How to Reset the h6 Maintenance Reminder?

[DeBenjamin]

h6 maintenance light reset method is as follows: 1. Turn off the ignition switch. 2. Press and hold the trip meter reset button on the instrument panel. 3. Then turn on the ignition switch, at which point the odometer display will start counting down. When the display shows 0000.0, release the button to reset the maintenance light. Below is the maintenance light reset method for the older Haval h6 model: 1. Turn off the key and press and hold the button at the bottom right of the instrument panel. 2. Turn the key to the position where all instrument lights are on, and you will notice that the small wrench icon on the instrument panel stops flashing. 3. Release the button, then press the button at the bottom left of the instrument panel, and you will see the small wrench icon disappear. 4. The reset is complete.

[SanCaden]

I remember resetting the maintenance reminder light on my Haval H6 was quite simple, and I often did it myself. First, turn the car key to the ON position without starting the engine—otherwise, the reset won't work. Then locate the small button on the steering wheel, some call it the "Trip" button, and hold it down for 5 to 10 seconds. You'll see the maintenance icon on the dashboard flash a few times before disappearing. Why reset it? Because it tracks your maintenance mileage—if not reset, it might give false reminders, lighting up prematurely next time, causing unnecessary worry and wasted money. After resetting, it's best to start the car and drive around to confirm the light is truly off. If unsuccessful, check the car battery's charge level—too low, and it might affect the operation. Alternatively, visit a 4S shop for a free fix, which takes just minutes. Regular resets help track the vehicle's health—I've driven this car for three years, reset it several times, and never had issues.

[SanKatherine]

When it comes to resetting the maintenance reminder for the Haval H6, as a DIY enthusiast, I'd like to share some experience. Essentially, resetting means restarting the vehicle's maintenance timer. You need to follow standard steps: turn off the engine, switch the key to ACC or ON position. Then use the steering wheel control buttons, usually there's a menu button or OK button, navigate to the instrument menu, find the "Maintenance" option, press and hold the select button for a few seconds until the prompt clears. Different year models of H6 may vary, my 2018 model has a few more steps than the newer ones, so it's advisable to check the owner's manual first for confirmation. After resetting, the system will restart mileage counting, avoiding false alarms. Extra tips: ensure the electrical system is stable during operation, if the dashboard lights don't respond, it might be a fuse or circuit issue, don't force it and seek professional help in such cases. Resetting has many benefits, helping you maintain the car's condition and extend its lifespan. Learning this small trick saves you time and money by doing it yourself.

[AmyAnn]

I just reset the maintenance reminder on my Haval H6, and it was pretty easy. First, turn the key to the ON position without starting the engine. Then, find a button on the steering wheel, like Trip or OK, and hold it for about 5 seconds until the maintenance light goes off. Why reset it? It's like a little alarm reminding you to service your car. If you don't reset it, the constant reminder can be annoying and misleading. If the operation fails, don't worry: double-check if you did it correctly, or go to the shop for a computer reset—it's quick. After resetting, just check if the dashboard is normal, and that's it. Keep it simple.

[StEdward]

I think the maintenance reminder reset for the Haval H6 is crucial for driving peace of mind, so the operation needs to be careful. After turning off the engine, turn the key to the ON position, but do not start the car. Then press the steering wheel button, usually the Trip button, and hold it for more than 8 seconds until the icon disappears. Before resetting, make sure the maintenance has indeed been completed; otherwise, the system may misjudge. If the reset fails, it might be due to poor button contact or low voltage—try charging the battery first. Once the light goes off after resetting, you can drive with confidence, reducing the risk of sudden malfunctions. This feature is thoughtfully designed to save you money and hassle.