How to Replace the Wiper Blades on a Nissan Tiida?
2 Answers
Method for replacing the wiper blades on a Nissan Tiida: 1. Lift or press the windshield washer switch, and the wiper arm will rise to a halfway position and stop; 2. Lift the wiper arm, press the clip on the wiper blade, and push the wiper blade downward to remove it; 3. Use needle-nose pliers to grip the two metal clips on the outer side of the metal end, then pull out the wiper rubber strip and spring plate. At this point, you can replace it with a new wiper blade. The Nissan Tiida is a compact car under Dongfeng Nissan, with dimensions of 4393 mm in length, 1766 mm in width, and 1539 mm in height, and a wheelbase of 2700 mm. In terms of power, the Tiida is equipped with a naturally aspirated engine, delivering a maximum horsepower of 122 HP, a maximum torque of 155 Nm, and a maximum power of 90 kW.
I've changed the wiper blades on my Nissan Tiida several times before, and it's actually quite simple. This morning when I noticed they weren't wiping cleanly while driving, I just went ahead and replaced them. First, lift the wiper arm away from the windshield to avoid damage - most older Tiidas use U-hook connectors. Press the square button in the middle of the wiper to remove the old rubber blade. Make sure to buy the correct size replacements: 26 inches for the driver side and 14 inches for the passenger side. You can easily find the right ones online by entering your car model and year. When installing new wipers, ensure the U-hook properly engages with the groove in the wiper head until you hear a 'click' sound indicating it's locked. After installation, test them with windshield washer fluid - if they skip or leave streaks, they might not be installed correctly. Doing it yourself saves 200-300 yuan compared to dealership service, takes about 10 minutes, and requires no tools except your hands. Before rainy season, check the rubber blades for wear - replace them if they don't clean properly, as safety comes first.
