How to reset the immediate maintenance reminder on Volkswagen vehicles?
2 Answers
Turn off the engine, press and hold the trip odometer reset button located below the tachometer; Turn the ignition to ON position, release the trip odometer reset button, the SERVICE indicator will appear; Pull out the minute button on the clock and turn it clockwise to display the mileage; Turn off the engine to reset the reminder message, then turn the ignition to ON position again and the SERVICE indicator will disappear. Here is more information about vehicle maintenance: 1. According to Volkswagen's original German factory requirements, gasoline models should undergo oil change maintenance every year or 15,000 km (whichever comes first), and inspection maintenance every year or 30,000 km (whichever comes first). 2. Although the domestic maintenance manual suggests maintenance intervals of 10,000 km after the first service, dealers generally recommend not exceeding 7,500 km between services. Since most Volkswagen models require a major service at 15,000 km after the first 7,500 km service, but the interval between 7,500 km and 15,000 km is too long, it's recommended to split this period by performing maintenance at 7,500 km (midway point). The most appropriate maintenance window is between 5,000 km and 7,500 km.
I've been driving a Volkswagen for several years and often encounter the 'Service Now' prompt on the dashboard. The first time I saw it, I panicked, thinking something major was wrong. Later, I learned a simple method: first park the car in a safe place, turn off the engine but leave the key in the ON position so the dashboard remains lit; then press and hold the small button that displays the mileage for about ten seconds or until the 'Service' message disappears. The steps may vary for different models—for example, my Passat's button is at the bottom left of the dashboard, while a Golf's might be near the steering wheel. However, don’t just clear the prompt and forget to actually take the car in for maintenance. The reminder is there to prevent engine overheating or oil issues. If you’re unfamiliar with the process, it’s safer to check the owner’s manual or ask a mechanic friend.
