How to Report a Vehicle Collision to Insurance?

1 Answers
LaAbel
07/30/25 2:36am
When a collision occurs between vehicles, keep the scene undisturbed. Call the traffic police at 122 to report the incident. The traffic police will arrive at the scene to determine liability and issue an accident report. The at-fault party should then call their own insurance company to file a claim. Commercial auto insurance is an open policy, divided into basic coverage and additional coverage, with the latter unable to be insured independently.
Was this review help?
6
1
Share
More Forum Discussions

What Causes Brake Failure After a Manual Transmission Car Stalls?

It is due to lack of maintenance of the braking system, excessive impurities in the brake pump, poor sealing, or vacuum power pump failure. Below is relevant information about manual transmissions: Introduction: A manual transmission (MT), also known as a manual gearbox, requires the driver to manually shift gears by moving the gear lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed variation. Principle: By using the shift fork to change the transmission ratio (gear ratio) of the meshing gears, the driving torque is adjusted to suit different operating conditions. Since the torque conversion range of the hydraulic torque converter in automatic transmissions is not sufficiently broad, multiple sets of planetary gears are connected in series behind the turbine to improve efficiency. The hydraulic control system automatically operates the planetary gears in response to changes in engine operation, achieving automatic torque conversion and speed variation. The auxiliary automatic shifting mechanism cannot meet all driving needs, such as parking or reversing, so an intervention device—the manual shift lever—is included, marked with P (Park), R (Reverse), N (Neutral), and D (Drive). Additionally, within the drive mode, there are supplementary gear positions "2" and "1" for starting or climbing slopes.
19
0
Share

What could be the reason for the sudden malfunction of the GL8 power sliding door?

GL8 power sliding door suddenly not working could be due to a damaged power door controller. Power door fuse damage: It might be caused by a blown fuse that controls the vehicle's power sliding door. Other possibilities include a faulty power door switch, damaged wiring harness connector, or physical obstruction of the door. Power sliding doors are very convenient when functioning properly. The troubleshooting method is to press the stop button on the remote control and observe whether the light in the upper right corner of the remote illuminates. (Red light)) If it doesn't light up, the battery might be completely drained, so simply replacing it with the same type of battery should resolve the issue. Checking the cause of power door malfunction: For fault diagnosis, first check whether the two main power cables (neutral/live wires) from the motor output are properly connected or have come loose. While securing the wires might solve the problem, if inspection reveals this isn't the case, then you need to test the entire power cable for poor contact, broken wires, or abnormal current transmission. If the inspection shows abnormal conductivity in the wires, simply replace them with new ones (the wire specification should be dedicated three-core retractable wires for doors)) Refer to the wiring method before replacing the wires.
1
4
Share

What are the effects of not applying film to the windshield?

There are impacts such as heat insulation, explosion-proof, and anti-glare. The following is a related introduction to the windshield: Introduction: The windshield was an idea that Ford came up with in the 1920s, sandwiching two pieces of glass together with a layer of PVC plastic in between to create a type of glass similar to a sandwich. This technology is still in use today. Function: The windshield of a car is placed vertically, like a large plane mirror, which will image the passengers inside the car in front of the car, hindering the driver from seeing pedestrians on the road and easily causing illusions. When the windshield of the car is installed at an angle, the reflection of the passengers inside the car through the front windshield is imaged above the front of the car, while the pedestrians on the road are in front of the car, allowing the driver to distinguish between the passengers inside the car and the pedestrians on the road.
6
5
Share

What are the consequences of a blocked exhaust port?

It can lead to a decrease in engine power. Below is a related introduction to the automobile exhaust system: Introduction: The automobile exhaust system refers to the system that collects and discharges waste gas, generally composed of the exhaust manifold, exhaust pipe, catalytic converter, exhaust temperature sensor, automobile muffler, and exhaust tailpipe, among others. Function: The automobile exhaust system mainly discharges the waste gas produced by the engine's operation while reducing the pollution and noise of the discharged exhaust. The automobile exhaust system is primarily used in light vehicles, micro vehicles, buses, motorcycles, and other motor vehicles. A car is a comprehensive noise source that includes various types of noise. Since none of the car's noise sources are completely sealed (some are only partially sealed), the noise radiated by the entire vehicle depends on the sound level, characteristics, and interaction of each noise source.
13
1
Share

Which lane should a motorcycle take for a left turn?

Merge into the left-turn lane; motorcycles, being motor vehicles, should follow the same rules as cars. Below is relevant information about motorcycles: Introduction: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine, steered by handlebars to control the front wheel. It is lightweight, agile, and fast, widely used for patrols, passenger and cargo transport, and also serves as sports equipment. Categories: Taking Japan as an example, motorcycles are referred to as "two-wheelers" and are classified into three categories: small ordinary automatic two-wheelers, ordinary automatic two-wheelers, and large ordinary automatic two-wheelers. In Taiwan, they are categorized as light motorcycles, heavy motorcycles, and large heavy motorcycles. Light motorcycles refer to those with an engine displacement of 50cc, heavy motorcycles refer to those with a displacement below 250cc, and large heavy motorcycles refer to those with a displacement above 250cc.
20
4
Share

What is the coverage amount for compulsory motorcycle insurance?

According to the insurance tier selected by the vehicle owner, the coverage amount is determined. Below is relevant information about compulsory traffic insurance: Introduction: The full name of compulsory traffic insurance is "Compulsory Traffic Accident Liability Insurance for Motor Vehicles." It is a mandatory liability insurance where the insurance company compensates for personal injuries, fatalities, and property losses (excluding the vehicle's occupants and the insured) caused by road traffic accidents involving the insured motor vehicle, within the liability limits. Fee Standard: Compulsory traffic insurance is China's first compulsory insurance system implemented by national law. Its premiums follow a nationally unified fee standard, stipulated by the state. However, the price of compulsory traffic insurance varies for different vehicle models, with the main influencing factor being the "number of vehicle seats."
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.