacing the three filters (air, cabin air, and fuel filter), checking and topping up brake fluid, coolant, and power steering fluid. The first maintenance for a new car is at 5,000 kilometers, and it is free. Remember to bring the maintenance manual, user manual, service network contact list, first free maintenance voucher, and pre-sale inspection certificate.
Was this review help?
7
1
Share
LaNorah
08/11/25 8:25pm
I've been driving a Citroen C-Quatre for almost ten years and have cleared the maintenance light multiple times. It's quite simple, so let me share the steps with you. First, park the vehicle securely, insert the key, and turn it to the second position, which is the ON position, but do not start the engine. On the dashboard, locate the small reset button, usually labeled 'reset' or marked with an arrow icon. Press and hold it for 10 to 15 seconds without releasing. You'll see the maintenance indicator light blink a few times and then turn off, indicating a successful reset. Remember, before clearing the light, make sure the vehicle has actually undergone maintenance, such as an oil change or filter replacement, otherwise the light will come back on soon, and your effort will be in vain. If it doesn't work the first time, don't worry—try turning off the key, waiting a few seconds, and repeating the process. I usually use a mobile app to track maintenance dates, which, combined with the light reminder, makes things much easier. It's also a good idea to check your user manual to confirm the exact procedure for your specific model year, as the button location might vary slightly between different C-Quatre models. I've seen friends accidentally press the wrong button, wasting time starting over. Developing a regular maintenance habit can help avoid more trouble, such as checking the brake system or tire wear.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

Are the Bumpers at 4S Stores Genuine?

Under normal circumstances, if you request a 4S store to install a genuine bumper, the store is usually required to use original equipment manufacturer (OEM) parts. Here are the relevant details: 1. The advantage of OEM bumpers lies in their toughness; even under high pressure, they are unlikely to deform. 2. Bumpers available in the market are generally categorized into OEM and aftermarket types. OEM bumpers are supplied directly by the original manufacturer, while aftermarket bumpers are typically produced by third-party manufacturers. 3. Since OEM bumpers are supplied directly by the manufacturer, they naturally offer better quality assurance. Although they may be more expensive, bumpers are, after all, a critical safety component.
7
2
Share

What does cruise mean?

In automobiles, cruise refers to the cruise control system. When a car is driving steadily on the highway, the driver can use this function to maintain the current speed for constant-speed driving. After activating this function, the driver no longer needs to control the accelerator pedal, making it a highly practical feature. How cruise works: The cruise control system operates by having the cruise control module read the pulse signal from the vehicle speed sensor and compare it with the set speed, then issuing commands to the servo mechanism to mechanically adjust the throttle opening, either increasing or decreasing it, to keep the vehicle at the preset speed. Electronic multifunction cruise control eliminates the mechanical control parts of the cable-type cruise control, adopting precise electronic control for more accurate operation and avoiding the risk of mechanical failure. Components of cruise: The cruise control system consists mainly of a control switch, control module (cruise computer), and servo (actuator) in the case of cable-type cruise control. The working principle of the cable-type cruise control system involves the cruise control module reading the pulse signal from the vehicle speed sensor and comparing it with the set speed to adjust the throttle opening, either increasing or decreasing it, to maintain the vehicle at the preset speed. For example, when the vehicle is going uphill and the speed drops, the pulse signal from the speed sensor decreases, and the control module will command the servo actuator to open the throttle to a corresponding angle to maintain speed. Conversely, when going downhill, the throttle opening will be reduced.
16
2
Share

What are the reasons for wiper blade noise?

Loud noise when the wiper is activated is mainly caused by: 1. The spring of the wiper arm being too tight. 2. Excessive wear on the friction surface of the wiper blade. 3. The friction surface of the wiper blade being uneven or deformed. 4. Solutions: (1) If the spring of the wiper arm is too tight, the solution is to slightly stretch the spring. (2) If the wiper blade is worn or the friction surface is uneven or deformed, it is recommended to replace the wiper blade. (3) You can check if the frame holding the rubber strip of the wiper is slightly bent.
11
0
Share

Does the car radiator need cleaning?

Car radiators do need cleaning. Here are the relevant steps: 1. Ensure the engine is cool and turned off. 2. Open the drain plug at the bottom of the radiator to let the coolant flow into a bucket. The coolant should be properly disposed of to avoid environmental harm. 3. Close the drain plug and fill the radiator with water. 4. Start the engine, turn on the heater control system (this will open the heater control valve), add cooling system cleaner, and let the engine idle for 30 minutes (or follow the instructions on the cleaner bottle). 5. Turn off the engine and let it cool for 5 minutes. Drain the liquid from the radiator. 6. Close the drain plug, fill the radiator with water, and let the engine idle for 5 minutes. Then refill with a 50/50 mixture of water and ethylene glycol antifreeze/coolant (use the same type of coolant previously used in the car).
2
3
Share

How to Check the Manufacturing Date of a Tire?

On one side of the tire, there is usually a DOT marking. The tire manufacturing date code format is as follows: the first two digits indicate the production week, and the last two digits indicate the production year. Below is related information about the functions of tires: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit traction and braking torque to ensure good adhesion between the wheel and the road surface, improving the car's power, braking, and passability; work together with the car suspension to mitigate impacts during driving and dampen resulting vibrations. 3. Prevent severe vibrations and early damage to car components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.
10
0
Share

How to Solve the Problem of Vehicle Pulling to One Side?

If a large vehicle is pulling to one side, it is necessary to measure the toe-in, correct the camber angle, inspect the kingpin, and perform tire rotation to resolve the issue; if a small car is pulling to one side, generally performing a four-wheel dynamic balance can solve the problem. Below are the relevant details: 1. Vehicle pulling refers to the phenomenon where a car, while driving straight on a flat road, automatically veers to one side, causing the line connecting the centers of the front and rear axles to not align with the centerline of the driving trajectory. 2. In mild cases, pulling can cause tire wear and tire scrapping, while in severe cases, it can lead to dangerous situations such as tire blowouts and loss of vehicle control. 3. There are many reasons for vehicle pulling, and generally, the following faults can cause it: unequal tire pressure on both sides, incomplete separation of the front brake, and failure of the front spring.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.