How to reset the maintenance light of JAC Shuailing T6?

1 Answers
StephenAnn
07/29/25 9:07am
You can use the universal special diagnostic tool TECH2 to reset it, or manually reset it using the buttons on the right side of the dashboard. Turn off the ignition switch, press and hold both arrow buttons simultaneously, then turn on the ignition switch. After about 3 seconds, release both arrow buttons. The maintenance menu will ask if you want to reset. Press and hold the SET button for more than 3 seconds, press the MODE button, and then turn off the ignition switch to complete the reset. Below is an introduction to the maintenance light: 1. The function of the maintenance light is to record the mileage of important components, similar to a timer in a sprint race, serving as a reminder for car owners and maintenance personnel. 2. If the owner replaces related parts, the corresponding car maintenance light needs to be reset. 3. If the owner replaces related parts but does not reset the light, it will not affect the vehicle's performance, but it will cause trouble for the next replacement of car parts: the exact usage time of the new parts cannot be accurately known.
Was this review help?
15
3
Share
More Forum Discussions

Where to Install a GPS Tracker in a Car?

GPS trackers can be installed in the following locations of a vehicle: A-pillar, B-pillar, or C-pillar; inside the engine compartment; around the dashboard; under the seats; inside the trunk; concealed under the front windshield trim panel; under the rear windshield trim panel; or inside the front bumper. Below is some information about GPS: 1. Introduction: GPS is a global positioning system, a high-precision radio navigation system based on artificial earth satellites, capable of providing accurate geographic location, vehicle speed, and precise time information anywhere on Earth and in near-Earth space. 2. Positioning Principle: GPS positioning includes pseudo-range single-point positioning, carrier phase positioning, and real-time differential positioning. 3. Components: The global positioning system consists of three parts: the space segment (GPS satellites), the ground control segment, and the user segment.
10
3
Share

What to Do When a Car is Scrapped?

The "Administrative Measures for the Recycling of Scrapped Motor Vehicles" stipulates in Articles 10 and 12 that the unit or individual owning a scrapped vehicle should promptly apply to the public security authority for the vehicle's scrapping procedures and sell the scrapped vehicle to a qualified recycling enterprise. It is prohibited for any unit or individual to sell, gift, or otherwise transfer a scrapped vehicle to any entity or individual not authorized for scrapped vehicle recycling, or to dismantle the vehicle themselves. Below are the specific steps for scrapping a vehicle: 1. Prepare the required documents for the scrapping procedure: These include the "Motor Vehicle Registration Form (Appendix)", "Application Form for Motor Vehicle Suspension, Resumption/ Cancellation of Registration", "Motor Vehicle Registration Certificate" (if not already obtained), and the vehicle's license. 2. Apply to the public security authority: The owner of the scrapped vehicle should promptly apply to the public security authority and complete the scrapping procedures. On the day of acceptance, the public security authority will issue the "Motor Vehicle Scrapping Certificate" to the owner and instruct them to sell the scrapped vehicle to a qualified recycling enterprise.
16
4
Share

How long does it take to upgrade to an A1 license?

Upgrading to an A1 license varies by region, generally taking three to five months. Below is a brief introduction: 1. Local upgrade: To upgrade your driver's license locally, you need to pay at a driving school, learn to drive, and take the test. Fees vary by region, and the learning period is typically 2 months. 2. Non-local upgrade: You cannot upgrade your license in a non-local area; it must be done in the jurisdiction where your driver's license is registered. If you wish to upgrade in a non-local area, you must transfer your household registration to that area and hold an ID card from the registered jurisdiction to meet the local upgrade requirements. The following situations disqualify you from upgrading to an A1 license: (1) Having a record of drunk driving during the current scoring cycle and the three most recent consecutive scoring cycles before application. (2) Speeding over 50% during the current scoring cycle and the three most recent consecutive scoring cycles before application, without having your license revoked. (3) Causing casualties in a traffic accident and being fully or primarily responsible.
9
2
Share

What is the recommended speed during the motorcycle break-in period?

During the break-in period, the speed should be maintained between 50-80 km/h. Below is relevant information about the break-in period: 1. Concept: The break-in period generally refers to the process of contact, friction, and meshing of mechanical components during initial operation. 2. Precautions: During cold starts, it's best to wait until the water temperature preheats to above 40°C before moving off. When starting, gently press and slowly release the clutch and accelerator pedal, and choose good road conditions for driving. Avoid revving the engine when parking. For vehicles in the break-in period, it's essential to control the driving speed properly – avoid excessively high speeds, with the recommended speed range being 50~80 km/h.
5
3
Share

How to calibrate the Senova X35 SAS?

Senova X35 SAS is calibrated using professional equipment. Below is a related introduction to the Senova X35: 1. Exterior: The Senova X35 is a compact family SUV launched by the Senova brand under Beijing Automotive. Its body dimensions are 4300*1815*1640mm, with a wheelbase of 2570mm. 2. Powertrain: The Senova X35 is only equipped with a 1.5L engine, codenamed A151, which delivers a maximum power of 116 horsepower and a peak torque of 148 N·m. In addition to the 5-speed manual transmission, it also offers an Aisin 4AT transmission.
19
5
Share

What Causes Sudden Loss of Power While Driving?

Possible causes include issues with the car's alternator, or problems in the fuel supply and ignition systems affecting performance. Reduced engine power may also result from carbon buildup in the engine. Carbon deposits can occur in various components, such as cylinder carbon buildup, throttle valve carbon buildup, spark plug carbon buildup, and intake carbon buildup—all of which can impact engine performance. Below is a detailed breakdown: 1. Excessive Carbon Buildup: When there is too much carbon buildup inside the engine, the car's ignition timing may become misaligned, and the engine's air intake efficiency may decrease, ultimately leading to reduced power. The car may exhibit symptoms like weak idling and, in severe cases, engine shaking. 2. Poor-Quality Gasoline: Fuel system malfunctions can arise from using low-quality gasoline, which reduces engine power. If the car requires 95-octane fuel, it must use 95-octane gasoline as this is the minimum standard. Another possible cause is a clogged fuel tank vent, which restricts fuel supply, leading to an overly lean air-fuel mixture in the engine and reduced efficiency. 3. Insufficient Fluid Levels: Low engine oil or insufficient coolant can increase engine load and impair cooling performance, not only reducing power but also increasing fuel consumption.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.