How to Reset the Accord Tire Pressure Warning Light

2 Answers
OBryce
07/29/25 1:28am
To reset the Accord tire pressure warning light: Start the vehicle and press the tire pressure warning light reset button for 3 seconds. Taking the 2021 Accord 260 Luxury Starry Sky Limited Edition as an example, it is a midsize 4-door 5-seater sedan with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm and a fuel tank capacity of 56 liters. The 2021 Accord 260 Luxury Starry Sky Limited Edition is equipped with a 1.5T turbocharged engine and a CVT transmission, delivering a maximum power of 143 kW and a maximum torque of 260 Nm. It features front-wheel drive, with a MacPherson strut front suspension and a multi-link independent rear suspension.
Was this review help?
16
5
Share
LeAddyson
08/12/25 5:34am
I've been driving my Accord for several years, and the tire pressure light coming on is a common minor issue. That day, it was a cold start, and the light suddenly flashed, so I immediately pulled over to check. First, I took out the spare pressure gauge and measured the pressure of all four tires—the front tires should be around 32 PSI, and the rear tires 30 PSI. I found the front tires were only at 28, probably due to contraction from the cold. I quickly inflated them to 32 PSI, confirmed all tires were evenly pressurized, and got back in the car. With the key in the ON position but without starting the engine, I located the TPMS reset button below the left side of the steering wheel, held it for about 5 seconds, and watched as the light blinked a few times before turning off. If the light stays on after adjusting the pressure, it might be a sensor malfunction or weak battery, requiring a visit to the shop. I make it a habit to check tire pressure monthly, especially during seasonal changes when temperature fluctuations can cause pressure drops and trigger alerts. Low pressure not only increases fuel consumption but also poses higher risks on highways, so timely handling saves trouble. Remember, the manual has detailed diagrams on the reset button location—newcomers can easily give it a try.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

What is the EPS fault code?

esp fault code is the right front wheel no speed signal fault. When the ESP light on the dashboard lights up, it indicates that there may be a fault in the vehicle stability system, and it should be sent to a 4S shop for inspection as soon as possible. Since ESP is not an independent system, it generally shares sensors with other electronic devices such as ABS and TCS, so the ESP fault light may also be caused by damage to other functions. ESP consists of three main parts: sensors, actuators, and electronic control unit. The sensors generally include wheel speed sensors, steering wheel angle sensors, lateral acceleration sensors, yaw rate sensors, brake master cylinder pressure sensors, etc. The actuators generally include traditional braking systems, hydraulic regulators, etc. The electronic control unit is linked with the engine management system and can intervene and adjust the engine power output.
4
4
Share

Where is the computer connector of Roewe 550 located?

The computer connector of Roewe 550 is located below the steering column. Technicians can connect diagnostic computers through the OBD interface to read fault codes, which helps them quickly identify the cause and location of the fault. The new Roewe 550 is SAIC's first model based on the DIS full-digital simulation development system, featuring core technologies that lead domestically and synchronize globally, with innovative applications of the D5II digital intelligent system. The dimensions of the Roewe 550 are 4648mm in length, 1827mm in width, and 1483mm in height. The Roewe 550 is equipped with a TST 6-speed oil-cooled dual-clutch automatic transmission system, EPB digital intelligent electronic parking system, and Configurable color-customizable digital instrument system.
17
5
Share

What does Tesla Dual Motor mean?

Tesla Dual Motor refers to dual motors. Taking the Tesla Model S P85D as an example, here is a detailed introduction to the Tesla Model S P85D: 1. In the Tesla Model S P85D, the 'D' stands for Dual Motor (dual motors) plus DAS (Driver Assistance System). The term 'Dual' is borrowed from Intel's dual-core CPU naming convention, while the latter serves as a preliminary step toward autonomous driving technology with intelligent driver assistance. 2. The Tesla Model S P85D is equipped with an all-wheel-drive dual-motor system, with a top speed of 155 km/h. It features 360-degree ultrasonic sonar, enabling functions such as automatic parking, highway autonomous driving, and traffic jam following.
19
4
Share

What is the range of the Letin i5?

The range of the Letin i5 is 255km. The Letin i5 is a single-motor model, with the motor delivering a maximum power of 30kW and a maximum torque of 150Nm. It is equipped with a ternary lithium-ion battery across the entire lineup. Ternary lithium-ion batteries offer higher energy density and lighter weight, making them more suitable for family cars. In terms of the suspension system, the Letin i5 features a MacPherson independent front suspension and a trailing-arm non-independent rear suspension. Externally, the Letin i5 boasts a dynamic and stylish overall design, with a V-shaped front grille complemented by a U-shaped chrome strip around the lower grille, enhancing the front-end's premium feel. The dimensions of the car are 4055mm in length, 1630mm in width, and 1510mm in height, with a wheelbase of 2400mm.
6
4
Share

What is the battery model for the JAC Refine S3?

The battery model for the JAC Refine S3 is 55D23L. This vehicle requires a 12V 55Ah battery with a capacity of 60Ah and a voltage of 12V. The dimensions of the Refine S3 are 4325mm in length, 1765mm in width, and 1660mm in height. Viewed from the rear, the car features two chrome trim strips running horizontally across the tail, giving it a visually robust appearance that highlights its SUV off-road character, creating an excellent overall visual effect. In terms of power, the mass-produced Refine S3 is equipped with a 4GB1.5L engine, delivering a rated power of 83kW and a maximum torque of 146Nm, with low-end torque reaching 100Nm. The engine is paired with either a 6MT or CVT transmission.
10
0
Share

What are the reasons for the car not starting and the dashboard flashing continuously?

The reasons for the car not starting and the dashboard flashing continuously are: 1. The battery power is too low; 2. There is a fault in the main power supply lines and control parts of the vehicle, such as a broken circuit, damage to the dashboard, or problems with the main control components of the power supply. This situation occurs relatively infrequently and can only be further diagnosed by checking the vehicle's electrical system fault code status through a repair facility. When starting the engine, the battery needs to release a large current. If the battery's performance is poor, it may result in difficulty starting the engine or even prevent it from starting altogether. The battery is a wearable part that requires regular replacement. As the number of charge and discharge cycles increases, the battery's performance may decline. Normally, a battery can last for 3 to 4 years.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.