How to reset the abnormal tire pressure of Senova X35?

[JosiahRose]

The method to reset the abnormal tire pressure of Senova X35 is: First, turn on the ignition switch, start the car, and light up the central display screen. Then, in the vehicle settings options, click on "Tire" to enter the settings. Next, press the SET button, and three buttons will appear. Click "Confirm", and the car will display "Tire Pressure Monitoring Initialization". The BAIC Senova X35 is a model under BAIC Group, with dimensions of 4300mm in length, 1815mm in width, and 1640mm in height, and a wheelbase of 2570mm. In terms of appearance, the Senova X35 features a black mesh grille, a silver skid plate on the lower edge of the front bumper, and a dynamic overall shape. Additionally, it is equipped with lens-type headlights and C-shaped chrome decorations around the front fog lights.

[LeVera]

That morning while driving to work, I was startled when the dashboard suddenly displayed a tire pressure abnormality. As a new car owner, I quickly found a safe spot to pull over and checked each tire's pressure with a spare tire gauge. Turned out the right rear tire was slightly underinflated, probably due to thermal contraction or a puncture. After using the onboard air pump to reinflate it to the proper pressure, I had to reset the system. For the Senova X35, there's usually a reset button under the steering wheel - following the manual's instructions, I held it down for a few seconds to complete the reset. Since then, I've made it a monthly routine to check tire pressures and invested in a high-quality tire pressure gauge. This not only saves on repair costs but also ensures smoother driving with proper inflation, plus no more frequent alarming to ruin the mood. Bottom line: don't panic when facing similar issues, just tackle them step by step.

[FaithLynn]

Hey, when an experienced driver encounters a tire pressure warning, it's always worth thinking twice—safety first, after all. My advice is to first check if there's an actual leak by using a tire pressure gauge on each wheel. The standard tire pressure for a Senova X35 is typically between 2.3 and 2.5 bar. If it's low, just top it up manually. If the pressure is fine but the warning light stays on, it might be a minor sensor issue—sometimes the TPMS system gives false alarms due to temperature changes. In that case, locate the reset button near the steering wheel, hold it for a few seconds, and the system will recalibrate. If the issue keeps happening, it could be a dying sensor battery or a slow leak. It's best to head to a shop for a full check-up—don't let it turn into a safety hazard. And remember, make it a habit to have the tire pressure system checked during regular maintenance—it’s a small step for peace of mind and safety.

[AlexFitz]

With over a decade of driving experience, I've encountered numerous tire pressure anomalies. Simply put, it's a three-step process. First, pull over and check if there are any obvious punctures or deformities in the tires. Use a manual tire pressure gauge to measure if each tire is at the normal value. If there's a leak, use an air pump to refill. Next, reset the system. For the Senova X35 model, there's a reset button on the dashboard or center console; press it and wait for the alarm to disappear. Pay attention to the impact of seasonal changes on tire pressure. Large temperature differences between winter and summer often cause false alarms. Just keep monitoring and don't worry too much—most of the time, you can handle it yourself.