How to reset the maintenance light on a Cadillac ATSL?

Is a 125L Displacement Scooter Motorcycle Considered a Lightweight Vehicle?

A 125L displacement scooter motorcycle belongs to the category of lightweight motorcycles. A lightweight motorcycle refers to a motorcycle with an engine cylinder working volume not exceeding fifty milliliters, a maximum design speed not exceeding fifty kilometers per hour, and intended for single-person riding only. Lightweight motorcycles are a type of motorcycle and must meet all the technical standards and legal requirements stipulated for motor vehicles. Their maximum design speed, displacement, or total motor power are all lower than those of regular motorcycles. Their technical parameters and performance fall between electric bicycles and motorcycles, and they are motorcycles that can be driven by individuals under 70 years of age. Technical requirements for lightweight motorcycles: The handlebars, frame, and forks must be sturdy and reliable. The handlebars should rotate flexibly without any sticking, looseness, or deviation. The headlight, taillight, turn signals, rear license plate light, brake light, rearview mirror, license plate bracket, and speedometer must all be fully equipped. The volume and tone of the horn should be appropriate. Both front and rear wheels must be equipped with brakes. On dry, flat asphalt or concrete roads, when traveling at a speed of twenty kilometers per hour and using both front and rear brakes simultaneously, the wheel skid marks should not exceed a braking distance of four meters. Exhaust emissions and noise must not exceed the national standards.

13

2

Share

Is DOT4 Brake Fluid Universal?

Qualified brake fluids of the same quality grade can be mixed. If they are DOT4 brake fluids from reputable brands, they can be mixed. However, when switching from a lower-quality DOT3 brake fluid to a higher-quality DOT4 brake fluid, the original brake fluid must be completely drained. Brake fluids of different quality grades should not be mixed. Although the chemical properties, high-temperature, and low-temperature performance of brake fluids are compatible, there are slight differences in their formulations, which can cause minor chemical reactions when mixed. Therefore, mixing brake fluids can lead to unpredictable consequences, and it is strongly advised not to attempt it. Precautions for Replacing Brake Fluid: It is best to replace brake fluid at a 4S shop. There are two methods for replacing brake fluid: manual replacement and pressurized replacement using a brake fluid changer. Manual replacement is more common in small auto repair shops and typically requires two to three people to operate, with responsibilities divided into draining the old fluid, pressing the brake pedal, and adding new fluid. This method has two significant drawbacks: it is prone to air ingress, and the old fluid may not be completely drained. Determining When to Replace Brake Fluid: The first method is to follow the "maintenance manual" guidelines, which recommend replacement every 2 years or 40,000 kilometers, or when the fluid appears visibly cloudy. The second method involves using "professional testing equipment" to check the fluid. Replacement is necessary if the water content reaches 2.5% or the boiling point falls below 230°C.

6

2

Share

What to Do When the ETC Falls Off?

ETC needs to be reinstalled and reactivated after falling off. The installation process for the ETC device is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly illuminate. The OLED screen will display "Label Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield, ensuring the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield. The chip should be inserted into the OBU device. Method to activate the ETC device: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If the screen shows "Label Invalid" when inserting and removing twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, press the button on the top of the electronic tag to enable Bluetooth. Turn on the phone’s Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag). Navigate to the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. After successful connection, upload a photo of the vehicle’s front to complete activation.

14

1

Share

What should I do if the engine warning light comes on in my Chevrolet Cruze?

If the engine warning light comes on, follow these steps: First, check if the engine is running normally. Look for issues like shaking or black smoke emissions. If present, avoid restarting the engine. Note: Never restart the engine if the light is red. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The car will perform a self-check after powering on. Wait 5-10 seconds to see if the warning light turns off. If the light remains on, visit a service center promptly. Technicians can use a portable diagnostic tool to read the trouble codes, identify the issue, and perform targeted repairs. There are seven main reasons for an engine warning light: 1. Sensor malfunction: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may fail, have poor connections, or lose signal. This prevents the ECU from accurately obtaining engine data, triggering the warning light. 2. Fuel or oil quality issues: Using fuel or oil not meeting manufacturer specifications can cause engine wear and trigger the warning light. 3. Poor fuel-air mixture combustion: This leads to carbon buildup or engine knocking. The oxygen sensor detects this and alerts the ECU, illuminating the warning light. Causes include faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines. 4. Turbocharger issues: Problems with the intake boost system or turbocharger can trigger the light. Common turbocharger failures may also cause oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. 5. Intake problems: Clogged engine passages due to dirty or uncleaned air filters can lead to intake issues and trigger the warning light. 6. Exhaust problems: Faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings can cause exhaust issues. The catalytic converter is most commonly affected by leaded gasoline, improper lubricant additives, physical damage, or fuel system failures. 7. Anti-theft system malfunction: If the car's electronic anti-theft system fails or the immobilizer and engine ECU are mismatched, the engine may not operate correctly, and the warning light will illuminate.

19

5

Share

How to check tire pressure on the 2021 Yidong Plus?

Adjust the function interface on the steering wheel to view the tire pressure display screen. Go to a repair shop and have the mechanic use professional equipment to perform a tire pressure check, which will display the vehicle's tire pressure.

18

5

Share

How to fix Volkswagen EPC fault?

Intake system troubleshooting, use of qualified fuel, and cleaning of the throttle body. Remove carbon deposits from related parts. Re-flash ECU related data. Other faults cannot be ruled out, and the specific cause should be determined by reading the fault codes.

14

0

Share

How to reset the maintenance light on a Cadillac ATSL?

Is a 125L Displacement Scooter Motorcycle Considered a Lightweight Vehicle?

Is DOT4 Brake Fluid Universal?

What to Do When the ETC Falls Off?

What should I do if the engine warning light comes on in my Chevrolet Cruze?

How to check tire pressure on the 2021 Yidong Plus?

How to fix Volkswagen EPC fault?

What Causes a Strong Gasoline Smell?

Where to handle 11 points deducted from a B2 driver's license?

Where is AIWAYS New Energy Vehicles Produced?

What Do the Various Markings on Car Tires Mean?