How to Replace the Wiper Blades on the X-Trail?
1 Answers
Lift the metal wiper arm away from the windshield and maintain it perpendicular to the windshield in a stable position. Then press the tab to release and remove the old wiper blade, separating it from the metal arm. Insert the new wiper blade and gently rotate it until the hook snaps into place to secure it. Below is an introduction about wipers: 1. Wipers, also known as windshield wipers, are devices used to sweep away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. 2. The wiper motor adopts a 3-brush structure for easy speed variation. The intermittent timing is controlled by the intermittent relay, utilizing the motor's return switch contacts and the relay's resistor-capacitor charge-discharge function to make the wiper sweep at a certain cycle. The wiper blade rubber is the tool that directly removes rainwater and dirt from the glass. The blade rubber is pressed against the glass surface by a spring strip, and the lip must match the angle of the glass to achieve the required performance. 3. Generally, there is a wiper control knob on the car's combination switch lever, with three settings: low speed, high speed, and intermittent. The top of the lever is the washer button switch; pressing it sprays washer fluid to clean the windshield in coordination with the wiper. The washer system is a common device in cars today, consisting of a water reservoir, water pump, water delivery pipe, and spray nozzles. The washer fluid is divided into fine jets by the squeezing action of 2 to 4 spray nozzles and directed at the windshield, working with the wiper to clean the windshield.
