How to Replace the Wiper Blades on a Mercedes-Benz E-Class?
2 Answers
To remove the original wiper blades, first lift the wiper arm. Press the clip underneath and slide out the wiper blade. Remove the original wiper blade from one side, but be very careful not to let the wiper arm snap back and damage the windshield. Slightly lift the front end of the middle clip to make installation easier. After inserting the middle clip, pull it tight! You'll hear a click when it's properly seated. When installing the passenger-side wiper blade, pay attention to the direction! Similarly, pull it tight until you hear a click.
Replacing the wiper blades on a Mercedes-Benz E-Class is actually quite simple. First, I must remind you not to rush into it—ensure the car is turned off and the wiper control switch is closed to prevent the wiper arm from automatically snapping back and causing injury or damage. Prepare some tissues or a cloth to clean the windshield and the wiper arm connection area to avoid dust affecting the new wiper. Lift the wiper arm, gently release the clip or small button (usually by pressing the side), and then slide off the old wiper. Remember that the common sizes for the Mercedes-Benz E-Class are 26 inches and 20 inches, so make sure to buy the correct new wiper blades. Align them with the slot and snap them firmly into place. When testing, don’t rush to wipe—first spray some windshield washer fluid to check for smooth operation. After replacement, remember to inspect the wiper rubber for cracks every six months and replace them promptly if they’re worn out to ensure safer driving visibility. My first time replacing them took less than 10 minutes—online videos make it easy to understand, so don’t be afraid to try!
