How to Replace the Wiper Blades on a Volkswagen Lavida?

1 Answers
LeAlessandra
07/28/25 6:03pm
Method for replacing the wiper blades on a Volkswagen Lavida: 1. Lift the wiper arm by hand and place a towel underneath to prevent damage to the windshield; 2. Turn the wiper blade upwards to expose the root, which typically has a universal U-shaped connector; 3. Pinch the clip inside the U-shaped connector and pull it backward to remove the blade; 4. Reinstall the new blade by reversing the steps. The Volkswagen Lavida is the first A-segment car independently developed by Shanghai Volkswagen and is an important model in Volkswagen's global product strategy. In terms of body dimensions, the car measures 4605mm in length, 1765mm in width, 1460mm in height, with a wheelbase of 2610mm.
Was this review help?
8
2
Share
More Forum Discussions

Where is the air intake of the Passat located?

The air intake of the Passat is located under the hood. The air conditioning filter serves the following three purposes: 1. Provide fresh air: It prevents the car windows from fogging up, ensuring clear visibility for the driver and safe driving; it supplies fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; it effectively sterilizes and deodorizes. 2. Ensure safety and hygiene: It keeps the cabin air clean and free from bacterial growth, effectively separating solid impurities such as dust, powder, and grinding particles from the air; it efficiently blocks pollen, ensuring that passengers do not suffer allergic reactions that could affect driving safety. 3. Adsorb harmful substances: It absorbs moisture, soot, ozone, and odors from the air, with strong and long-lasting moisture absorption capabilities.
1
3
Share

What are the common faults of Ford Fiesta dual-clutch transmission?

Common issues with dual-clutch transmissions include low-speed jerking, abnormal noise during startup, and oil leakage. Here are specific solutions: 1. Low-speed jerking: Inspect the hydraulic control unit of the dual-clutch transmission. If damage is found, timely replacement or repair of the hydraulic unit can resolve the low-speed jerking issue. 2. Abnormal noise during startup: This is typically caused by excessive internal clearance in the dual-clutch transmission's flywheel plate, resulting in a rattling noise during startup. Replacing the flywheel plate with a new one featuring torque damping can eliminate the noise. 3. Oil leakage: This is usually due to damaged or deformed separator bearing gaskets, leading to poor sealing. Replacing the gasket with an improved version can solve the oil leakage problem.
8
4
Share

Where is the fuel tank button for the Mercedes-Benz C200?

The fuel tank cover switch for the Mercedes-Benz C200 is located below the door armrest. Press this button to open the fuel tank cover located on the right side of the car. Below is some relevant information about the Mercedes-Benz C200: Dimensions: The body dimensions are 4784 mm in length, 1810 mm in width, and 1457 mm in height, with a wheelbase of 2920 mm and a fuel tank capacity of 66 liters. Powertrain: The Mercedes-Benz C200 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115 kW and a maximum torque of 250 Nm, paired with a 9-speed automatic transmission. Suspension: It features a multi-link independent suspension system for both front and rear.
10
0
Share

What Causes the Chassis Noise in Mercedes-Benz GLC?

Mercedes-Benz GLC chassis noise can be caused by: 1. Loose components: Reason: Due to severe impact or improper installation of additional equipment, causing interference between two components; Solution: Perform reshaping repair or replace related components to eliminate interference. 2. Loose bolts or nuts: Reason: Long-term driving on poor road conditions leads to loose bolts, improper disassembly or installation causing bolt damage or insufficient torque; Solution: Tighten the bolts and replace them if necessary. 3. Drive shaft universal joint failure: Reason: Damaged dust cover leading to oil leakage and untimely repair, causing abnormal wear of small bearings; Solution: Replace the new outer (inner) CV joint or universal joint.
10
3
Share

What is the model of the Mercedes-Benz 2-door coupe?

Mercedes-Benz two-door models include: imported Mercedes-Benz E-Class, imported Mercedes-Benz C-Class, Mercedes-Benz SLC-Class, Mercedes-Benz SL-Class, Mercedes-Benz SLK, SLS-Class AMG, Mercedes-Benz CL, SL-Class AMG, Mercedes-Benz CLK, SLK-Class AMG, totaling 10 models. Relevant information about Mercedes-Benz cars is as follows: 1. Introduction: Mercedes-Benz, a German automobile brand, is one of the premium car brands, renowned for its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe styles. 2. New Mercedes-Benz: The Mercedes-Benz S-Class is the high-end luxury model of the Mercedes-Benz lineup. With its elegant and stable appearance and luxurious configurations, the Mercedes-Benz S-Class has won the favor of many successful individuals. The new S-Class is only a mid-cycle facelift model.
1
0
Share

Are the Three Major Components of the Axela Imported?

The three major components of the Axela are not entirely imported. The rear suspension of the Axela is originally imported from Japan. The front suspension of the Axela uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The older model of the Axela used a multi-link independent suspension for the rear. The Axela is a car produced by Changan Mazda and is the third model to adopt the new-generation SKYACTIV technology and the KODO design theme. This model is equipped with two SKYACTIV gasoline engines: the SKYACTIV-G 1.5L, which is being introduced to the Chinese market for the first time, and the highly efficient SKYACTIV-G 2.0L engine.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.