How to reset the maintenance light on a 2017 Corolla 1.2t?

1 Answers
VonGianna
07/29/25 8:45pm
Press the one-touch start button to ignite. Press the trip meter reset button to switch to trip meter "A". Here is some relevant information about the Corolla maintenance light: 1. Maintenance Light: The maintenance light is a reminder function set by the manufacturer to prompt the owner to perform maintenance at certain mileage or time intervals. It appears in the form of an instrument panel or screen message or indicator light. Resetting the maintenance light means clearing the reminder information after completing maintenance, which is essentially resetting the information. 2. Purpose of the Maintenance Light: The purpose of the maintenance light is to record the mileage of important components, much like a timer in a sprint race, serving as a reminder for both the owner and automotive repair personnel. If the owner replaces the relevant components but does not reset the light, it will not affect the vehicle's performance, but it may cause issues for the next component replacement: it will be difficult to accurately know the usage time of the new components.
Was this review help?
6
4
Share
More Forum Discussions

How to Route the Generator Belt on Changan CS75?

Changan CS75 belt routing method is to pass through the crankshaft, with the tensioner on the back side of the belt, loop over the camshaft, position, lock, and then tighten the tensioner. The timing belt plays a connecting role, linking the timing wheel on the engine cylinder head at the top and the crankshaft timing wheel at the bottom. Here is additional information: Timing Belt: The timing belt is a crucial component of the engine's valve system, ensuring accurate intake and exhaust timing by connecting to the crankshaft with a specific transmission ratio. The reason for using a belt instead of gears is that belts produce less noise, have minimal self-variation, and are easier to compensate. Clearly, the lifespan of a belt is shorter than that of metal gears, so it needs to be replaced regularly.
12
1
Share

What are the length and width of the Lincoln Navigator?

The Lincoln Navigator has a length, width, and height of 5355*2073*1937mm, with a wheelbase of 3112mm. The car maintenance details are as follows: Minor maintenance schedule: Minor maintenance is required every 5000 kilometers or every six months. The main tasks include: changing the engine oil and oil filter, as well as cleaning the air filter. Maintenance purpose: Maintenance involves operations such as inspection, adjustment, tightening, lubrication, and replacement to keep the vehicle in good working condition. For any car, as the usage age increases and the mileage accumulates, its technical condition will gradually deteriorate. If not replaced in time, it will affect the normal operation and service life of the car, and may even lead to serious accidents.
4
2
Share

What to Do When the Brakes Are Stuck?

Solutions for stuck brakes: 1. Force start the car and rev the accelerator hard until the rear wheels start turning; 2. Remove the tire and gently tap the brake drum with a hammer or similar tool a couple of times to loosen the contact surface between the brake drum and the brake pads. If the brakes get stuck while driving an automatic transmission car, downshift while using the handbrake. When pulling the handbrake, press the release button and continuously pull the handbrake. After pulling it up, press the electronic handbrake and slowly bring the car to a stop. After rain or washing the car, if the brake drum gets wet and the car is parked for more than a day, the inner part of the brake drum and the surface of the brake pads can rust and seize, causing the brake pads to lock up. In such cases, the owner should not stop immediately but drive for a while and press the brakes a few more times to allow the moisture to evaporate, preventing rust.
15
0
Share

What type of brake does the Fengon 580 engine use?

Fengon 580 engine uses front ventilated disc brakes and rear disc brakes. The maintenance methods for car engines are as follows: Use high-quality engine oil: Engine oil, the lubricant for the engine, serves functions such as lubrication, cleaning, cooling, sealing, and reducing friction. Only by using qualified lubricating oil can the wear of engine parts be reduced and the service life extended. Therefore, it is important to regularly add high-quality engine oil, avoiding inferior substitutes, and never let the engine run low on oil. Use qualified antifreeze: Car engines rely on the radiator to cool down; otherwise, it can cause fatal damage to the engine. Thus, it is essential to ensure the coolant in the radiator remains at normal levels and to choose high-quality coolant. Especially in winter, the appropriate coolant should be selected based on the ambient temperature. In regular car maintenance, the engine antifreeze should be replaced every year.
20
0
Share

How to Deal with Door Rust?

If rust is found on the car door, it should be treated promptly to prevent the rust from spreading. The treatment methods are as follows: 1. Surface rust with a small area: If the rust is on the surface and the area is small, you can use water sandpaper to grind off the rust and then spray a layer of anti-rust paint. 2. Rust affecting the primer: If the rust has damaged the primer, the rust must be ground off, the primer sprayed, and then the topcoat applied. 3. Severe rust with large areas of paint peeling: If the door has severe rust with large areas of paint peeling, the rusted paint must be completely removed, filled with putty, and smoothed. After the putty hardens, repaint the door. 4. Rusted-through door: If the door is rusted through, repair is generally not recommended as the effect is limited, and rust may reappear after some time. It is advisable to replace the door.
14
3
Share

What is the fuel consumption of the 2010 CR-V 2.0 4WD model?

The fuel consumption of this vehicle is 11.2 liters per 100 kilometers. Below is an introduction to the CR-V: 1. Dimensions: The CR-V is a compact SUV under Honda. The 2010 model has a wheelbase of 2620mm, with length, width, and height measuring 4575mm, 1820mm, and 1680mm respectively. 2. Powertrain: The 2010 CR-V is equipped with two engines: a 2.0-liter naturally aspirated engine and a 2.4-liter naturally aspirated engine. The 2.0-liter naturally aspirated engine delivers 150 horsepower and a maximum torque of 190 Nm. This engine reaches its maximum power at 6200 rpm and its maximum torque at 4200 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 6-speed manual transmission or a 5-speed automatic transmission.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.