How to reset the maintenance light on a 2018 CR-V 1.5T?

1 Answers
DiWalter
07/24/25 2:37am
After turning off the ignition switch, press and hold the TRIP button without releasing it, then turn on the ignition switch, and then release the TRIP button. The instrument panel will prompt for maintenance reset. Press and hold the ENTER switch for 5 seconds, and the maintenance light will turn off after the instrument panel beeps. Here is more information about resetting the maintenance light on the Honda CR-V: 1. Utilize the personalized function for resetting: First, ensure the CR-V's power mode is in ON mode, park the vehicle and shift to P gear, press the information display button on the left side of the steering wheel, select the clock to set the display screen, and then press the vehicle maintenance information to reset the maintenance light. 2. When the car's maintenance light comes on, the owner should promptly take the vehicle to a 4S shop for maintenance. After the maintenance is completed, the maintenance light will naturally reset to zero.
Was this review help?
14
3
Share
More Forum Discussions

Is the Roewe i5 CVT transmission equipped with a steel belt or a chain?

The Roewe i5 CVT transmission uses a steel belt. There are two types of power transmission methods for CVT: one is a steel belt, and the other is a chain. Generally speaking, steel belts are usually suitable for engines with low torque, while chains are typically used for high-torque engines. From a practical performance perspective, chains are undoubtedly more robust and durable. Below is some relevant information about CVT: 1. Introduction: CVT refers to a type of automotive transmission, also known as a continuously variable transmission. 2. Difference from stepped transmissions: The difference between CVT and stepped transmissions is that its gear ratio is not a series of discrete points but a continuous range of values, which achieves good fuel economy, power performance, and smooth driving, while also reducing emissions and costs.
18
5
Share

Why is the reversing image not displayed when the Bora is in R gear?

The phenomenon of a black screen in the reversing image is most likely due to poor line contact. The specific details are as follows: 1. Check the lines: It is necessary to promptly inspect the connection points between the lines and the vehicle's installation to see if there is any loose connection. If there is, it will naturally cause abnormal imaging of the reversing image, and in this case, simply reconnecting it properly will suffice. Of course, it could also be because the video power line has aged, and you can try replacing it with a new one. 2. The reversing camera has been used for too long: Prolonged use of the reversing camera can lead to poor chip light sensitivity, and there may even be a lot of snowflake-like noise. Of course, it could also be due to defects in the car's circuit design.
17
1
Share

Does an engine speed of 5000 RPM damage the car when driving downhill in automatic transmission?

An engine speed of 5000 RPM when driving downhill in automatic transmission does not damage the car. The higher speed is fine as long as it is not maintained for a long time. Below are some related introductions about engine speed: 1. The engine operates within a certain speed range, and as long as the pointer does not exceed the redline area, there is no problem. The redline area is usually around 6000 RPM, so a speed close to 5000 RPM does not put too much pressure on the engine. 2. Generally, the higher the engine speed and the more frequently it is maintained at high speeds, the more severe the wear will be over time. Driving like this for a long time obviously carries some risks and will inevitably damage the car. This is because, at high speeds, the engine demands much higher cooling and lubrication. If the engine oil performance has degraded and the lubrication effect is poor, engine wear will accelerate significantly.
14
5
Share

What does it mean when the license status is locked?

When a driver's license is locked, it means the license is currently in an abnormal status. Relevant information is as follows: 1. Introduction: A locked driver's license will display an orange-yellow "Locked" label behind the license status. The primary reason for a license being locked is not completing the probationary period, which is also the most confusing aspect for new drivers who have just obtained their licenses. In fact, the main reason for locking during the probationary period is that license-related transfer procedures cannot be processed within one year. 2. Note: If the driver's license has been revoked for no more than two years, the vehicle owner must pass the subject one exam to "unlock" the license. If the lock is due to health reasons such as illness, the unlocking method is also simple—wait until recovery, undergo a medical examination, and the lock will be lifted upon passing the exam.
16
2
Share

What are the differences between 25G, 25K, and 25T?

25G, 25K, and 25T mainly have the following differences: 1. 25T type passenger car: It is one of the air-conditioned railway passenger car models of China Railway, designed and manufactured to meet the 160 km/h speed requirement of China Railway's fifth major speed increase. It was put into operation in January 2003, finalized in 2004, and is still in production today. 2. 25K type passenger car: It is an air-conditioned railway passenger car used by China Railway, where 'K' stands for express type. The 25K type passenger car was designed and manufactured for the express trains launched during China Railway's first major speed increase. 3. 25G type passenger car: It is modified based on the 25 type train, with an added air conditioner, a structural speed of 140 km/h, and a maximum operating speed of 120 km/h.
16
5
Share

What is the difference between R15 and R16 tires?

Tires R15 and R16 have the following differences: 1. There is a slight difference in tire width. 2. R15 tires have a relatively smaller contact area with the ground, resulting in less friction, which means better fuel efficiency and improved shock absorption. 3. R16 tires are the opposite, with more noticeable road feedback in terms of shock absorption but better handling feel. Below is a detailed introduction to the functions of car tires: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit traction and braking torque to ensure good adhesion between the wheels and the road surface, improving the car's power, braking, and off-road performance; work together with the car's suspension to mitigate impacts during driving and dampen resulting vibrations. 3. Prevent severe vibrations and early damage to car components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure safety, handling stability, comfort, and fuel economy.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.