How to Replace the Wiper Blades on a Lavida?
3 Answers
The method for replacing the wiper blades on a Lavida is as follows: 1. After turning off the vehicle, do not remove the key immediately. Within 3 seconds, pull the wiper control lever inward, and the wipers will move to the maintenance position. 2. Gently pull the wiper arm toward the front of the vehicle until it locks into place. Press the silver button on the wiper arm, hold the wiper blade, and pull it outward with slight force to remove the old rubber blade. 3. Release the two clips and remove the old rubber blade. 4. When installing the new rubber blade, remember to stagger the two metal pieces and ensure it is inserted into the first groove. The process is slightly tedious and requires patience; install one side first before proceeding to the other. 5. After successful installation, follow the reverse order of the removal steps to complete the wiper blade installation.
I'm quite familiar with changing wiper blades! My Lavida has had its wipers replaced three times. First, turn the key to the power-on position and then turn it off, quickly push the wiper lever downward, and the wipers will stand up and lock in the maintenance position. Then press the small square button on the wiper arm connector and push it downward to remove the blade. Remember to buy wiper blades specifically designed for your car model, as connectors come in several types like U-hook and straight plug. Last time I bought cheap aftermarket blades, and they started skipping and making noise after two months. When reinstalling, make sure you hear the click sound indicating it's locked in place, and gently place it back on the windshield without slamming it. Changing wiper blades takes just ten minutes, saving over 200 yuan compared to going to the 4S shop. It's best to replace them before the rainy season; driving in heavy rain with poor visibility is too dangerous.
Helped the elderly neighbor replace the wiper blades on his Lavida. The old man couldn't figure out the clips. First, you need to lift the wiper arm: turn off the engine and immediately press the washer button, then quickly lift it before it returns to position. You can see a silver U-shaped hook at the connection point, and there's a raised plastic piece on the back of the clip. Pinch both sides of the clip and slide it downward—don't pull it hard. When installing new wiper blades, pay attention to the orientation; the arrow on the rubber strip should match the original direction. Place a thick towel on the windshield in case the wiper arm snaps back and cracks the glass. After replacement, remember to spray some washer fluid to test it and check for any blind spots. It's simple to do it yourself, but ladies with long nails should wear gloves to avoid scratching their hands.
