How to Reset the Maintenance Light on a Changan Haval H6?

How Much Does Insurance Pay for a Car Flooded in Natural Disasters?

If a car is parked and gets flooded, and the owner has purchased comprehensive insurance, the compensation will be based on the full value of the comprehensive insurance purchased by the owner. If the car is flooded while being driven, for those who purchased comprehensive insurance and water ingress insurance before September 1, 2020, the compensation will also be based on the full value of the comprehensive insurance purchased by the owner. For those who purchased comprehensive insurance after September 1, 2020, full compensation is also available. Those who did not purchase comprehensive insurance or whose cars were flooded and stalled due to secondary ignition are not covered. Below is more information about car insurance: Introduction: Vehicle insurance, also known as auto insurance, refers to a type of commercial insurance that covers personal injury or property damage caused by natural disasters or accidents involving motor vehicles. Classification: Vehicle insurance can be divided into commercial insurance and compulsory traffic insurance. Commercial insurance includes main vehicle insurance and additional insurance.

13

4

Share

Can I Change the Engine Oil Myself?

You can change the engine oil yourself. The functions of engine oil: Lubrication and friction reduction: It forms an oil film between two sliding surfaces to prevent friction and ensure smooth operation of components; Auxiliary cooling: The engine generates high temperatures during operation, and when the oil reaches the operating parts, it absorbs heat and carries it away, aiding in heat dissipation; Shock absorption and buffering: When the pressure in the engine cylinder rises sharply, it suddenly increases the load on the piston, piston skirt, connecting rod, and crankshaft bearings. This load is transmitted and lubricated through the bearings, cushioning the impact load. Main components of engine oil: The main components of engine oil are base oil and additives. Base oil is a non-volatile oil extracted from plant seeds, flowers, roots, or fruits, which can lubricate the skin and is directly used for skin massage. It is also the best carrier oil for diluting essential oils.

15

5

Share

What are the reasons for the central locking system not being able to lock the car?

The reasons why the central locking system cannot lock the car are that there is a problem with the central locking system of the motor vehicle, the remote key is damaged, or the vehicle door is not completely closed. If the vehicle lock is malfunctioning, you can try to lock the motor vehicle using the mechanical key. After completing the locking process, make sure the vehicle is indeed locked. Below is an introduction to the automotive central locking system: Central Locking System: There are many types of central locking systems installed in cars, but their basic components mainly include the door lock switch, door lock actuator, and door lock controller. Switch: Most central locking switches consist of a master switch and sub-switches. The master switch is installed on the driver's side door, allowing the driver to lock or unlock all doors of the vehicle. Sub-switches are installed on other doors, enabling individual control of each door. Actuator: The central locking actuator is used to execute the driver's commands to lock or unlock the door. Door lock actuators come in three types: electromagnetic, DC motor, and permanent magnet motor. Their structures all involve changing polarity to reverse the direction of movement, thereby executing the locking or unlocking action.

7

0

Share

What is the fuel tank capacity of the Epica in liters?

The fuel tank capacity of the Epica is 64 liters, as officially announced. The Epica requires 92-octane gasoline, with a fuel consumption ranging from 7.5 to 8.6L per 100 kilometers. A full tank can cover a distance of 744 to 853km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level is accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

1

2

Share

Where is the steering wheel torque sensor located?

Steering wheel torque sensor is located on the steering column below the steering wheel. Locate the power assist motor, which usually has a small metal cover. The component with four wires and a connector is the steering torque sensor. Remove the small metal cover to see it. The torque sensor is one of the key components in electronic power steering systems. It measures the magnitude and direction of the torque applied by the driver on the steering wheel, and converts it into electrical signals. The power steering ECU receives this signal along with vehicle speed signal to determine the direction and magnitude of assist power. Types of torque sensors: Non-contact torque sensor: The non-contact torque sensor connects input shaft and output shaft through a torsion bar. The input shaft has splines while the output shaft has keyways. When the torsion bar twists under steering wheel torque, the relative position between input shaft splines and output shaft keyways changes; Strain gauge torque sensor: The strain gauge sensor measures torque using strain gauge technology. Strain gauges attached to an elastic shaft form a measuring bridge. When the elastic shaft undergoes slight deformation from torque, the bridge resistance changes, which is converted into electrical signal changes to achieve torque measurement.

2

1

Share

Can a Smart Key Be Replaced If Lost?

If you lose your smart key, you can have it replaced at a 4S dealership or at some specialized key replacement shops. When replacing a remote key, the chip inside the key is what needs to be replaced. This chip is essential for the remote key to lock or unlock the car. The remote key uses a rolling code system, meaning each unlock uses a different password. The chip inside the remote key also controls the engine start function. Even if the car doesn't have a push-button start and requires turning a key, the chip in the remote key is still necessary. Without this chip, the engine cannot start, even if you have the mechanical key. Smart keys can generally be divided into two parts: the entry system and the start system. However, most keyless entry systems include the start function, with only a few models having just the entry feature. The smart entry system uses advanced RFID (Radio Frequency Identification) technology, which is a non-contact automatic identification method. It automatically identifies target objects and retrieves relevant data via radio signals, requiring no manual intervention and functioning reliably in various harsh environments.

12

1

Share

How to Reset the Maintenance Light on a Changan Haval H6?

How Much Does Insurance Pay for a Car Flooded in Natural Disasters?

Can I Change the Engine Oil Myself?

What are the reasons for the central locking system not being able to lock the car?

What is the fuel tank capacity of the Epica in liters?

Where is the steering wheel torque sensor located?

Can a Smart Key Be Replaced If Lost?

What are the key functions of the 2021 CR-V Fashion Edition?

What to Do When the Buick GL8 Audio System Mutes?

Where are the drainage holes located on the Golf 6?

Which button is the Bluetooth on the old Hyundai Elantra?