How to Reset the Maintenance Light on a 2015 Sagitar?

[Athena]

The method to reset the maintenance light on a 2015 Sagitar: 1. Turn off the ignition switch and shut down the engine. 2. Press and hold the right button (reset/adjust) on the instrument panel. 3. While holding the right button, turn on the ignition switch. 4. Release the right button and press the left menu button once. Following these steps will reset the maintenance cycle indicator to its normal display mode. Below is an introduction to the maintenance light: The maintenance light is a reminder function set by the manufacturer to notify the owner to perform maintenance at certain mileage or time intervals. It appears in the form of an instrument or screen message or indicator light. Resetting the maintenance light means clearing the reminder information after maintenance is completed, essentially resetting the information.

[OColin]

Back when I drove my 2015 Sagitar, the maintenance light was quite annoying. The reset method is simple: First, turn off the car and don’t start the engine. Then, press and hold the reset button on the dashboard—that small circular symbol usually located below the tachometer or speedometer. While holding it, turn the key to the power-on position (equivalent to turning on the electrical system without starting the engine) and wait patiently for about 10 seconds. The maintenance data or a prompt message will appear on the instrument screen, and then you can release the button—the reset is complete. I’ve tried it several times, and it worked every time. This light is a reminder for regular oil changes or inspections, and after resetting, the system recalculates the mileage, so it won’t keep beeping daily. However, before performing the reset, make sure the car is parked on level ground to avoid any accidental issues. If beginners don’t succeed right away, don’t worry—it might be that the button wasn’t pressed correctly or the battery is low on charge. It’s best to check the manual as a backup.

[MalachiMarie]

My 2015 Sagitar has been running for six years, and the maintenance light needs to be reset after every oil change. Here's the specific procedure: After parking and turning off the engine, locate the small reset button on the instrument panel and hold it down. Then turn the key to the ACC position (power on without starting the engine). Keep holding for 15 to 20 seconds while watching for changes on the instrument display. Usually, a "Reset Maintenance" or similar message will appear, at which point you can release the button. It's important to complete the whole process smoothly. I understand this light is based on sensors or timers, and resetting it will make it stop bothering you while driving. Doing it yourself is quite convenient, but first-timers might feel a bit flustered, so I recommend finding a quiet place to operate without distractions. If the light doesn't go off, it might be a minor system glitch - just let the technician handle it during the next maintenance. After all, regular maintenance is crucial for vehicle safety.

[PresleyLee]

The maintenance light on my 2015 Sagitar is on, and learning to reset it is simple. Turn off the engine, press and hold the reset button on the dashboard, turn the power to ON without starting the engine, wait for the display to refresh, then release. This will turn off the light. It's just a reminder tool; if not reset, it will keep flashing, affecting your driving mood. Beginners shouldn't fear failure; just ensure the car is safely parked before attempting.

[SanMaddox]

Experiencing maintenance light issues with a 2015 Sagitar is quite common. Here's how I perform the reset: After turning off the engine, press and hold the reset button on the dashboard, turn the key to the power position without starting the engine, observe the dashboard until prompt characters appear, then release the button to confirm. This method saves the hassle of visiting a repair shop. The maintenance light is designed to prevent excessive wear; if not reset, the persistent light can be distracting while driving. Ensure steady movements during operation and avoid attempting it on a slope. If unsuccessful, it might indicate battery issues or button aging—consider keeping a spare manual in the car or asking a friend for assistance rather than forcing it. Safe driving comes first; handling it yourself when possible saves time and worry.