How to replace the wiper blades on the Mazda3 Axela?

1 Answers
ColemanLynn
07/29/25 6:09pm
Method for replacing the wiper blades on the Mazda3 Axela: Push the wiper lever to the OFF position, lift the wiper blade and pry it up with a key, then pull the wiper blade and wiper arm into a vertical position. There is a fixed groove at the head of the wiper blade. Pull it downward firmly or pry it with a key, and the rubber blade can be pulled out. Then, replace it with a new wiper blade. The Mazda3 Axela has a length of 4582mm, width of 1795mm, height of 1458mm, and a wheelbase of 2700mm. The vehicle is equipped with 1.5L and 2.0L high-compression ratio direct-injection gasoline engines, paired with a 6-speed manual or 6-speed automatic transmission.
Was this review help?
16
5
Share
More Forum Discussions

How to Replace a Car Headlight Cover?

Method for replacing a car headlight cover: 1. Remove the headlight assembly, use a heat gun to warm the area around the cover to soften the adhesive, then pry off the cover; 2. Take off the old headlight cover, clean out the old adhesive from the groove, and apply new sealant; 3. Place the new cover on and press it firmly, wiping away any excess sealant; 4. After drying, reinstall the headlight assembly. Car headlights, also known as car front lights or LED daytime running lights, are crucial for safe driving at night or in poor weather conditions. Regular maintenance and timely replacement at a repair shop when damaged are essential.
2
4
Share

What is the weight of the 2018 Maybach?

2018 Maybach models weigh 2424 kilograms. Maybach is a German automobile brand founded by Wilhelm Maybach. This vehicle is a large car produced by Mercedes-Benz, with body dimensions of 5466mm in length, 1899mm in width, and 1500mm in height, and a wheelbase of 3365mm. The car's engine delivers a maximum power of 463kw, and both the front and rear suspensions use double-wishbone independent suspension. In terms of appearance, the 2018 Maybach features headlights paired with a horizontal grille design, creating a three-dimensional effect. The black interior decoration exudes maturity and stability, while the side waistline design is smooth and flowing.
6
4
Share

How to Remove the Rear Seat of an Octavia?

Method for removing the rear seat of an Octavia: 1. There are four covers around the interfaces of the rear seat, which serve to secure the seat cushion. First, remove these four covers; 2. Under the rear end of the seat, there are two additional hooks that only grip the sponge and fabric. By shaking the seat, the rear seat can be completely detached. The Octavia is a compact sedan produced by SAIC Motor, with body dimensions of 4675mm in length, 1814mm in width, and 1460mm in height, and a wheelbase of 2686mm. The front suspension of the vehicle is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
1
3
Share

What does the tire model code mean?

Tire model codes represent tire size, tire section width, aspect ratio, rim diameter, carcass ply material, maximum speed supported by the tire, and maximum load capacity per tire. Most tire model markings are in the format of 215/70R15, where 215 indicates the tire section width, 70 is the aspect ratio, R denotes the radial structure of the tire, and 15 is the outer diameter of the rim. Car tires are one of the important components of a vehicle, directly in contact with the road surface, working together with the car suspension to mitigate the impact during driving. Therefore, they must have high load-bearing performance and traction performance to ensure good ride comfort and smooth driving.
1
3
Share

Where is the spare tire of the Roewe i5?

Roewe i5's spare tire is located inside the trunk of the car. Open the trunk and lift the luggage mat to see it. You can remove the spare tire by unscrewing the fixing bolt. The spare tire is a backup tire for the car, and its specifications are usually the same as the original car tire specifications. However, there are also spare tires with special color rims, compact spare tires, folding spare tires, and run-flat tires. The Roewe i5 is a compact sedan produced by SAIC Motor. Its body dimensions are 4601mm in length, 1818mm in width, and 1489mm in height, with a wheelbase of 2680mm. The front suspension of this car is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
9
3
Share

How to Check Tire Pressure on Honda CRV?

Honda CRV's tire pressure monitoring system is a passive alert type, which cannot directly display specific tire pressure values. It only provides a warning light when abnormal tire pressure is detected. Tire pressure is like the blood pressure of a car, and its level significantly affects the vehicle's performance and power. When tire pressure is too high, it reduces the contact area between the tire and the ground, increases the pressure on the tire, and affects the tire's grip. The Honda CRV is a compact SUV produced by Dongfeng Honda, with body dimensions of 4621mm in length, 1855mm in width, and 1679mm in height, and a wheelbase of 2661mm. The car features unique seat designs where the front seats can be laid flat by removing the headrests, forming a bed together with the rear seats.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.