How to Replace the Wiper Blades on a Roewe?
3 Answers
First, fully lift the wiper blade. To avoid damaging the windshield during the removal and installation process, it is recommended to place a cloth on the windshield when handling the wiper blade. Then, adjust the angle of the wiper blade, preferably making it form a 90-degree angle with the wiper arm. Lift the rubber blade to remove it entirely, then pull the rubber blade sideways while pressing firmly downward on the bracket with the other hand to separate the wiper blade from the arm.
I've replaced the wiper blades on my Roewe car several times by myself. Simply put, first turn off the engine to ensure the car is completely shut down, which makes the operation safer. Stand in front of the car and gently lift the wiper arm away from the windshield to prevent it from snapping back and breaking the glass. Roewe wipers usually have a hook or button-type connection; locate the position and press the clip to easily remove the old wiper. Before taking out the new wiper, make sure to check the model number for the correct size. For example, a Roewe i5 might use a 26-inch blade for the driver's side and a 14-inch for the passenger side—buying the wrong size would make installation impossible. When installing the new wiper, align it properly, push and pull until you hear a "click" sound to secure it in place. After installation, start the car to test the washer and wiper functions, ensuring there’s no shaking or streaks. It’s recommended to check the rubber strips for wear every six months and replace them if they’re too rough—driving with poor visibility in the rain is dangerous. Doing it yourself takes less than ten minutes and saves on repair costs.
Replacing the Roewe wiper blades is quite straightforward. When I first learned, I just followed the steps. First, turn off the engine to ensure the car is stationary, then gently lift the wiper arm without applying excessive force to avoid breakage. There's usually a small button or hook at the connection point—press it and pull out the old wiper blade. When selecting new wiper blades, make sure to choose the Roewe-specific size, such as the designated model for the RX5. When installing the new blade, ensure the direction is correct and push it firmly into place until it clicks. After installation, spray some washer fluid to test the smoothness. Don’t forget to regularly top up the washer fluid and clean the blades, as dust buildup can wear out the rubber. The whole process takes no more than 15 minutes and costs just a few dozen yuan to do it yourself—safe and cost-effective.
