How to Report a Blocking Car and Request Removal?

1 Answers
VonNora
07/29/25 5:56pm
To report a car blocking the way and request its removal, you can call 110 or the traffic police hotline 122 and provide the license plate number. The traffic police will help contact the car owner to move the vehicle. Below are precautions regarding temporary parking: 1. Allowing passengers to board or alight temporarily: Temporary parking permits passengers to board or alight, and waiting for 2-3 minutes is acceptable. However, if surveillance footage captures the driver parking the car by the roadside, even if the engine is still running, they usually won't stop. 2. No parking on yellow grids: Temporary parking within the motor vehicle lane must not exceed 5 minutes. Even with temporary parking signs, never park on sections marked with yellow grid lines, as it is undoubtedly illegal. Although these two signs may seem conflicting, it is clear in traffic regulations that parking on yellow grids is strictly prohibited. 3. No-parking zones: Road sections near bus stops, emergency stations, gas stations, fire hydrants, fire station entrances, and within 30,000 mm of these locations must not be parked on, regardless of duration. Additionally, intersections, railway crossings, sharp turns, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and road sections within 5,000 mm of these areas are strictly no-parking zones.
Was this review help?
9
5
Share
More Forum Discussions

Where is the license plate with 'Chuan S' from?

Chuan S is the license plate for Dazhou, Sichuan. Here is some related information about license plates: 1. License plates, commonly known as vehicle plates, refer to the number plates attached to the front and rear of a vehicle. They are typically made of aluminum, tinplate, plastic, or paper, and display the vehicle's registration number, registration region, and other relevant information. 2. License plates serve as a numbering and information registration system for vehicles. Their main purpose is to identify the region to which the vehicle belongs and to allow tracking of the vehicle's owner and registration details based on the plate number. 3. Small vehicle license plates: blue background with white characters and white borders. These are used for medium-sized and smaller passenger vehicles, cargo vehicles, and specialized operation vehicles.
18
1
Share

What is a Retarder?

Retarder is used as an auxiliary device for the braking system, mainly applied to buses over 5 tons and trucks over 12 tons. For vehicles frequently operating in mountainous or hilly areas, its primary function is to enable sustained speed reduction or maintain stable speed during long downhill descents, while alleviating or eliminating the load on service brakes. Detailed information about retarders is as follows: 1. Based on different working principles, they can be classified into engine retarders, hydraulic retarders, electric turbo retarders, motor retarders, and aerodynamic retarders. 2. According to different forms of braking torque application, they can be categorized as primary retarders (acting on the front end of the transmission) and secondary retarders (acting on the rear end of the transmission).
18
2
Share

What Causes White Smoke When Starting the Engine?

Engine starting with white smoke is caused by: 1. The engine temperature being too low; 2. Incomplete combustion of some fuel, resulting in white smoke being expelled with the exhaust; 3. Water in the fuel supply system, which can cause white smoke when starting. Daily car usage precautions include: 1. Regularly check and replenish antifreeze; 2. Avoid using the windshield wipers or spray nozzles when the windshield is frozen; 3. Regularly check the battery charge; 4. Adjust tire pressure; 5. Warm up the car for about 1 minute before driving; 6. Start and drive slowly on icy roads.
5
2
Share

How many driving modes does the Mercedes-Benz E300 have?

The Mercedes-Benz E300 offers three driving modes: Standard Comfort Mode, Economy Mode, and Sport Mode. Taking the 2021 Mercedes-Benz E300 as an example, its body dimensions are: length 5078mm, width 1860mm, height 1484mm, with a wheelbase of 3079mm and a fuel tank capacity of 66 liters. The 2021 Mercedes-Benz E300 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 190kW at 5800-6100 rpm and a peak torque of 370Nm, paired with a 9-speed automatic transmission.
16
4
Share

What causes the high voltage of the Chevrolet Cruze sensor?

Chevrolet Cruze sensor voltage being too high may be caused by a sensor malfunction, issues with the computer circuit board, or a faulty generator voltage regulator. Here is some relevant information: 1. A sensor is a detection device that can sense the measured information and convert the sensed information into electrical signals or other required forms of information output according to certain rules to meet the requirements of information transmission, processing, storage, display, recording, and control. 2. The functions of the sensors are as follows: (1) Intake pressure sensor: Reflects changes in the absolute pressure in the intake manifold and provides the ECU (Engine Control Unit) with a reference signal for calculating the duration of fuel injection; (2) Throttle position sensor: Measures the opening angle of the throttle and provides the ECU with a reference signal for fuel cutoff, control of the fuel/air ratio, and ignition timing correction; (3) Intake temperature sensor: Detects the intake temperature and provides the ECU with information for calculating air density; Coolant temperature sensor: Detects the temperature of the coolant and provides the ECU with engine temperature information;
10
4
Share

How Many Digits Does an Engine Number Typically Have?

Common engine numbers typically range between 7 to 8 digits. The sequencing and content of engine numbers may vary among different manufacturers. Generally, they include the engine model, production date, and a randomly assigned serial number when the engine comes off the production line. Some may also include a place-of-origin code. Engine models are identification codes assigned by engine manufacturers in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. These codes represent information such as the manufacturer, specifications, performance, features, technology, purpose, and batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. Engines installed in passenger cars or multi-purpose passenger vehicles are required to display the professional manufacturer, model, and production number of the engine. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's product line, and multiple engines can share the same model. The engine number, however, is a unique production identifier assigned to each individual engine, and no two engines share the same number. Structure of an Engine Number: Prefix: Includes product series codes, generation symbols, and regional or corporate codes. Manufacturers may choose appropriate letters as needed, but these must be approved and recorded by the industry standardization unit. Middle Section: Composed of symbols representing the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Suffix: Consists of symbols indicating structural and usage characteristics. Tail: Distinguishing symbols. When differentiation is needed due to improvements or other reasons within the same product series, manufacturers may select appropriate symbols. The suffix and tail can be separated by a hyphen (-).
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.