How to Reset the Golf Tire Pressure Light?

1 Answers
ZaneDella
07/30/25 4:31am
Golf tire pressure light reset method: 1. Start the vehicle to light up the center console screen, click the "CAR" button; 2. Find "Tire" on the center console screen and click to enter the next step of settings; 3. Click the "SET" button, after entering the next step of settings, click the "Confirm" button; 4. The center console screen displays "Tire Pressure Monitoring Initialization", which means the Golf tire pressure has been reset. The Golf is a classic hatchback compact family car launched by FAW-Volkswagen. In terms of body dimensions, it has a length, width, and height of 4199mm, 1786mm, and 1479mm respectively, with a wheelbase of 2578mm.
Was this review help?
5
3
Share
More Forum Discussions

Where is the oil-water separator located in a car?

The oil-water separator is generally installed at the lowest point of the pipeline or at the working inlet (with the oil filter in front, followed by the water filter). When compressed air containing a large amount of oil, water, and solid impurities enters the separator, it swirls downward along the inner wall. The resulting centrifugal force separates the oil and water from the air stream, causing them to flow downward along the wall to the bottom of the oil-water separator. The oil is then finely filtered by the filter element. Relevant information about engine oil is as follows: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber in the engine. It is often referred to as the 'blood' of a car. 2. Composition: Engine oil consists of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while the additives compensate for and improve the shortcomings of the base oil, imparting new characteristics. Additives are an essential part of the lubricant.
13
1
Share

What is the English logo of the Tayron?

The English logo of the Tayron is TAYRON. Below is a related introduction to the Tayron: 1. Exterior Design: The Tayron is an SUV model under FAW-Volkswagen. It is based on the European version of the Tiguan and comes from the Volkswagen MQB A2 platform. In terms of appearance, the Tayron adopts Volkswagen's new family-style design language, which has gradually been introduced in several new models under the Volkswagen brand. Compared to the previous Volkswagen family design, the Tayron appears more youthful and stylish. The front face features a horizontal grille, paired with LED headlights on both sides, effectively extending the horizontal visual width. The waistline extends from the headlights to the rear taillights, and the rear design is rounded and bold, with the vehicle's robust lines creating a muscular feel. 2. Configuration: In addition to conventional features such as a 360° panoramic camera, the third-generation intelligent parking assist system, and blind spot detection, the Tayron is also equipped with the TJA traffic jam assist system. Through the combination of ACC 3.0 adaptive cruise and Lane Assist lane keeping, it achieves L2-level autonomous driving functionality, significantly reducing driver fatigue. The vehicle is equipped with the 4MOTION intelligent four-wheel drive system, allowing seamless switching between 4 road modes, 2 off-road modes, and 1 snow mode.
2
4
Share

Can You Still Drive When the Water-Fuel Separator Alarm Goes Off?

When the water-fuel separator alarm is triggered, the cause should be investigated. If it's due to water accumulation, you can continue driving, but for other reasons, repairs are needed before driving. Reasons for the water-fuel separator alarm: Flashing state: The water-fuel separator is installed on a bracket near the fuel tank of the car. It separates water from fuel by utilizing the density difference between water and oil, filtering moisture from the fuel. When the moisture content in the fuel filter exceeds the limit, the water-fuel separator cannot function properly. Steady light state: A malfunction in the sensors related to the water-fuel separator causes it to stop operating due to the inability to transmit the working status normally. A faulty water-fuel separator prevents the proper removal of water during fuel combustion, which can easily lead to abnormal operation of the fuel injectors. This may result in unstable engine acceleration, lack of power, black smoke emissions, white smoke from the engine, and severe carbon buildup. Solutions: When the water-fuel separator warning light is on, you can open the drain valve under the separator's liquid storage tank to release the water. As the liquid level drops below the sensor, the indicator light will naturally turn off. If the warning light remains on after draining the water from the storage tank, the issue might lie with the water-fuel separator sensor. Use a multimeter to check the sensor's voltage, which should normally be 12V and 5V. If abnormal, and after confirming it's not a wiring or connection issue, replace the water-fuel separator sensor.
19
2
Share

Can You Still Drive with a Leaking Fuel Tank?

It is not advisable to continue driving if your car is leaking fuel. Continuing to drive with a fuel leak can damage related components, pose significant safety hazards, potentially lead to accidents, and affect the vehicle's lifespan and durability. Relevant information about gasoline is as follows: 1. Introduction: Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained from the distillation and cracking of petroleum, used as fuel. It appears as a transparent liquid, is flammable, and has a distillation range of 30°C to 220°C. 2. Key Characteristics: The important characteristics of gasoline include volatility, stability, anti-knock properties, corrosiveness, and cleanliness.
1
2
Share

Can a Spare Key Start the Engine?

Spare keys can start the engine. Here is additional information: 1. Each vehicle is typically equipped with two keys - one primary key and one spare key. Although there is a primary-secondary distinction, both keys have identical functionality and can start the vehicle. 2. Some brands' spare keys may be simpler in design compared to the primary key. Regardless of any physical differences between the two keys, they share the same operational capabilities - either key can start the vehicle and lock the doors. 3. A spare key should not replace a smart key for long-term use. It's important to restore the original key's functionality as soon as possible.
1
0
Share

How to Turn Off the Automatic Air Conditioning in an Audi Q5?

Audi Q5's automatic air conditioning can generally be turned off in two ways, as follows: 1. Press the ignition switch after starting the engine while keeping your foot on the brake. 2. Turn off the automatic mode, i.e., 'auto', then adjust the fan speed to zero and switch to manual mode, i.e., 'manual'. Typically, high-end air conditioning systems operate on the principle of simultaneous heating and cooling to maintain a comfortable temperature inside the vehicle, avoiding extremes of cold or heat, but this requires higher fuel consumption. Mid to low-end automatic air conditioning systems only allow setting the interior temperature, with fuel consumption similar to conventional air conditioning systems, albeit slightly more fuel-efficient.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.