How to Reset the Maintenance Light on a 2021 Geely Emgrand?

[AustinMarie]

In idle state, press and hold the odometer reset button on the instrument panel for 2-3 seconds to turn off the maintenance reminder. After servicing, the maintenance technician at the service station will use a computer to access the vehicle system settings, and the maintenance reminder light will be turned off.

[SanAlaina]

After my last maintenance for the 2021 Geely Emgrand, the service light was still on. It took me a while to figure out the reset method. The key is to turn the ignition to the ON position, which means the dashboard lights up but the engine doesn't start—this is usually the second position. Then locate the small TRIP button near the steering wheel (make sure not to press the wrong one), hold it down for about 10 seconds. Watch the service indicator on the dashboard—it will start blinking rapidly a few times before turning off. At this point, release the button, and you're done. Don't forget to perform the maintenance before resetting, otherwise, without the light reminder, you might miss the service window and risk major issues. I tried it myself, and the operation is quite safe—no need to worry about damaging the car. Also, the Emgrand's service light comes on roughly every 5,000 km to remind you to change the oil, etc. After resetting, the counter starts anew. Regular maintenance helps keep the car durable and fuel-efficient.

[DeHazel]

I often reset the maintenance light on my 2021 Emgrand myself, it's just a few simple steps. First, turn off the engine and only rotate the key to the ON position to illuminate the dashboard without starting the ignition. Then, press and hold the small trip reset button on the dashboard, located next to the speedometer, for five to ten seconds without releasing. You'll see the maintenance light start blinking and then completely turn off—this is when you can release the button to complete the reset. This operation is most convenient when the vehicle is stationary; don't attempt it while driving to avoid distraction. After resetting, remember to clear the maintenance record to help track the next service interval. Once, I got lazy and reset it without servicing, which later led to transmission issues costing more to repair—lesson learned. Overall, the Emgrand's design is quite user-friendly, and the operation takes less than a minute to complete.

[VonOlive]

As a regular owner who often drives the Emgrand, the method to reset the maintenance light is: Turn off the engine, turn the key to the ON position without starting, press and hold the TRIP button on the dashboard for about seven or eight seconds, and release it once the light flashes and disappears. Make sure the maintenance has been completed before performing this operation; otherwise, you may overlook necessary maintenance, increasing the risk of mechanical damage. It is recommended to refer to the owner's manual to confirm the steps and avoid confusion with button locations that may affect dashboard functions.