How to Replace the Wiper Blades on a New Santana?

[LaKiara]

Method for replacing wiper blades on a New Santana: 1. Press the clip onto the pin in the middle of the wiper blade; 2. Insert the U-shaped wiper arm into the clip and press down firmly; 3. After ensuring it is fully seated, straighten the wiper blade and gently place it on the windshield. Wiper inspection method: Spray some cleaning fluid, then turn on the wipers, observe whether the movement is smooth, and listen for any loud noises from the wipers. If there are loud noises, it indicates the wiper is pressing too hard against the glass and requires proper adjustment. Precautions for replacing wiper blades: 1. Confirm the correct model when purchasing; 2. Check if the wiper arm is compatible; 3. Ensure the wiper blade is the correct length; 4. Inspect for any damage; 5. Check if the wiper maintains a consistent speed; 6. Look for uneven movement or missed spots; 7. Pay attention to any abnormal motor sounds.

[LeBennett]

I found that replacing the wiper blades on the new Santana is actually quite simple, and I can usually do it myself. The first step is to lift the wiper arm, and it's best to place a towel on the windshield when gently raising it to prevent the arm from suddenly snapping back and scratching the glass. The wiper arms on the new Santana typically feature a U-hook design—just locate the small locking tab, press or slide it, and the old wiper blade will come loose. After removing the old one, check that the hook is free of rust, then align and hook the new wiper blade into place. A ‘click’ sound confirms it’s locked. Remember to match the size when buying new wiper blades; the front windshield of the new Santana usually requires around 26-inch and 18-inch blades (check the model online to confirm). After installation, spray some water to test, ensuring smooth wiping without streaks. Regular replacements like this can save a lot of money and prevent visibility issues during rainy days.

[Jeremy]

Replacing wiper blades yourself can save you dozens of dollars, which I find particularly practical for my New Santana. Be careful when lifting the wiper arm—don't use too much force to avoid damaging the windshield. The U-hook design is quite common; see that button near the connector? Press it to remove the old wiper. The key to installing the new one is aligning it properly and gently pushing it in until you hear a click. I recommend purchasing high-quality wiper blades, checking your owner's manual or entering your car model in online stores for the correct size. I also regularly clean the wiper blades to extend their lifespan and replace them before the rainy season—it's simple and safe. Over time, this small routine keeps the wipers working efficiently, ensuring much clearer driving visibility.

[SawyerLee]

When the wipers fail while driving, visibility can be severely compromised. When I replaced the ones on my new Santana, I paid special attention to safety. Always turn off the engine before lifting the wiper arms to prevent accidental activation, and place a soft cloth on the windshield for protection. Removing the old wipers is straightforward—just press the locking tab and they come right off. When installing the new hooks, make sure to align them at the correct angle; applying too much force might damage the arm head. Always choose wipers of the correct size to ensure they move freely after installation. After replacement, test the water wiping effect to ensure even coverage, and you can drive with peace of mind.