How to reset the maintenance light on a BMW?

1 Answers
KinsleyRose
07/29/25 4:55pm
BMW maintenance light reset method is as follows: 1. Press and hold the left button on the instrument panel while turning on the ignition, keep holding for more than 5 seconds; 2. When "SRV" appears on the display, release the button, the display will flash; 3. Press the left button once more to reset the maintenance light. Basic maintenance light reset steps: 1. With the engine off, press and hold the trip reset button below the tachometer; 2. Turn the ignition to ON position, release the trip reset button, "SERVICE" will appear on the display; 3. Pull out the minute button on the clock, turn it clockwise, the mileage will appear on the display; 4. Turn off the engine to complete the reminder reset.
Was this review help?
8
4
Share
More Forum Discussions

What Causes Weak Crawling in Excavators?

Excavator weakness may be caused by central oil seal leakage leading to pressure loss, or damage to the oil distribution plate. Here are more relevant details: 1. Swing joint leakage: The primary reason for weak crawling is severe leakage in the swing joint. Hydraulic oil must pass through the swing joint to travel from the upper part of the excavator to the lower walking device. If the swing joint leaks or is damaged, some high-pressure oil will flow into the return pipe, resulting in weak crawling and affecting the normal operation of the excavator. Therefore, it is necessary to inspect it to determine if the fault is caused by leakage. 2. Various valve failures: Inspection of control valves is also an essential step. Any malfunction in safety valves, throttle valves, check valves, balance valves, overflow valves, or walking reversing valves can potentially cause crawling issues in excavators. Control valve failures include stuck walking control valve spools, short travel, excessive clearance between the spool and valve bore, and reduced safety valve pressure, all of which can lead to weak right-side crawling.
20
3
Share

Is the BMW X5M equipped with a V8 engine?

BMW X5M is equipped with a V8 engine. Here are the relevant details: 1. The BMW X5M is powered by a 4.4L twin-turbocharged V8 engine, which delivers a maximum power of 423 kW and a maximum torque of 750 Nm. The engine's maximum torque is achieved between 2,200 and 5,000 rpm, while the maximum power is reached between 6,000 and 6,500 rpm. It is paired with an 8-speed automatic transmission (8AT) and features direct fuel injection technology, with an aluminum cylinder head and block. 2. The BMW X5M is a high-performance mid-to-large-sized SUV based on the BMW X5. Its body dimensions are: length 4,880 mm, width 1,985 mm, height 1,754 mm, and a wheelbase of 2,933 mm. It comes standard with a full-time four-wheel-drive system and uses a multi-plate clutch-type central differential.
15
1
Share

How to Scrap and Deregister a Vehicle in a Different Location?

If the vehicle is damaged and cannot be driven back to its original registration location, the owner can directly apply for scrapping at the vehicle's current location (the scrapping process will be carried out by a motor vehicle recycling company). Here is more relevant information: 1. Required documents: The documents to be submitted include: the original identity proof of the vehicle owner (if handled by someone else, the original identity proof of the authorized person and the original power of attorney must also be provided. Non-local residents must also present the original temporary residence permit). 2. Notes: When handling the procedure, all required documents must be brought. At the same time, to avoid causing trouble for yourself, vehicle owners must properly keep all vehicle-related certificates. The procedure is actually very simple, so do not mistakenly trust others and get scammed.
20
2
Share

Can the exam appointment be canceled on the mobile phone?

It can be canceled on the mobile phone. If you made the appointment via a mobile app, you can cancel it in the exam appointment section. If you made the appointment on the DMV website, you can cancel it through the online driving test subject appointment system. Whether canceled via mobile or computer website, you only need to bring your ID card to the local DMV to cancel. Related information: 1. Cancellation rules: If the applicant cannot attend the exam at the scheduled time, the appointment should be canceled one day in advance. If the applicant fails to attend the exam at the scheduled time, the exam will be marked as failed. 2. Driver's exam: The motor vehicle driver's exam is a qualification test organized by the DMV of the Public Security Bureau. Only by passing the driver's exam can one obtain a driver's license and legally operate a motor vehicle.
6
2
Share

How Does a Kerosene Pressure Lamp Work?

The working principle of a kerosene pressure lamp is as follows: First, preheat the tube system, then pump in 0.20-0.30MPa pressure to force kerosene into the tube, forming vapor that sprays onto the mantle. When ignited, it produces thorium dioxide, which has light-emitting properties, emitting incandescent light under the high-temperature flame. Usage of kerosene pressure lamps: When used outdoors as a camping light, kerosene pressure lamps perform far better than various electronic tube lights. They last longer (generally over 6 hours), have higher brightness, are environmentally friendly without battery pollution, can withstand winds below level 3-4, and can also be used in light rain. When used inside a tent, they have a certain dehumidifying function and can quickly raise the temperature inside the tent in winter. The relationship between kerosene pressure lamps and hurricane lamps: Kerosene pressure lamps are somewhat similar in appearance to hurricane lamps, but their working principles are not entirely the same, so there are also some differences in their specific constructions.
12
2
Share

Why Does the Car Exhaust Pipe Sound Louder?

Car exhaust pipe sound becoming louder may be due to a perforation in the exhaust muffler. Here is more relevant information: 1. Car Muffler Structure: The structure of a car muffler is such that after the engine completes its power stroke, the exhaust stroke follows. Exhaust is the process of expelling the waste gases from the cylinder. Since these gases are high-temperature and high-pressure, directly releasing them through the exhaust pipe would create significant noise. The muffler is a multi-stage flow and pressure distribution combination. 2. Car Muffler Principle: (1) It utilizes abrupt changes in pipe cross-section (i.e., changes in acoustic impedance) to reflect the sound waves propagating along the pipe back toward the source, thereby reflecting the sound energy back to its origin. (2) It uses reflections from several interfaces to make the initially forward-propagating sound waves return to the origin and then propagate forward again. This point converges with the second forward-propagating sound wave that has not yet been reflected, and the two waves are equal in amplitude and differ by an odd multiple of 180 degrees in phase, thus canceling each other out through interference.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.