How to Reset the Maintenance Light on a BMW X4?

1 Answers
Erica
07/30/25 7:48am
BMW X4 maintenance reset steps: 1. Turn on the ignition without starting the vehicle; 2. Press the button on the left side of the instrument cluster, hold the button and switch the ignition to the on position; 3. After holding the button for 5 seconds, the maintenance status will be displayed, including the maintenance cycle, oil change service, inspection service, and remaining mileage; 4. Hold the button for another 5 seconds to enter the reset mode. During the flashing process, first release the button, press it again, and then release it to reset the mileage maintenance. The BMW X4 is a midsize SUV with a body structure of a 5-door, 5-seat crossover. The vehicle dimensions are 4763mm in length, 1926mm in width, and 1632mm in height, with a wheelbase of 2864mm. The suspension system features a double-joint spring strut front axle and a five-link rear suspension combination.
Was this review help?
3
0
Share
More Forum Discussions

Should the Arrizo 5 use 5w30 or 5w40?

Arrizo 5 recommends using 5w30. This car is equipped with a 1.5-liter naturally aspirated engine across the entire lineup, and this engine can use 30 or 20 viscosity oil. When selecting oil viscosity, it is essential to choose based on the technical characteristics of your car's engine. During normal engine operation, the oil forms a film on the surface of various engine components, which reduces wear between parts and lowers the operating resistance of engine components. The oil viscosity should not be too high or too low. If the viscosity is too low, the oil cannot form a stable film during engine operation, which will increase engine wear. If the viscosity is too high, it will cause increased resistance during engine operation, leading to reduced engine power and higher fuel consumption. The body dimensions of the Arrizo 5 are 4572mm in length, 1825mm in width, and 1482mm in height.
12
3
Share

What to Do When the Car's One-Button Start Does Not Detect the Key?

Solutions for when the car's one-button start does not detect the key: 1. Check if the key is out of battery. If the key shows signs like reduced remote control distance or decreased sensitivity, it indicates the key battery is nearly depleted. In this state, the one-button start function will not work properly, and the battery needs to be replaced. 2. Check if there is any electromagnetic interference nearby, such as signal interference sources. Some dash cams, if not properly shielded, can also cause interference, preventing the key from being detected. 3. Verify if there was an operational error, such as the gear not being in the P (Park) position. The car's one-button start is a component of smart cars, designed to simplify the ignition process with a single button, which can also be used to turn off the engine. The one-button start can be installed in place of the original key lock or as an independent panel modification.
4
0
Share

What Mercedes-Benz car has a 4.0-liter engine?

Mercedes-Benz GL SUV-class vehicles are equipped with 4.0-liter engines. Engine displacement and automobiles: The space volume that the piston moves from top dead center to bottom dead center is called cylinder displacement; if the engine has multiple cylinders, the sum of all cylinders' working volumes is called engine displacement. It is generally expressed in liters (L). Engine displacement is one of the most important structural parameters, which represents the size of the engine more accurately than bore diameter and cylinder count. Many engine specifications are closely related to displacement. Displacement classification: In China, passenger vehicle classification is determined by engine displacement. Mini cars have displacements ≤1.0L; compact cars range from 1.0-1.6L; midsize cars range from 1.6-2.5L; executive cars range from 2.5-4.0L; and luxury cars have displacements >4.0L.
5
4
Share

Does the 10th-generation Accord have a chassis lifting function?

10th-generation Accord does not have a chassis lifting function. Introduction to the chassis: The chassis refers to the combination of the transmission system, running system, steering system, and braking system on a car. Functions of the chassis: To support and install the car engine and its various components and assemblies, forming the overall shape of the car, bearing the engine power, and ensuring normal driving. Related functions of the chassis: The function of the chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, and receiving the power of the engine to make the car move and ensure normal driving.
18
5
Share

Where is the three-way catalytic converter located in the 10th generation Civic?

Installed in the vehicle's exhaust system, it is the most important external purification device. Working principle: When high-temperature exhaust gases pass through the purification device, the purifying agents in the three-way catalytic converter enhance the activity of CO, HC, and NOx gases, promoting specific oxidation-reduction chemical reactions. CO oxidizes at high temperatures into colorless, non-toxic carbon dioxide gas; HC compounds oxidize into water (H2O) and carbon dioxide; NOx reduces into nitrogen and oxygen. These three harmful gases are transformed into harmless gases, thereby purifying the vehicle's exhaust. Electronic fuel injection system: The electronic fuel injection system in a car engine generally consists of three major components: the fuel injection circuit, sensor group, and electronic control unit. If the injector is installed in the original carburetor position, meaning there is only one gasoline injection point for the entire engine, this is called single-point fuel injection. If injectors are installed on the intake pipe of each cylinder, meaning gasoline is injected into the cylinders from multiple locations (at least one injection point per cylinder), this is called multi-point fuel injection.
13
3
Share

How long does it take to fully charge the BAIC EU5 with fast charging?

The battery capacity of the BAIC EU5 is 54 kWh, and it takes approximately 7.7 hours to fully charge. BAIC New Energy EU5 interior: The interior design of the EU5 is relatively simple and elegant, without many complicated buttons, but it doesn't replace everything with a large screen like many new energy models. The floating center console design gives a relatively fashionable feel, and the interior quality has also been greatly improved. It emphasizes the concept of intelligent connectivity, and its performance in terms of configuration is also quite good. BAIC New Energy EU5 powertrain: The R500 version has a pure electric comprehensive range of 416 km, while the R550 version has a pure electric comprehensive range of 450 km, which is basically the top level among domestic electric models. The new car is equipped with a motor with a maximum power of 160 kW. The BAIC New Energy EU5 has strong product competitiveness, but there are also several issues that need optimization. Although the entry price of the R500 model is 129,900 yuan, which is in line with the industry average, it does not have any cost-performance advantage. Moreover, BAIC's brand premium in China cannot keep up with automakers like Geely, BYD, and Great Wall.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.