Browse

Antiques Collectibles Apparel Baby Kids Items Books， Movies And Music Electronics Free Stuff Garden Outdoor Health Beauty Home Goods Home Improvement Supplies Musical Instruments Office Supplies Pet Supplies Sporting Goods Ticket Toys Games Transportation Others

Used Cars New Cars Others

Business Crafts Design And Web Events Home Improvement Legal Lessons Personal Pets Photography Repair And Technical Support Wellness Writing， Translation， And Transcription Others

Activities & Groups Artists & Musicians Classes & Lessons Events Friendship & Networking Lost & Found Rideshare Sports Teams Volunteers Travel & Travel Partners Skills & Language Swap Other

How to Reset the Airbag Warning Light on Volkswagen Lavida?

1 Answers

LawsonRose

07/29/25 5:36pm

The user needs to drive the car to an auto repair shop and use a professional diagnostic scanner to clear the fault code. Relevant details are as follows: 1. Poor Contact: One of the connectors in the airbag system may be disconnected or have poor contact, which is the most common issue. Check the connection status of all connectors (yellow connectors), and reconnect each one. It is recommended to wrap a layer of black tape around the connectors for reinforcement. If additional electrical devices have been installed or the steering wheel has been disassembled, pay special attention to the connection of these connectors. 2. Loose Ground Wire: There may be a loose ground wire somewhere in the car. Inspect the contact condition of all ground wires. Since poor contact may not be visible to the naked eye, the best approach is to tighten all ground connections. Other possible causes include faults in components such as the crash sensor or airbag control module, which may require replacement of the relevant parts.

Was this review help?

2

5

Share

More Forum Discussions

How to Open a 4S Store?

First, the qualifications and legal business credentials of the operator are preliminarily reviewed, with preference given to those with relevant experience. The operator must have a good commercial reputation. The can be downloaded from the official website of the automobile brand manufacturer. The manufacturer will conduct an initial screening based on the application materials and carry out on-site inspections. The operator must strictly adhere to the "Four-in-One" franchise model and cannot operate beyond the authorized scope. The manufacturer authorizes the franchise store for sales and maintenance.

What are the symptoms of a faulty car engine ignition coil?

Ignition coil failure symptoms: Generally, the number of ignition coils corresponds to the number of cylinders in the engine. If an ignition coil is severely damaged, causing insufficient spark from the spark plug to ignite the air-fuel mixture or complete absence of spark, the engine will experience a misfire. The specific symptom is engine shaking: Due to the imbalance in power generation caused by the misfire, the engine will exhibit severe vibrations during operation. If there are too many misfiring cylinders or two adjacent power-generating cylinders misfire simultaneously, the engine is highly likely to fail to start normally.

How to Know the Production Date of a Tire?

The production date of a car tire is generally represented by a four-digit number, where the first two digits indicate the production week and the last two digits represent the production year. Here is the relevant information: 1. The production date of a car tire is part of a series of alphanumeric characters starting with DOT, which stands for U.S. Department of Transportation certification. 2. The following numbers and letters represent the tire's origin information and factory code. 3. The last four digits indicate the production date. 4. Generally, the maximum speed on highways is controlled at 120 km/h, but as tires are continuously used, their load-bearing capacity weakens, and changes in road temperature can also reduce the maximum speed rating. Therefore, manufacturers equip tires with a speed rating several levels higher than the 120 km/h limit to ensure vehicle safety.

What is the ground clearance of the Equinox?

The minimum ground clearance of the Equinox when unloaded is 199 mm, and when fully loaded, it is 170 mm. More details about the Equinox's ground clearance are as follows: 1. Minimum ground clearance: Refers to the distance from the lowest point of the chassis to the ground when the vehicle is fully loaded. The Equinox has an approach angle of 24 degrees and a departure angle of 19.2 degrees. 2. Ground clearance reflects the vehicle's ability to pass over obstacles or uneven surfaces without collision: The greater the ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven surfaces; the smaller the ground clearance, the weaker this ability. 3. The ground clearance of the new Equinox has become smaller: The new Equinox features a front MacPherson strut and rear multi-link suspension combination, with an approach angle of 19°, a departure angle of 23°, and a minimum ground clearance of 158 mm.

What is the ground clearance of the Honda CRV?

Honda CRV's minimum ground clearance when fully loaded is 135mm, and the ground clearance when unloaded is 185mm. Here is some relevant information: 1. Minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the road surface when the car is fully loaded. It indicates the car's ability to overcome obstacles (such as stones, etc.). The smaller the ground clearance, the worse the ability to overcome obstacles. 2. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability.

Do you need to press the brake when shifting from D to N?

Shifting from D to N does not require pressing the brake. The situations where you need to press the brake when shifting between gears are as follows: 1. From P to R and R to P, you must press the shift lock and brake. 2. From R to N, you do not need to press the shift lock or brake. 3. From N to R, you must press the shift lock and brake. 4. From N to D, you must press the shift lock and brake. 5. From D to S, you must press the shift lock but do not need to release the throttle or brake. 6. From S to D, you can simply push the lever without releasing the throttle or braking. 7. From D to D (+ or -), you do not need to release the throttle, brake, or press the shift lock; simply shift directly. After shifting, it will directly correspond to the D gear position.

Trending Ranking

Where is the Bluetooth in Older BYD Models

What Causes Oil Leakage Inside the Engine?

What are the must-have insurances for small cars?

Can I still renew my vehicle license if it has been expired for over a year?

What brand is the audio system in the Cadillac XT4?

Why is the air conditioning in the Magotan not cooling?

How to Determine Diesel Turbocharger Damage?

How to Turn On the Interior and Exterior Circulation in a Passat?

What are the maintenance items for a car at 70,000 kilometers?

Is a Cold Tire Pressure of 2.0 Normal in Summer?

More Forum Discussions

How to Transfer Vehicle Registration to Another Location?

What causes the steering wheel warning light to illuminate in a vehicle?

How to Tighten the Handbrake of a Small Car?

What to Do When You Can't See the Front of Your Car While Driving?

Help

Cookie

Cookie Settings

© 2025 Servanan International Pte. Ltd.