How to Reset the Maintenance Light on a 2013 Chery Fengyun 2?
3 Answers
Turn off the car's engine. After the engine is off, press and hold the reset button. While holding the reset button, insert the key and start the engine. After the vehicle starts, release the reset button and briefly press the clock adjustment button once. After the reset is complete, you can check the interval mileage until the next maintenance.
Having driven the Fengyun 2 for years, I know the maintenance light routine like the back of my hand. First, sit in the car, insert the key and turn it to the ON position (that’s the one before ignition), but don’t start the engine. Then locate the small button on the dashboard, usually labeled ‘Trip’ or ‘Reset,’ press and hold it while keeping an eye on the maintenance light. After about 3-5 seconds, it should blink or go off—that’s when you release the button. This trick works well for the 2013 model. But a heads-up: resetting the light is just a quick fix. The maintenance light’s real purpose is to remind you to stick to scheduled servicing—don’t ignore it indefinitely. I recommend noting the mileage or setting a phone reminder after each reset to avoid skipping oil changes or filter checks, which are crucial for engine longevity and driving safety. If the light stays on after the reset, check the circuit fuse or battery voltage to rule out minor issues. No rush—take it slow. Proper car maintenance is the key to long-term reliability.
Hey, resetting the maintenance light is a piece of cake. Insert the key and turn it to the ON position without starting the engine. Look for the 'Reset' or similar button on the dashboard, hold it for a few seconds until the light goes out, and you're done. The Fengyun 2's system isn't complicated—manual reset works just fine. As a tech enthusiast, I find automotive electronics fascinating. The maintenance light is essentially an ECU memory clear; after resetting, the system starts counting kilometers from scratch. But don't just focus on resetting the light—remember the actual maintenance tasks like oil changes and brake checks, which should be done regularly for safety. If the button doesn't work, it might be a contact issue; using a diagnostic tool to reset via the OBD port also works. On a related note, while car smart systems are great, don't rely on them too much. Develop a habit of noting maintenance dates yourself—it saves money and hassle. Give it a try; no need to panic.
