How to reset the maintenance light on a 2019 Mercedes-Benz C260L?

1 Answers
StCharlie
07/29/25 4:58pm
Method to reset the maintenance light on a 2019 Mercedes-Benz C260L: Turn on the ignition, hold the reset button with one hand, and turn off the ignition with the other hand; Keep holding the reset button until the clock and mileage on the dashboard completely disappear, then release the button; Press and hold the reset button again with one hand while turning the ignition back on. At this point, the maintenance reminder on the dashboard will flash. Continue holding the reset button until the reminder stops flashing; Turn the ignition back on or start the vehicle to check if the reset was successful. The 2019 Mercedes-Benz C260L, being the long-wheelbase version, appears very sleek and more proportionate than the standard version. It measures 4784mm in length, 1810mm in width, 1457mm in height, with a wheelbase of 2920mm.
Was this review help?
4
0
Share
More Forum Discussions

What are the engine models of the Haval H6?

Haval H6 has used a total of three engines, namely a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. The Haval H6 is a compact SUV under the Haval brand, with a wheelbase of 2680 mm, and dimensions of 4615 mm in length, 1860 mm in width, and 1720 mm in height. Below are the details of the Haval H6 engines: 1. Low-power version 1.5-liter turbocharged engine: This engine delivers 150 horsepower and a maximum torque of 210 Nm, with a maximum power speed of 5600 rpm and a maximum torque speed ranging from 1800 to 4400 rpm. 2. High-power version 1.5-liter turbocharged engine: This engine produces 169 horsepower and a maximum torque of 285 Nm, with a maximum power speed ranging from 5000 to 5600 rpm and a maximum torque speed ranging from 1400 to 3600 rpm. This engine is equipped with CVVL technology and direct fuel injection, and uses an aluminum alloy cylinder head and block. 3. 2.0-liter turbocharged engine: This engine generates 224 horsepower and a maximum torque of 385 Nm, with a maximum power speed of 5500 rpm and a maximum torque speed ranging from 1800 to 3600 rpm. All three engines are paired with a 7-speed dual-clutch transmission. The dual-clutch transmission offers fast gear shifting and high transmission efficiency.
11
5
Share

How to Close the Front Hood of the Nissan Sylphy?

When closing the engine hood of the Nissan Sylphy, first lower the hood support bracket with one hand while supporting the hood with the other hand. Slowly move it downward until the hood is about 50mm-60mm from closing, then release it to let it fall freely. You will hear a "clunk" sound, indicating the hood is locked. Below is some related information about the Sylphy's front hood: 1. The engine hood release switch inside the Sylphy is located below the left side of the dashboard. Gently pull the switch, and the engine hood will open slightly. Then, go to the front of the engine compartment, reach into the gap, and pull the latch upward to fully open the hood. 2. It is best not to slam the hood shut. Avoid applying too much force to the center of the hood, as it is made of aluminum alloy and excessive force can cause dents. The engine hood is typically structured with heat insulation material sandwiched in the middle, and the inner panel enhances rigidity. The geometric shape is designed by the manufacturer, usually in a skeletal form.
16
1
Share

What does the flashing red key on the Mazda3 Axela mean?

The flashing red key on the Mazda3 Axela indicates: The flashing red key on the Mazda3 Axela may indicate that the key's battery is dead or the key is out of the working range and cannot be detected. The solution is to replace the battery or bring the key within the working range. In addition to daily use for locking and unlocking the vehicle, the car key also has some hidden functions. Here are the related details: 1. Window closing function after turning off the engine. For drivers who have already exited the vehicle, pressing or holding the lock button can automatically close the windows. 2. Automatic trunk opening. Many keys have a trunk opening button. Pressing or double-clicking the trunk unlock button can automatically open the trunk. 3. Remote window opening. 4. Opening a single door. Pressing the unlock button can open only the driver's door, while other doors remain locked. 5. The small piece of paper on the car key. This serves as proof for key replacement in case the key is lost.
1
1
Share

Where is the cabin air filter of Oshan X70A located?

The cabin air filter of Oshan X70A is located on the passenger side, beneath the glove compartment near the center console. Looking upwards from the floor, you can see arrow indicators pointing to the three clips of the cabin air filter housing. Gently pry them open to access the cabin air filter inside. Below is an introduction to the functions of the cabin air filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities from the air such as dust, pollen, and abrasive particles. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture adsorption capabilities.
11
1
Share

Where is the VIN number located on the Leiling?

The VIN number of the Leiling is located at the lower left corner of the front windshield. Here is an explanation about the VIN number: The VIN number is the vehicle identification number, which consists of 17 digits and letters. It represents the number on the frame, transmission, and engine support frame, serving as the car's ID number. Below is the meaning of each of the 17 digits and letters: Characters 1-3: Represent the country of production, manufacturer, and vehicle type. Characters 4-8: Represent vehicle characteristics, such as vehicle category, engine type, body type, etc. Character 9: Represents the check digit, used to verify if the VIN is correctly filled. Character 10: Represents the production year. Character 11: Represents the assembly location. Characters 12-17: Represent the production sequence number of the vehicle.
3
5
Share

Where is the production location of Haval cars?

The production base of Great Wall Haval is located in Baoding City, Hebei Province. The following is an introduction to Haval cars: Haval is a sub-brand of Great Wall Motors, established in March 2013. Haval does not use the Great Wall logo. The Haval brand, mainly focusing on SUV models, operates in parallel with the Great Wall brand, using an independent logo and maintaining separate systems for product development, production, and services, primarily engaged in SUV production and sales. Its lineup includes three series: 1. Haval H Series: Haval H2s, Haval H2, Haval H4, Haval H5, Haval H6, Haval H6 Coupe, Haval H7, Haval H9. 2. Haval M Series: Haval M6. 3. Haval F Series: Haval F5, Haval F7.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.