How to reset the air conditioning filter after replacement on Roewe RX5?

2 Answers
DanielMarie
08/28/25 2:14am
After replacing the air conditioning filter on the Roewe RX5, it is recommended to go to a repair shop or 4S store for professional operation to avoid operational errors that may affect the normal use of the air conditioning system. The air conditioning filter can prevent external impurities from entering and affecting the air quality inside the car. The air conditioning filter should be replaced approximately every 5,000 kilometers. The Roewe RX5 is an internet SUV that adopts the "Blue Core" high-efficiency power technology, equipped with 2.0T and 1.5T in-cylinder direct injection turbocharged engines. The Roewe RX5 features Porsche chassis tuning, GKN intelligent all-wheel drive system with the same origin as Land Rover, full independent suspension system, and four-way full-speed CANBUS system bus, comprehensively improving the driving and riding quality.
Was this review help?
6
2
Share
Liam
09/09/25 7:41am
Resetting the air filter after replacing it on the Roewe RX5 is actually super simple, I must say this job can be done in just a minute. First, get in the car without starting the engine, turn the key to the ACC position, and you'll see the dashboard light up. Then, use the OK button on the left side of the steering wheel to navigate into the vehicle information menu, find the maintenance option in the settings, select the air filter or air filter reset, and confirm. The system will automatically reset the next reminder time. If you don't do this, those reminder lights will act up, popping up even though you just replaced it, making you misjudge the actual lifespan. I usually replace the filter every six months or 10,000 kilometers, and after resetting, the reminders are much more accurate, especially when driving in cities with poor air quality. Frequent replacement and resetting ensure strong airflow from the AC and no odors in the car. Developing the habit of resetting saves electricity for the AC pump and extends its lifespan, killing multiple birds with one stone.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

What documents are required for replacing or renewing a driver's license?

To replace or renew a driver's license, you need to provide the "Motor Vehicle Driver's License Application Form," the original and a copy of the driver's ID card, a physical examination form from a hospital at or above the county level, and three one-inch white-background color photos. The validity periods for driver's licenses are as follows: 1. For a 6-year validity period: If the driver has not accumulated 12 penalty points in each scoring cycle, they can renew for a 10-year validity period. A replacement is required three months before the license expires, upon reaching the specified age, when changing to a lower vehicle class due to physical conditions, or when converting an out-of-town license. 2. For a 10-year validity period: If the driver has not accumulated 12 penalty points in each scoring cycle, they can renew for a long-term driver's license.
19
3
Share

What Do Gross Vehicle Mass and Curb Weight Mean?

Gross vehicle mass refers to the total weight of a fully equipped vehicle, including passengers (including the driver) and cargo as specified. Curb weight refers to the empty weight of a vehicle under normal operating conditions, ready to drive, without passengers (including the driver) or cargo. Violations: Transport authorities have pointed out that the following five scenarios should be identified as overloaded vehicles and must be corrected: two-axle vehicles with a total weight of the body and cargo exceeding 20 tons, three-axle vehicles exceeding 30 tons, four-axle vehicles exceeding 40 tons, five-axle vehicles exceeding 50 tons, and six-axle or more vehicles exceeding 55 tons. Traffic police departments will temporarily confiscate the driver's license if the cargo weight exceeds the permitted load capacity stated on the vehicle registration certificate by more than 30 tons, even if none of the above five scenarios apply. Vehicles that have already been penalized or unloaded on the same day and whose post-unloading weight matches the records on the relevant certificates provided should not be penalized or unloaded again. Notes: Curb weight affects a vehicle's fuel consumption. The heavier the curb weight, the higher the fuel consumption. For household car purchases, priority should be given to economical, small-displacement cars to achieve fuel efficiency.
16
1
Share

Do rear passengers in a car need to wear seat belts?

Rear passengers in a car need to wear seat belts. Detailed analysis is as follows: 1. Not wearing a seat belt in the back seat not only seriously threatens the safety of the front-row occupants but also poses safety risks to oneself. In the event of a vehicle accident, without the protection of a seat belt, rear passengers may directly impact the front seat backs, causing injuries to the nose, arms, neck, etc.; 2. Article 51 of the "Road Traffic Safety Law" stipulates that when a motor vehicle is in motion, the driver and passengers must use seat belts as required. Therefore, during vehicle operation, if occupants do not wear seat belts, it constitutes a violation of the law; 3. Many people may psychologically rely on the idea that not wearing a seat belt in the back is safer because they believe seat belts are only to prevent being thrown out of the vehicle. The rear of the car is more enclosed than the front, and even in a collision, the front seats provide a barrier, making it seem much safer.
9
1
Share

Can the engine hood gap be adjusted?

Engine hood gaps can be adjusted. The main requirements for an engine hood are heat insulation, sound insulation, lightweight construction, and high rigidity. Here are the solutions for adjusting engine hood gaps: 1. There are two black rubber pads behind the grille on the radiator frame, one on each side, which support the hood. By manually rotating these black rubber pads left or right, you can adjust the gap between the hood and the grille. 2. Open the engine hood. On both sides, there are three screws securing the fender—one at the tail of the headlight, one beneath the sponge at the innermost part of the hood, and one in the middle. Loosen these three screws, pull the fender outward slightly until the hood gap feels appropriate, then tighten the screws. 3. There are two plastic blocks at the front of the hood and two soft plastic pieces that can be rotated all the way down. On the left and right sides of the hood, there are two U-shaped tabs. Remove the plastic clips on top, and adjust the right side accordingly.
7
4
Share

What car has a cobra as its logo?

The car with a cobra as its logo is the Dodge Viper produced by Ford in the United States. It is a racing sports car with a powerful V8 engine. The Ford GT500 coupe is adorned with classic Le Mans-style white stripes on its roof, extending from the front to the rear of the car. Here is some related information about the Dodge Viper: 1. The Dodge Viper is a supercar series launched by Chrysler after acquiring Dodge Brothers in 1989. 2. The Viper series represents American supercars and is considered the best value for money among supercars. 3. However, the Viper continues to embody the essence of American sports cars, designed from the outset to achieve racing-level handling, striving to create a top-tier civilian sports car, truly an American-style supercar. 4. The SRT Viper is a classic example of inheriting the tradition of American sports cars, fully embracing large displacement engines.
6
1
Share

What does Mazda i-stop mean?

Mazda's i-STOP is an intelligent idle stop system. After the vehicle comes to a stop, the engine automatically shuts off immediately, and when the vehicle starts moving again, it restarts within 0.3 seconds to save fuel. Information about the intelligent idle stop system is as follows: 1. This idle stop system is used to replace the starter, injecting fuel into the engine cylinders that are in a stopped state. This causes combustion, thereby restarting the engine. 2. The advantage of the intelligent idle stop system (SISS) is that it not only significantly reduces the weight burden on the engine and battery, but also the engine restart time is extremely short, only 0.3 seconds.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.