How to reset the maintenance light on a 2018 Honda CR-V?

1 Answers
StEmmett
07/30/25 5:18am
The method to reset the maintenance light on a 2018 Honda CR-V is as follows: 1. Turn off the car's ignition switch; 2. Press and hold the trip button without releasing it; 3. Use the other hand to turn on the ignition switch and start the vehicle, then release the trip button; 4. When the instrument panel prompts for maintenance reset, press and hold the enter switch for 3 to 5 seconds. After the instrument panel makes a sound, confirm the completion, and the maintenance light will go off. Taking the 2018 Honda CR-V as an example, it belongs to the compact SUV category with body dimensions of: length 4585mm, width 1855mm, height 1679mm, wheelbase 2660mm, front track 1601mm, and rear track 1617mm.
Was this review help?
14
1
Share
More Forum Discussions

What is the fuel tank capacity of the 10th-generation Accord?

The fuel tank capacity of the 10th-generation Honda Accord is 56 liters. Below are some relevant descriptions about the 10th-generation Honda Accord's fuel: 1. The officially recommended fuel is unleaded gasoline with an octane rating of 92 or higher, meaning both 92 and 95 octane gasoline can be used. 2. To maintain the vehicle's good performance and proper operation, it is recommended to add a purifying additive that meets Guangqi Honda's quality standards every 5,000 kilometers. 3. Proper vehicle maintenance can optimize fuel economy. Follow the maintenance schedule and refer to the maintenance manual if necessary. 4. The gasoline grade used should comply with the manufacturer's specifications. The gasoline grade only represents a parameter of the gasoline's anti-knock performance. A higher grade indicates better anti-knock performance and has no relation to purity.
1
4
Share

What is the fuel tank capacity of the Hongqi HS7?

The fuel tank capacity of the Hongqi HS7 is 75 liters, as officially announced. Owners who have purchased the Hongqi HS7 can also check this information on the vehicle's configuration sheet. The Hongqi HS7 requires 95-octane fuel, with a fuel consumption of 8.6 to 10.9 liters per 100 kilometers. A full tank can cover a distance of 688 to 872 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
6
3
Share

Is the Prado equipped with a full-size spare tire?

The Prado's spare tire is a full-size tire. Below are the differences between full-size and non-full-size spare tires: 1. A full-size spare tire has the exact same specifications as the other four tires on the vehicle, while a non-full-size spare tire has a slightly smaller diameter and width compared to the other four tires. 2. A full-size spare can replace any temporarily or permanently unusable tire, whereas a non-full-size spare can only serve as a temporary replacement. 3. A non-full-size spare can only be used on non-drive wheels, while a full-size spare can replace any tire. 4. A non-full-size spare occupies less space in the car's trunk, whereas a full-size spare takes up more space.
12
0
Share

How to Replace the Key Battery for Mercedes-Benz A45?

Steps to replace the battery for Mercedes-Benz A45 key are as follows: 1. Before removing the mechanical key, gently press the switch on the back of the key. 2. Press the key cover switch on the back of the key to open the key cover. 3. Then push the battery compartment on the left side of the key. 4. A small flat-head screwdriver can be used to remove the old battery. 5. Ensure the new battery is placed with the positive side facing up. 6. Reinstall the key cover and mechanical key. 7. Operate the key's lock and unlock switches to check and confirm that the doors can be locked/unlocked. Additional notes regarding the battery: 1. Improper battery replacement may damage the car key. 2. Using an unsuitable or non-compliant battery may damage the car key. Pay attention to the voltage, size, and specifications when purchasing a new battery. 3. Be careful not to damage the key components when replacing the battery. 4. To prevent the key from failing prematurely, avoid pressing the unlock button outside the sensing area. 5. Being within a 1-meter range of a magnetic field may cause the battery to become magnetized and fail. 6. Ensure your hands are dry during the battery replacement process to avoid causing internal components to rust.
16
4
Share

How to Open the Front Hood of a Volkswagen Car?

Method to open the front hood of a Volkswagen car: 1. First, open the car door and sit in the driver's seat, then locate the engine switch lever on the left side of the driver's seat. 2. When you hear a click, pull the car engine handle by hand. 3. Check if the engine hood is open. If there is an obvious gap, it means the engine hood is open. 4. Press the safety button to open the engine hood. Then lift the front engine hood, pull up the car lever, and snap the top buckle into the engine hood. Notes: If you are not a professional, do not touch the engine hood, including other objects in the engine compartment, as it may easily cause problems. To close the engine hood, simply remove the hydraulic cylinder of the engine hood and then manually press it to close.
10
5
Share

How to Disassemble an Older Skoda Key?

To disassemble an older Skoda key, follow these steps: 1. First, eject the metal mechanical key from the car key. 2. After ejecting the mechanical key, you will notice a gap in the middle of the key. Use a flathead screwdriver to pry open the gap. 3. Once the cover starts to separate slightly, you can manually pull apart the key cover. 4. After removing the key cover, you will see the battery inside the car key. Use a thin screwdriver to pry out the battery along the groove. Here is some information about Skoda keys: 1. The unlocking functions of a Skoda key mainly include car unlocking, trunk unlocking, and car locking. 2. The remote key can only lock and unlock the car when the battery is sufficiently charged and the key is within a range of several tens of meters around the car. The locking or unlocking of the car is indicated by the flashing of all turn signals. 3. The car cannot be locked with the remote key when the driver's side door is open. If the car is unlocked without opening any door, it will automatically relock after 30 seconds. This feature prevents the car from accidentally remaining unlocked.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.