···
Log in / Register

How to reset the fuel gauge after refueling?

1Answers
LaEmmett
07/28/2025, 05:18:52 AM

After refueling, the fuel gauge can be reset by pressing the "Return" button on the right side of the steering wheel and then selecting "Maintenance"—"Reset" in the settings. Below is some extended knowledge about refueling. 1. Refueling time: It is best to refuel when the remaining fuel is about 1/4 of the tank. When the yellow light comes on, there is still a certain amount of fuel left in the car. Generally, this is the time to refuel, but it is better to do so before the yellow light comes on. 2. Safe refueling: After deciding to refuel, the car should follow the road into the gas station and must not stop at the entrance. Once inside, park near an unoccupied fuel pump to ensure a safe distance. Remember to roll down the window and then turn off the engine.

Was this review help?
113
Share
More Q&A

What causes the Chevrolet Cruze to shake when the air conditioning is turned on?

The reasons why the Chevrolet Cruze shakes when the air conditioning is turned on are as follows: 1. Dirty throttle body: This affects the engine. If the air conditioning is turned on at this time, it will increase the engine idle speed, resulting in steering wheel shaking. 2. Carbon buildup in the throttle body: If the throttle body has not been maintained for a long time, carbon buildup can easily occur, which obstructs the engine's air intake, causing the engine to barely or insufficiently power the compressor, leading to idle shaking. The solution is to clean the throttle body. If the driving environment is harsh, it is best to clean it regularly, recommended every 10,000 kilometers.
112
Share

What brand is the future car?

Currently, there is no 'future' car brand; it should be NIO, a global intelligent electric vehicle brand established in November 2014. Its main products include the NIO ES6, NIO ES8, NIO EC6, NIO EVE, and NIO EP9. The NIO ES8 is an electric SUV positioned in the rapidly growing 7-seat SUV market, featuring a seating layout of 2+3+2 for the seven-seat version and 2+2+2 for the six-seat version. The vehicle is over 5 meters long with a wheelbase exceeding 3 meters. It adopts NIO's family design language, including the XBar front face and 'heartbeat curve' LED taillights, and supports battery swapping, offering users an energy replenishment experience superior to refueling traditional fuel vehicles.
112
Share

Can antifreeze and water be mixed together for use?

Antifreeze and water can be mixed together for use, but long-term use of antifreeze diluted with water can cause significant harm to the car. Adding water to antifreeze lowers its boiling point. The boiling point of water is 100 degrees Celsius, while antifreeze typically has a boiling point above 110 degrees Celsius. When water is added to antifreeze, it dilutes the antifreeze, thereby reducing its boiling point accordingly. This can lead to the phenomenon of the coolant boiling over. Additionally, adding water to antifreeze diminishes its rust and corrosion prevention properties. Antifreeze's ability to prevent rust and corrosion is due to certain additives it contains. When water is added to antifreeze, the effectiveness of these additives in preventing rust and corrosion decreases. This can result in the formation of scale inside the radiator or corrosion of the radiator, leading to coolant leakage or seepage.
102
Share

How to turn on the low beam headlights of Volkswagen Polo?

Method to turn on the low beam headlights of Volkswagen Polo: Rotate the light switch clockwise by two gears. At this time, the low beam headlights in front of the car will illuminate on the basis of the small lights, which can illuminate the road in front of the car for about ten meters. The illumination angle is low, which will not dazzle the drivers and pedestrians opposite. It is recommended to use low beam headlights in most cases at night. Turn them on when it is dark, whether at night or in bad weather. The size of Volkswagen Polo is 4053mm in length, 1740mm in width, 1449mm in height, and the wheelbase reaches 2564mm. This car adopts a new family-style design concept, with a flat front grille and horizontal chrome trim strips for decoration, making the front face look more refined.
110
Share

How deep does a tire scratch need to be before replacement?

Tire replacement depends on the depth of the scratch: 1. If the steel cord ply is exposed, immediate replacement is necessary; 2. Even if only the steel cord ply is visible, replacement is recommended for driving safety; 3. If the scratch on the tire tread is shallow, affecting only a small portion of the surface, and the vehicle is mostly driven in urban areas, a simple tire repair may suffice. Solutions for tread scratches: 1. If the damage is minor and doesn't affect usage, regularly check for cracks, accelerated wear, or bulges near the scratched area—replace the tire if these signs appear; 2. If the front tire is damaged, consider swapping it with a rear tire for better safety in case of a blowout; 3. It's advisable to have the tire inspected by professionals at a specialized tire repair shop and follow their recommendations.
108
Share

What are the solutions for failing emission tests?

The solutions for failing emission tests are: 1. Accurately determine the cause of exceeding the standard based on the steady-state simplified working condition test values of the exhaust. If the test value is above NO1000, the cause is catalytic converter poisoning. If the test value is NO2000, the cause is catalytic converter failure; 2. If the catalytic converter has failed, further determine whether it is reversible or irreversible failure; 3. Reversible catalytic converter failure can be resolved by using catalytic converter regeneration products for regeneration maintenance. If the vehicle has been driven for more than 100,000 kilometers, it is recommended to also perform catalytic converter cleaning maintenance; 4. Irreversible catalytic converter failure requires replacement of the catalytic converter, and it must be replaced with an original equipment manufacturer (OEM) part.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.