How to Rescue an Automatic Car with a Dead Battery?

1 Answers
McMargaret
07/24/25 8:50pm
Automatic car dead battery self-rescue methods are: 1. Find a vehicle with a normal battery and prepare two jumper cables; 2. After turning off the engine, connect one cable to the positive terminal of the battery and the other cable to the negative terminal of the rescue vehicle's battery and the engine block of the rescued vehicle; 3. After ignition starts, remove the connections, paying attention to the reverse order of removal compared to installation. Normally, a new car's battery can last 3 to 4 years, and after replacing the battery, a new one should be replaced every two years. When using the vehicle daily, it is necessary to maintain the battery properly. Specific maintenance methods include: 1. Drive the car for a certain distance periodically; 2. Turn off lights and audio before parking and turning off the engine; 3. Prevent battery drain; 4. Avoid leaving the air conditioning on when the engine is off; 6. Regularly clean the battery; 7. Monitor the battery status indicator promptly.
Was this review help?
17
1
Share
More Forum Discussions

What does the first, second, and third shaft of a car mean?

1. First shaft: In the automotive field, the first shaft is also called the "input shaft." It is a shaft located in the gearbox (transmission) and connected to the clutch. Its function is to transmit the power from the car engine into the gearbox through the control of the clutch. 2. Second shaft: The second shaft is also called the output shaft. It is a shaft in the car's gearbox, directly connected to the drive shaft (propeller shaft), transmitting torque and rotational speed, which then drives the car through the differential. In four-wheel-drive vehicles, the second shaft is connected to the transfer case. 3. Third shaft: The third shaft refers to three axles, etc. Multiple drive shafts are used to transmit driving force from the engine to the drive wheels. Here, the shaft simply refers to the connecting bridge between the wheels on both sides, known as the axle. A two-shaft transmission is suitable for FF (front-engine, front-wheel-drive) layouts, while a three-shaft transmission is suitable for FR (front-engine, rear-wheel-drive) layouts. Additional information: 1. Manual transmission:
13
0
Share

What is the difference between low-end and high-end car models?

The core performance of high-end and low-end car models is basically the same. The differences often lie in peripheral features and decorations. The main distinctions in the dashboard include the audio system, CD player, decorative trims, air conditioning controls, etc. Here are the detailed differences: 1. High-end car configurations: High-end models usually come with features such as LCD panels, automatic air conditioning, navigation systems, automatic transmissions, leather seats, sunroofs, seat heating, power-adjustable seats, and performance enhancements like higher horsepower and larger tires. In contrast, low-end models typically have manual air conditioning, no LCD panels or navigation, manual transmissions, basic fabric seats, no sunroof or seat heating, manually adjustable seats, and economical performance configurations with smaller engines and lower horsepower. The dashboard of high-end models with LCD panels and automatic air conditioning is generally more aesthetically pleasing than that of low-end models. 2. Advantages of both high-end and low-end models: Both high-end and low-end models have their own advantages. From a safety perspective, high-end models usually have more airbags and richer active safety features, making them safer. Additionally, it is more convenient to add features later. From an electrical perspective, low-end models are better because electrical components are constantly being updated, and you can always purchase more advanced and trendy ones yourself.
2
4
Share

What is the general width of a sedan car

The width of a sedan varies depending on its class. Generally, common family sedans have a width ranging from approximately 1600mm to 1800mm. Below are detailed introductions about sedan classes: 1. Class A cars: These have a wheelbase between 2.5 meters to 2.7 meters and an engine displacement of about 1.5 to 2.0 liters, such as the Focus, Sagitar, Corolla, and Audi A3. Class A cars are the most widely used family cars in China. 2. Class B cars: These mid-range passenger cars have a wheelbase of about 2.7 meters to 2.9 meters and an engine displacement from 1.8 to 2.5 liters. In the Class B car market, models like the Mazda6, Accord, Mondeo, Sonata, Audi A4, Passat, and Toyota Camry belong to this category. 3. Class C cars: These high-end passenger cars have a wheelbase of about 2.8 meters to 3.0 meters and an engine displacement of 2.3 to 3.0 liters. The most renowned Class C cars in China include the Audi A6, BMW 5 Series, and Mercedes-Benz E-Class.
19
2
Share

Can a car charge the battery while idling after starting?

Yes, it can charge. When the battery charging indicator light on the dashboard is off, it means the car is charging. If it stays lit, it indicates a charging fault (when the ignition switch is turned on, the dashboard charging indicator light will briefly illuminate for a few seconds before turning off, which is a normal system self-check and nothing to worry about). In such cases, it is necessary to visit a repair shop for inspection. Here is some additional information: 1. How car charging works: The car charging process essentially involves the engine driving the alternator (generator) to produce electricity, which is then rectified and regulated to provide a certain voltage to the battery. Typically, this voltage is slightly higher than the battery voltage (e.g., 14V, whereas a normal battery is usually 12V), achieving constant voltage charging. 2. Why it can charge: At idle speed, although the engine RPM is low, it still drives the alternator to work, thus outputting a stable DC voltage. Since the battery power is relatively not that large, the car can charge even at idle speed, albeit at a slower rate. Modern cars use AC generation, and the battery power is mainly used to start the car, which consumes a significant amount. However, once the car is running, the battery power is no longer consumed.
19
3
Share

How to Scrap a Vehicle Washed Away by Water?

Vehicle washed away scrap method introduction is as follows: 1. Introduction one: The owner of the motor vehicle should sell the motor vehicle to a motor vehicle recycling enterprise before the scrap deadline. The motor vehicle recycling enterprise should submit an application for cancellation to the vehicle management office after the motor vehicle is dismantled. 2. Introduction two: If the vehicle cannot be driven back to the place of registration, the owner of the motor vehicle can sell the scrapped motor vehicle to a motor vehicle recycling enterprise in the location of the vehicle. Vehicle scrap procedure introduction is as follows: 1. Introduction one: The owner of the motor vehicle should bring identity proof, motor vehicle registration certificate, motor vehicle driving license, and motor vehicle license plate to the business department of the motor vehicle dismantling factory to fill in the "Motor Vehicle Stop, Resume/ Cancellation Registration Application Form". 2. Introduction two: Apply at the registration acceptance counter, and a "Vehicle Scrap Notice" will be issued for vehicles that have reached the scrap age. 3. Introduction three: The vehicle owner can choose a qualified recycling enterprise to send the vehicle for dismantling with the "Notice". 4. Introduction four: The recycling enterprise will dismantle the vehicle and take photos after checking the "Notice". 5. Introduction five: The vehicle owner should complete the scrap registration.
11
4
Share

Is the vehicle license still valid if the owner passes away?

If the owner of the household registration has passed away and the registration has been canceled, all documents become invalid, and naturally the vehicle license is no longer valid. Here is some information about the vehicle license: 1. Introduction 1: The motor vehicle license is the legal document permitting the vehicle to operate on roads within China. The license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the endorsed core information, while the back displays the vehicle photo, sealed in plastic. The supplementary page contains additional endorsed core information. 2. Introduction 2: The text on the front of the main page is in black, with the title 'People's Republic of China Motor Vehicle License' in 12pt bold font, centered. Other details include 'License Plate Number', 'Vehicle Type', 'Usage Nature', 'Owner', 'Address', 'Brand Model', 'Engine Number', 'Vehicle Identification Number', 'Registration Date', and 'Issue Date'. 3. Introduction 3: The supplementary page also features black text, listing details such as 'License Plate Number', 'Approved Passenger Capacity', 'File Number', 'Curb Weight', 'Gross Weight', 'Approved Load Capacity', 'Overall Dimensions', 'Permitted Towing Weight', 'Remarks', and 'Inspection Records'.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.