How to Reset the Chery Maintenance Wrench?

[RyanLynn]

Chery maintenance wrench reset method: Press the toggle button on the multifunction steering wheel, then insert the key to power on the vehicle, restart the engine, and the maintenance reminder will be reset. The small wrench light is a maintenance reminder indicator, a feature found in many vehicles to alert owners to perform timely maintenance. Chery is a state-controlled enterprise engaged in automobile production, established on January 8, 1997, headquartered in Wuhu City, Anhui Province. Chery currently operates four sub-brands: Chery, Karry, Rely, and Riich, covering the fields of family cars, micro vehicles, commercial vehicles, and high-end brands. Under the passenger car brand, Chery has launched dozens of vehicle models into the market, including QQ3, QQ6, A1, A5, A3, Tiggo 3, Eastar, Eastar Cross, and Fulwin.

[JoyDella]

I remember the wrench light was quite annoying after the last service, but it’s actually not hard to clear it yourself. First, make sure the car is turned off, then locate the small button on the dashboard—usually the mileage reset button. Hold it down without releasing, then turn the key to the ON position (where the dashboard lights up but don’t start the engine). Watch the screen; typically, after about five or six seconds, the wrench icon will disappear. Release the button immediately, and you’re done. The procedure may vary slightly for different models. For example, my Arrizo 5 works this way, but some Tiggo models require using the steering wheel menu. If you’ve tried two or three times without success, it might be due to a faulty button contact or a program issue. To be safe, it’s better to visit the 4S店 and have them clear it with their computer, while also checking the service records.

[ArcherFitz]

Last time I cleared the maintenance reminder myself, I found the steps simple but error-prone. First, park the car and turn off the engine, then press and hold the small button on the dashboard without releasing it, and turn the key to the power-on position, being careful not to press the brake to start the engine. Keep an eye on the dashboard and time it; after about seven or eight seconds, the wrench icon will flash and disappear. Don't let go during this process—I once released it too early and had to start over. If you can't find the button, check the back of the owner's manual for diagrams. For newer models like the Tiggo 8, you might need to use the steering wheel control buttons to access the settings menu, but the principle is the same. If you really can't figure it out, don't force it—just drive to the repair shop, and they'll fix it in a few minutes. After all, clearing the maintenance reminder ensures you can do the next service on time.

[StJohn]

To clear the maintenance wrench symbol, follow these three steps: After turning off the engine, hold the dashboard reset button, turn the key to the ON position without starting the engine, and hold for several seconds until the wrench disappears. In practice, details are often overlooked – for instance, pressing for less than five seconds may cause failure, or accidentally starting the engine interrupts the process. Some models require specific button combinations, so checking the manual to confirm positions is recommended. If the operation fails, avoid repeated attempts to prevent damaging the dashboard circuits; instead, directly contact a 4S shop for professional equipment reset. Additionally, regular maintenance can prevent this issue from occurring frequently.

[SanRebecca]

The wrench indicator is a reminder to change the engine oil. After clearing it, remember to set the next maintenance date. When performing the operation, make sure the car is completely turned off. Locate the mileage button near the steering wheel and hold it down, then turn the key to the power-on position. The icon should disappear within about 10 seconds. The first time I tried it, I pressed too lightly and it didn’t work, but later I realized you need to press firmly all the way down for it to take effect. For newer models, the setting might be in the central control screen menu. If unsure, take a photo of the dashboard and ask the after-sales service. After clearing, pay attention to the maintenance schedule to ensure timely oil and filter changes for engine protection.

[LaMadison]

Don't panic when you see the maintenance wrench icon, it can usually be reset manually. After fully turning off the engine, press and hold the dashboard reset button while turning the key to the ON position. Keep your finger pressed until the wrench icon disappears - this trick works for my old QQ model. For newer vehicles, you may need to access the system menu to select the reset option. If DIY reset fails, it could indicate button malfunction or system errors - a professional can fix it in seconds with a diagnostic tool. Regular maintenance as per the manual helps prevent this issue, as timely servicing is crucial for engine longevity.