How to Replace the Wiper Blades on Baojun 510?

1 Answers
OChristopher
07/30/25 2:38am
The wiper blades used are frameless wiper blades. The frameless wiper blade itself consists of four components: the wiper rubber strip, the frameless wiper steel strip, the wiper cover, and plastic parts. Locate the joint and manually open the clip cover. Pull the wiper arm back and remove it. The elasticity of the frameless wiper steel strip is better than that of conventional framed wiper steel strips.
Was this review help?
18
3
Share
More Forum Discussions

Where is the spark plug located in a car?

Spark plugs are installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition cables, but over the past decade or so, most passenger car engines have switched to a design where the ignition coil is directly connected to the spark plug. How spark plugs work: The ground electrode of the spark plug is connected to the metal shell, which is in turn threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the center electrode, it ionizes the medium between the center electrode and the ground electrode, creating a spark that ignites the air-fuel mixture in the cylinder. Spark plug replacement intervals: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this can vary depending on the brand and engine type, so it's recommended to follow the owner's manual. Here are some general guidelines for replacement: Platinum spark plugs should be replaced at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs at 60,000-80,000 km.
6
1
Share

Where to Place the Temporary Parking Sign in the Car?

Temporary parking signs should be placed behind the front windshield on the passenger side of the car. More details are as follows: 1. Firstly, to make it easier to observe the temporary parking sign, it should be placed in a very visible location. This position is undoubtedly below the front windshield of the car. Secondly, it should be placed without obstructing the driving view. Therefore, the most suitable place for the temporary parking sign is behind the front windshield on the passenger side. 2. There are also some temporary parking signs on the market that can be placed outside the front windshield, but it is best not to use them. Due to issues with fixation, short-term use may not be a problem, but after prolonged exposure to sun and rain, the adhesive's stickiness will definitely decrease significantly.
12
3
Share

How to Charge a Dead Car Battery?

Car batteries can be recharged using methods such as jump-starting. Below are specific methods to charge a dead car battery: 1. Jump-starting Method: Connect the dead battery to another car's battery. Once power is transferred, the engine can be started, and the internal alternator will charge the battery while the engine is running. 2. Using a Battery Charger: At home, you can use a battery charger to recharge the battery. Typically, a household car battery has a capacity of around 60Ah, requiring a charging current of one-tenth of the battery capacity—6A. When charging at home, it's important to monitor the charging time. Most people charge overnight, with an average charging time of about 8 hours. If the charging current is too high, the battery may charge quickly, but overcharging can occur, leading to water loss, overheating, and even battery damage. Poor-quality batteries may even explode under such conditions.
17
2
Share

What Causes the Engine Noise to Increase When the Air Conditioner is Turned On?

It is normal for the engine noise to increase when the air conditioner is turned on because the engine needs to drive the compressor, which raises the idle speed of the engine, resulting in louder engine noise. If the engine noise becomes noticeably louder, it could be due to reasons such as a dirty or stuck throttle valve, abnormal noise from the air conditioning pump, or improper tension of the compressor drive belt. The reasons for increased engine noise when the air conditioner is turned on are as follows: 1. Dirty or stuck throttle valve: When the air conditioner is activated, the compressor also starts working, and since the compressor is driven by the engine, turning on the air conditioner increases the engine load. This requires the engine to increase the throttle opening to allow more air intake. If the throttle valve has carbon buildup or is stuck, it can cause engine vibration and abnormal noise, which becomes more noticeable when the air conditioner is turned on. 2. Abnormal noise from the air conditioning pump: There are two main causes for abnormal noise from the air conditioning pump—the electromagnetic clutch and the bearings inside the air conditioning pump. Noise from the electromagnetic clutch is mainly caused by wear, leading to increased gaps, while noise from the air conditioning pump bearings is due to insufficient lubrication. If these issues are not addressed promptly, they can cause the air conditioning pump to burn out, rendering the cooling system inoperative. 3. Improper tension of the compressor drive belt: If the drive belt is too loose, the electromagnetic clutch is prone to slipping; if the drive belt is too tight, the load on the electromagnetic clutch increases. Improper tension of the drive belt can cause abnormal noise in mild cases and damage to the air conditioning compressor in severe cases.
6
2
Share

What is the fuel tank capacity of a car in liters?

Generally, the fuel tank capacity of small cars is 35-45 liters, while that of medium-sized cars is 55-75 liters. After filling up the tank, the car can usually travel about 500 kilometers. Depending on the engine displacement of the car, a higher fuel consumption means a larger tank, and a lower fuel consumption means a smaller tank. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by car manufacturers is the volume from the bottom of the tank to the safety level. There is still some space from the safety level to the tank opening, which is reserved to allow the fuel inside the tank to expand when the temperature rises, preventing overflow from the tank's safety space. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. If the car owner wants to know the remaining fuel level in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient.
12
1
Share

Is a Wheel Alignment Necessary After Replacing All Four Tires?

Is a wheel alignment necessary after replacing all four tires? Yes, if the wheel alignment data falls outside the reasonable range, it can lead to irregular tire wear, vehicle shaking, or pulling to one side. Situations that require a wheel alignment include: 1. After installing new tires or following collision repairs; 2. Uneven wear on one side of the front or rear tires; 3. The steering wheel feels excessively heavy or floats and shakes while driving; 4. The vehicle pulls to the left or right when driving straight. Front wheel alignment includes four main aspects: caster angle, kingpin inclination angle, camber angle, and toe-in. Rear wheel alignment includes camber angle and individual rear wheel toe-in. Collectively, front and rear wheel alignment is referred to as wheel alignment, commonly known as four-wheel alignment.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.