How to Reset the C5 Maintenance Light?

1 Answers
Janelle
07/25/25 4:34am
Maintenance light reset steps are divided into four steps: 1. First, turn off the ignition switch. 2. Press the single trip meter reset button on the car dashboard. 3. Turn on the ignition switch. 4. The vehicle's odometer will automatically count down. When the display shows 0000.0, immediately release the button to complete the reset. Here is some related information about the maintenance light oillife: 1. Oillife refers to the remaining life of the engine oil, and the percentage following oillife indicates the specific remaining life value. 2. When the value drops to around 30%, the oillife light will automatically illuminate, prompting the owner to replace the engine oil promptly. 3. After the owner performs vehicle maintenance, the maintenance light oillife can be reset. After resetting, it will start a new cycle of maintenance time or mileage calculation.
Was this review help?
20
5
Share
More Forum Discussions

What causes oil leakage from tires?

Possible causes include brake fluid leakage or abnormal shock absorber system with oil leakage. Preventive measures for vehicle oil leakage: 1. Pay attention to the role of gaskets: The gaskets between components in static parts of the vehicle (such as joint surfaces, end covers, housings, cover pads, flat enamel covers, etc.) play a sealing and leak-proof role. If the material, manufacturing quality, or installation does not meet technical specifications, they will fail to provide leak-proof sealing and may even cause accidents. 2. Tighten nuts according to the specified torque: If too loose, the gasket won't be compressed tightly and may leak; if too tight, it may cause the surrounding metal to bulge or the threads to strip, leading to oil leakage. Additionally, if the oil pan drain plug is not tightened or becomes loose and falls off, it can easily cause oil loss, leading to severe engine damage such as "bearing seizure and crankshaft damage."
8
1
Share

How to Verify Green Channel on Highways Without Vehicle License?

Without a vehicle license, you cannot verify the green channel on highways. The vehicle license is a document that proves the vehicle's eligibility to operate. Driving a vehicle without carrying the vehicle license will result in the traffic police impounding the vehicle, notifying the party to complete the reissuance procedures, and imposing a warning or a fine ranging from 20 to 200 yuan. Documents required for reissuing the vehicle license: 1. "Application Form for Replacement or Reissue of Motor Vehicle License Plates and Certificates"; 2. Identity proof of the vehicle owner; 3. Proof of vehicle origin such as the purchase invoice; 4. Whole vehicle factory qualification certificate or import certificate for imported vehicles; 5. Vehicle purchase tax payment certificate or tax exemption certificate; 6. Compulsory traffic accident liability insurance certificate for motor vehicles; 7. Other proofs and certificates required by laws and administrative regulations during motor vehicle registration.
18
4
Share

What are the classification standards for mini, medium, and large vans?

The following is an introduction to the classification standards for mini, medium, and large vans: 1. Basis: The classification of truck models is based on vehicle dimensions. 2. Mini van and medium van classification: The reference dimension for distinguishing between mini vans and medium vans is the overall length. A vehicle with an overall length ≥4.80 meters is classified as a medium van, while those less than 4.8 meters are classified as mini vans. 3. Mini truck and medium truck classification: The reference dimension for distinguishing between mini trucks and medium trucks is the cargo box length. A cargo box length ≥3.8 meters is classified as a medium truck, while those less than 3.8 meters are classified as mini trucks. 4. Classification by seating capacity: 7 seats and below are classified as micro; 12 seats and below as medium; 13 seats and above as large.
2
2
Share

What is the size of the Mazda CX-4 front windshield?

The size of the Mazda CX-4 front windshield is 5145*80cm. The following are the functions of the windshield: 1. Differentiation: The car's windshield is placed vertically, like a large plane mirror, which will image the passengers inside the car in front of the vehicle, hindering the driver from seeing pedestrians on the road and easily causing illusions. When the car's windshield is installed at an angle, the reflection of the passengers inside the car through the front windshield is imaged above the front of the car, while pedestrians on the road are in front of the car, allowing the driver to distinguish between the passengers inside the car and pedestrians on the road. 2. Safety: Tempered glass is another type of safety glass, widely used in modern cars for side and rear windows. Compared to laminated glass, tempered glass increases its strength through heating and pressurization. When damaged, it shatters into smooth, small particles like breadcrumbs, reducing the possibility of injury from glass fragments.
3
3
Share

What is the Small Car Incremental Quota?

Small car incremental quota refers to the additional quantity of passenger vehicles added on the basis of the existing ones. Below is more relevant information: 1. Application procedure for incremental quota: Select the type of incremental quota and allocation method, then obtain an application code. After qualification review, confirm the application code as valid. With the valid code, obtain the incremental quota through lottery or bidding. 2. Notes: Individuals can only obtain one application code. Each code can only correspond to one type of incremental quota and one allocation method per allocation period. If individuals or units need to change the type of incremental quota application or allocation method, they should cancel the original application and reapply. To cancel or withdraw an incremental quota allocation application, it must be submitted before the specified date of the quota allocation.
1
0
Share

Is it necessary to install a reversing radar?

It is necessary to install a reversing radar. Here are some relevant introductions about reversing radars: 1. Working principle: The PDC system works by usually installing radar detectors on the rear bumper or both front and rear bumpers of the car to detect obstacles in front and behind, helping the driver "see" obstacles in front and behind, or the distance from other cars when parking. In addition to facilitating parking, this device can also protect the car body from scratches. 2. Function: When reversing, it helps the driver "see" things that are not visible in the rearview mirror, informing the driver of the surrounding obstacles through sound or more intuitive display, relieving the troubles caused by the driver looking around when parking, reversing, and starting the vehicle, and helping the driver eliminate blind spots and blurred vision, improving driving safety.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.