How to reset the maintenance light on a 2018 H6?
2 Answers
Insert the key, just insert it, do not turn it. Hold the operation lever next to the odometer for 5-10 seconds, then turn on the power. After another 5-10 seconds, start the car. Keep holding the operation lever throughout this process. If the wrench symbol is not cleared, repeat the same process a few more times. After the maintenance is completed, the technician will reset the maintenance light to zero through the setup program. The manufacturer sets different maintenance times for different models. Refer to the vehicle's user manual for when the maintenance indicator light comes on.
I've been driving my Haval H6 for several years, and whenever the maintenance light comes on, I need to reset it, otherwise the beeping sound is annoying. Here's my method: First, park the car in a safe place and turn off the ignition switch, turning the key to the off position. Then locate the settings button on the lower left side of the steering wheel and hold it down. Next, turn the key to the on position, where the dashboard lights up but don't start the engine. Wait about ten seconds, and the maintenance light will flash a few times and then go out. Release the button, and you're done. After resetting, I usually start the engine to confirm the light doesn't come back on. If it doesn't work the first time, maybe the button wasn't held steady, or the car needs to be checked at the 4S shop for other issues. During regular maintenance, the shop will reset it for free, but I prefer doing it myself to save time and money. Remember, regular maintenance extends the car's lifespan—don't keep putting it off. The oil and filters need to be changed on time.
